WiFi 7 Click Board™

MIKROE-2046
Regular price
£24.50
Sale price
£24.50
Regular price
£35.00
Sold out
Unit price
Quantity must be 1 or more

The WiFi 7 Click Board™ is based on the Atmel ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. The Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, INT, RST.

ATWINC1510-MR210PB Features

The ATWINC1510-MR210PB is a low-power consumption 802.11 b/g/n module which is specifically optimized for low-power IoT applications.

The module has a Cortus APS3 32-bit processor. This processor performs many of the MAC functions, including but not limited to association, authentication, power management, security key management, and MSDU aggregation/de-aggregation. In addition, the processor provides flexibility for various modes of operation, such as STA and AP modes.

MODULE CURRENT CONSUMPTION

The table below describes the current consumption of the ATWINC1510-MR210PB module:

Device state Code rate Output power, dBm Current consumption(1)
I I
ON_Transmit 802.11b 11Mbps 20.5 290mA 22mA
802.11b 11Mbps 19.5 294mA 22mA
802.11g 6Mbps 19.5 292mA 22mA
802.11b 54Mbps 17.5 250mA 22mA
802.11n MCS 0 18.0 244mA 22mA
802.11n MCS 7 15.5 289mA 22mA
ON_Receive 802.11b 1Mbps N/A 52.5mA 22mA
802.11b 11Mbps N/A 52.5mA 22mA
802.11g 6Mbps N/A 55.0mA 22mA
802.11b 54Mbps N/A 57.5mA 22mA
802.11n MCS 0 N/A 54.0mA 22mA
802.11n MCS 7 N/A 58.5mA 22mA
ON_Doze N/A N/A 380µA <3.5µA
Power_Down N/A N/A <0.5µA <3.5µA

ADDITIONAL PINS

Additional pins on the WiFi 7 Click Board™, besides the ones on the mikroBUS™ line:

Go to full site