| Model | iDSO1070A |
| Bandwidth | 70MHz |
| Channels | 2 |
| Real-time Sampling Rate | 250MSa/s (single channel), 125MSa/s (two channels) |
| Sampling Mode | Sampling, Vmax, Vrms |
| Average Sampling | Average waveform, times: 4, 8, 16, 32, 64, 128 |
| Memory Depth | 6K |
| Rise time | ≤5ns |
| Time Base Precision | ±50ppm |
| Time Base Range | 45s/div-500s/div (1-2-4 sequences) |
| Input Coupling | DC, AC, GND |
| Input Impedance | Resistance: 1MΩ; Capacitance：25pF |
| Probe Attenuation Coefficient Setting | 1×, 10×, 100×, x1000 |
| Max Input Voltage | 35Vpk(DC+peak) |
| Waveform Interpolation | Step, Linear, Sin(x)/x |
| Input Sensitivity | 10mV/div～5V/div |
| Vertical Resolution | 8-bit |
| Vertical Displacement Range | 10mV ~ 5V/div @ x1 probe; 100mV ~ 50V/div @ x10 probe; |
| 1V ~ 500V/div @ x100 probe; 10V ~ 5KV/div @ x1000 probe |
| Position Range | ±4division |
| Low Frequency Response | ≤10Hz (at input BNC) |
| DC Gain Accuracy | ±3% |
| Bandwidth Limit | 20MHz |
| Trigger Mode | Auto, normal, single |
| Trigger Type | Edge, Alternative |
| Trigger Precision | ±4division |
| Trigger Range | ±4V |
| Trigger Sensitivity | 0.02 division |
| Trigger Source | CH1, CH2, EXT |
| Waveform Signal Process | +,-,x,÷,FFT, invert |
| Temperature | Operating: 0℃-40℃; Non-operating: -20℃-60℃ |
| Humidity | Below 35℃, ≤90% relative humidity; 35℃-40℃, ≤60% relative humidity |
| Cursors Measurement | Cross, Trace, Horizontal, Vertical |
| Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width and Duty Cycle |
| Volume | 190mm * 100mm * 35mm |
| Weight | 0.7KG |
| Accessories | 2 passive probes -PP80
|