Thermo K Click Board™

MIKROE-2501
Regular price
£25.90
Sale price
£25.90
Regular price
£37.00
Sold out
Unit price
Quantity must be 1 or more

Temperature Range

With the Type-K Probe, available in our store, this click can measure temperature up to +480 °C. With a different probe it can theoretically measure temperature up to +1372 °C.

The Thermo K Click Board™ has a PCC-SMP thermocouple connector onboard, suitable for all K-type probes.

Microchip MCP9600

The MCP9600 IC converts thermocouple EMF to degree Celsius with integrated Cold-Junction compensation. It corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±1.5°C accurate temperature data.

4 Alert Outputs

The Thermo K Click Board™ has 4 alert outputs onboard that can be used to detect multiple temperature zones. You can define on which specific temperature the THERMO K click will send an alarm.

Low Power Modes

Low-Power modes are available for battery-powered applications. In shut-down mode the module uses only 2 µA.

THERMOCOUPLE PROBE

To use the Thermo K Click Board™ you need to connect the appropriate K-type thermocouple probe (not included in the package) into the PCC-SMP connector.

Note: We offer the Thermocouple Type-K Glass Braid Insulated probes.

APPLICATION

Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc.

SPECIFICATIONS

Type Temperature & humidity
Applications Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc.
On-board modules MCP9600 IC from Microchip
Key Features Operating Current: 300 µA, Shutdown Current: 2 µA
Interface GPIO,I2C
Compatibility mikroBUS
Click board size M (42.9 x 25.4 mm)
Input Voltage 3.3V or 5V

The Thermo K Click Board™ carries the MCP9600 IC from Microchip and and depending on the type of probe it uses, the click can measure temperatures from −200 °C to +1372 °C. The Thermo K Click Board™ is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface.

Pinout Diagram

This table shows how the pinout on the Thermo K Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Pin Notes
Alert 4 output Alert 4 1 AN PWM 16 ALERT2 Alert 2 output
Alert 3 output ALERT3 2 RST INT 15 ALERT1 Alert 1 output
NC 3 CS TX 14 NC
NC 4 SCK RX 13 NC
NC 5 MISO SCL 12 SCL I2C Clock
NC 6 MOSI SDA 11 SDA I2C Data
Power supply +3.3V 7 +3.3V +5V 10 +5V Power supply
Ground GND 8 GND GND 9 GND Ground

Jumpers and Settings

Designator Name Default Position Default Option Description:
JP1 PWR.SEL. Left 3V3 Power Supply Voltage Selection 3V3/5V, left position 3v3, right position 5V
JP2 ADDR. SEL. Right GND I2C address Selection. Left position (VDD) is 1100111x and right position (GND) is 1100000x .
Go to full site