Professional JTAG/SWD Debug Probe with Dual Interface Connectivity
The SEGGER J-Link PRO is a high-performance debug probe that combines USB and Ethernet interfaces for maximum flexibility in embedded development. With download speeds up to 4 MB/s and support for remote debugging via Ethernet, this probe is ideal for professional development environments and test farms.
Key Technical Features
- Dual Interface: USB 2.0 Hi-Speed and 100 Mbit/s Ethernet
- Target Interface: JTAG/SWD 20-pin standard connector
- Download Speed: Up to 4 MB/s via Ethernet, 3 MB/s via USB
- Target Voltage: 1.2V to 5V with automatic level detection
Wiring Quick-Start
Pin | Signal | Description |
---|---|---|
1 | VTRef | Target voltage reference (1.2V-5V) |
2 | NC | Not connected |
3 | nRST | Target reset (open drain) |
5 | TDI | JTAG data input |
7 | TMS/SWDIO | Test mode select / SWD data I/O |
9 | TCK/SWCLK | Test clock / SWD clock |
13 | TDO/SWO | JTAG data output / SWD trace output |
15 | nSRST | System reset (optional) |
19 | VCC | Target power supply (max 300mA) |
4,6,8,10,12,14,16,18,20 | GND | Ground connections |
Ethernet Configuration
The J-Link PRO supports DHCP by default and includes a built-in web server for easy network configuration. Access the configuration interface by connecting to the device's IP address in any web browser.
Software Integration
Compatible with all major IDEs including SEGGER Embedded Studio, Keil µVision, IAR EWARM, Eclipse-based environments, and command-line tools via GDB Server. Includes licenses for:
- Unlimited Flash Breakpoints
- SEGGER Ozone debugger
- J-Flash programming software
- Real-Time Transfer (RTT) technology