# Title: ADC Click Board™


## Description: The ADC Click Board™ is based on the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface. MCP3204 FEATURES MCP3204 Analog-to-Digital converter features 25k samples/second, four input channels and low power consumption (500nA typical standby, 2µA max). READING ANALOG INPUTS Four analogue input screw terminals exist for each of the supported A/D channels. We added two more terminals for GND reference. Each analogue input voltage is converted to an appropriate 12-bit digital value, which can be read using an industry-standard SPI communication interface. SPECIFICATIONS Type ADC Applications The ADC Click Board™ can be used in applications such as data acquisition, instrumentation, measurement, etc. On-board modules Analog-to-Digital Converter (ADC) MCP3204 Key Features 12-bit resolution of Analog-to-Digital conversion Interface SPI Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of the ADC Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC NC 2 RST INT 15 NC SPI Chip select CS 3 CS TX 14 NC SPI clock SCK 4 SCK RX 13 NC Serial data output SDO 5 MISO SCL 12 NC Serial data input SDI 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground JUMPERS AND SETTINGS Designator Name Default Position Default Option Description JP1 PWR SEL Left 3V3 Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V JP2 Reference VCC 4.096V Reference voltage selection There are two zero-ohm resistors (SMD jumpers): PWR SEL is used to determine whether a 5V or 3.3V power supply is used, and REFERENCE to select either VCC or 4.096V as the voltage reference.


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: ADC, ADC Click, Click Board, MikroE, Mixed Signal


## Price range: 20.3 - 20.3 GBP


## Link: https://thedebugstore.com/products/mikroe-922-adc-click-board-uk


## Compare-at price range: 29.0 - 29.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Mixed Signal Click Boards™](https://thedebugstore.com/a/llms/collections/mixed-signal-click-boards-catalogue-uk)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [ADC Click Boards™](https://thedebugstore.com/a/llms/collections/adc-click-boards-catalogue-uk)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-922, Available: yes, Inventory: 4


## Metafields 

- full_description: <p>The <strong>ADC Click Board™</strong> is based on the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface.</p>

<h3>MCP3204 FEATURES</h3>

<p>MCP3204 Analog-to-Digital converter features 25k samples/second, four input channels and low power consumption (500nA typical standby, 2µA max).</p>

<h3>READING ANALOG INPUTS</h3>

<p>Four analogue input screw terminals exist for each of the supported A/D channels. We added two more terminals for GND reference. Each analogue input voltage is converted to an appropriate 12-bit digital value, which can be read using an industry-standard SPI communication interface.</p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>ADC</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>The <strong>ADC Click Board™</strong> can be used in applications such as data acquisition, instrumentation, measurement, etc.</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>Analog-to-Digital Converter (ADC) MCP3204</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>12-bit resolution of Analog-to-Digital conversion</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>SPI</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>M (42.9 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<h3>PINOUT DIAGRAM</h3>

<p>This table shows how the pinout of the<strong> ADC Click Board™</strong> corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table>
    <tbody>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" data-entity-type="" data-entity-uuid="" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
        <tr>
            <td>NC</td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>SPI Chip select</td>
            <td>CS</td>
            <td>3</td>
            <td>CS</td>
            <td>TX</td>
            <td>14</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>SPI clock</td>
            <td>SCK</td>
            <td>4</td>
            <td>SCK</td>
            <td>RX</td>
            <td>13</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Serial data output</td>
            <td>SDO</td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Serial data input</td>
            <td>SDI</td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Power supply</td>
            <td><strong>+3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td><strong>+5V</strong></td>
            <td>Power supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>JUMPERS AND SETTINGS</h3>

<table>
    <tbody>
        <tr>
            <th>Designator</th>
            <th>Name</th>
            <th>Default Position</th>
            <th>Default Option</th>
            <th>Description</th>
        </tr>
        <tr>
            <td>JP1</td>
            <td>PWR SEL</td>
            <td>Left</td>
            <td>3V3</td>
            <td>Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V</td>
        </tr>
        <tr>
            <td>JP2</td>
            <td>Reference</td>
            <td>VCC</td>
            <td>4.096V</td>
            <td>Reference voltage selection</td>
        </tr>
    </tbody>
</table>

<p><br />
There are two zero-ohm resistors (SMD jumpers): PWR SEL is used to determine whether a 5V or 3.3V power supply is used, and REFERENCE to select either VCC or 4.096V as the voltage reference.</p>

- description_tag: The ADC Click Board™ carries the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface. Available from Debug Store UK.
- title_tag: MikroE ADC Click Board™ (MIKROE-922)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: ADC Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 21.12
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 23.8656
- amazon_fr_currency: EUR
- amazon_fr_price: 23.8656
- amazon_es_currency: EUR
- amazon_es_price: 23.8656
- amazon_nl_currency: EUR
- amazon_nl_price: 23.8656
- amazon_it_currency: EUR
- amazon_it_price: 23.8656
- amazon_se_curency: SEK
- amazon_se_price: 240.768
- amazon_product_id: 8606015073231
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The ADC Click Board™ carries the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface.>
- amazon_long_description: <h2>IC/module: MCP3204 Analog-to-Digital Converter</h2><p>ADC Click is designed using MCP3204, a 12-bit Analog-to-Digital Converter. The MCP3204 is programmable to provide two pseudo-differential input pairs or four single-ended inputs. It establishes communication with the devices using a simple serial interface compatible with the SPI protocol. It is capable of conversion rates of up to 100 ksps.</p><h2>Why ADC Click is needed'</h2><p>The ADC Click is needed to provide a link between the analog world of transducers and the digital world of signal processing and data handling. This accessory board allows for multiple connections with the help of its 12-bit ADC that engages itself in quantization of the input and converts the voltage periodically that is sampling the input, thereby facilitating the process of data integration.</p><h2>SMD Jumpers</h2><p>The ADC Click Board™ comprises of two zero-ohm SMD jumpers: PWR SEL and REFERENCE. PWR SEL allow the user to select a 5V or 3.3V power supply. The REFERENCE enable user selection of either VCC or 4.096V as the voltage reference.</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-mikroe-click-adc-front.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-mikroe-click-adc-back.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-mikroe-click-adc-connected.jpg
- amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-mikroe-click-adc-back.jpg
- amazon_other_image_4: https://www.thedebugstore.com/images/product/lg-mikroe-click-adc-connected.jpg
- amazon_browse_node: 428655031
- related_products: MIKROE-4105,MIKROE-3394,MIKROE-3115,MIKROE-2932,MIKROE-2846,MIKROE-2879,MIKROE-1894,MIKROE-1893
- mpn: MIKROE-922
- backorder_label: If no stock shown above, check availability
- google_product_category: 222
- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/af81bde6b785--adc-click-schematic-1-ecb8a8.pdf?v=1630048207\">ADC Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/af81bde6b785--MCP3204-1-344e7b.pdf?v=1630048390\">Microchip MCP3204 12-bit ADC Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- condition: new
- custom_product: false
- mpn: MIKROE-922
- google_product_category: Electronics
- custom_label_0: Click Board
- myordercount: {"ordercount":1,"recentcount":1}
- device_vendor: Microchip Technology
- device_type: MCP3204-CI/SL
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-10T17:42:11Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- target_keyword: ADC Click Board
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241545314493"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"ADC Click Board™","bold":true},{"type":"text","value":" is based on the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"MCP3204 FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"MCP3204 Analog-to-Digital converter features 25k samples/second, four input channels and low power consumption (500nA typical standby, 2µA max)."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"READING ANALOG INPUTS"}]},{"type":"paragraph","children":[{"type":"text","value":"Four analogue input screw terminals exist for each of the supported A/D channels. We added two more terminals for GND reference. Each analogue input voltage is converted to an appropriate 12-bit digital value, which can be read using an industry-standard SPI communication interface."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nADC\nApplications\nThe ADC Click Board™ can be used in applications such as data acquisition, instrumentation, measurement, etc.\nOn-board modules\nAnalog-to-Digital Converter (ADC) MCP3204\nKey Features\n12-bit resolution of Analog-to-Digital conversion\nInterface\nSPI\nCompatibility\nmikroBUS\nClick board size\nM (42.9 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the"},{"type":"text","value":" ADC Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nNC\nNC\n2\nRST\nINT\n15\nNC\nSPI Chip select\nCS\n3\nCS\nTX\n14\nNC\nSPI clock\nSCK\n4\nSCK\nRX\n13\nNC\nSerial data output\nSDO\n5\nMISO\nSCL\n12\nNC\nSerial data input\nSDI\n6\nMOSI\nSDA\n11\nNC\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"JUMPERS AND SETTINGS"}]},{"type":"paragraph","children":[{"type":"text","value":"Designator\nName\nDefault Position\nDefault Option\nDescription\nJP1\nPWR SEL\nLeft\n3V3\nPower Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V\nJP2\nReference\nVCC\n4.096V\nReference voltage selection"}]},{"type":"paragraph","children":[{"type":"text","value":""},{"type":"text","value":"There are two zero-ohm resistors (SMD jumpers): PWR SEL is used to determine whether a 5V or 3.3V power supply is used, and REFERENCE to select either VCC or 4.096V as the voltage reference."}]}]}
- summary: <p>The <strong><em>ADC Click Board™</em> </strong>carries the MCP3204 12-bit Analog-to-Digital converter. The Click Board™ is designed to run on 3.3V by default. Place PWR SEL SMD jumper to 5V position if used with 5V systems. It communicates with the target microcontroller over SPI interface.</p>