# Title: Nano LR Click Board™
## Description: How Does The Nano LR Click Board™ Nano LR Click Board™ Work? The Nano LR Click Board™, as its foundation uses the EMB-LR1276S, a sub-1GHz wireless module that supports the LoRaWAN long-range wireless protocol based on the SAMR34 SiP from Embit. It offers a long-range spread spectrum communication with high interference immunity. Nano LR Click is ideal for use in various applications, such as IoT, home and building automation, wireless alarm and security systems, automated meter reading, industrial monitoring and control, and more. The EMB-LR1276S can be configured as an embedded microsystem or a simple data modem for low power applications in the 868MHz and 915MHz radio bands. It is equipped with up to 256 KB of Flash and up to 40 KB of SRAM and it supports long-range and FSK modulation. The Nano LR Click Board™ communicates with MCU using the UART interface with commonly used UART RX and TX pins with the hardware flow control pins UART CTS, RTS, RI (Clear to Send, Ready to Send, and Ring Indicator). Besides these pins, Nano LR Click has also GP1 and STAT pins, which are routed to the PWM and AN pins of the mikroBUS™ socket, respectively. STAT pin is also wired to a separate LED indicator labelled as STAT to enable quick and easy module status indication. The Nano LR Click Board™ features the U.FL antenna connector with an impedance of 50Ω, so it can be equipped with the appropriate antenna that MikroE has in its offer. The Nano LR Click Board™ is designed to work with 3.3V only. When using it with MCUs that use 5V levels for their communication, a proper level translation circuit should be used. SPECIFICATIONS Type LoRa Applications Can be used for developing highly integrated long-range IoT networks, security systems, alarm networks, and similar applications that require simple and reliable networking solutions On-board modules EMB-LR1276S - a sub-1GHz wireless module that supports the LoRaWAN long-range wireless protocol from Embit Radio Region Worldwide Key Features Low power consumption, 868MHz and 915MHz radio bands, 256 KB of Flash, up to 40 KB of SRAM, long-range and FSK modulation, and more. Interface UART Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout of the Nano LR Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes Status ST 1 AN PWM 16 GP1 General Purpose I/0 pin Reset RST 2 RST INT 15 RTS UART Ready-To-Send UART Clear-To-Send CTS 3 CS RX 14 TX UART TX NC 4 SCK TX 13 RX UART RX NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power Supply 3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR - Power LED Indicator LD2 STAT - Status LED Indicator NANO LR CLICK ELECTRICAL SPECIFICATIONS Description Min Typ Max Unit Supply Voltage - 3.3 - V Operating Frequency Range 815 868 915 MHz Operating Temperature Range -40 +25 +85 °C
## Product type: Click Board
## Vendor: Mikroelektronika d.o.o.
## Tags: Click Board, Embit, LoRa, MikroE, Wireless
## Price range: 45.5 - 45.5 GBP
## Link: https://thedebugstore.com/products/mikroe-4514-nano-lr-click-board
## Compare-at price range: 65.0 - 65.0 GBP
## Options
- Title: Default Title
## Collections
- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Embit Device Support Boards & Tools | Debug Store](https://thedebugstore.com/a/llms/collections/embit-device-support-uk)
- [Wireless Interface Click Boards™](https://thedebugstore.com/a/llms/collections/wireless-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [LoRa Click Boards™](https://thedebugstore.com/a/llms/collections/lora-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)
## Variants
- Default Title, SKU: MIKROE-4514, Available: yes, Inventory: 1
## Metafields
- title_tag: MikroE Nano LR Click Board™ (MIKROE-4514)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- backorder_label: If no stock shown above, check availability
- mpn: MIKROE-4514
- description_tag: Looking for a reliable solution for long-range IoT networks? Try Nano LR Click Board™ - a compact add-on board with advanced EMB-LR1276S RF technology-based SRD transceiver. Order yours today!
- full_description: How Does The Nano LR Click Board™ Nano LR Click Board™ Work?
The Nano LR Click Board™, as its foundation uses the EMB-LR1276S, a sub-1GHz wireless module that supports the LoRaWAN long-range wireless protocol based on the SAMR34 SiP from Embit. It offers a long-range spread spectrum communication with high interference immunity. Nano LR Click is ideal for use in various applications, such as IoT, home and building automation, wireless alarm and security systems, automated meter reading, industrial monitoring and control, and more.
The EMB-LR1276S can be configured as an embedded microsystem or a simple data modem for low power applications in the 868MHz and 915MHz radio bands. It is equipped with up to 256 KB of Flash and up to 40 KB of SRAM and it supports long-range and FSK modulation.
The Nano LR Click Board™ communicates with MCU using the UART interface with commonly used UART RX and TX pins with the hardware flow control pins UART CTS, RTS, RI (Clear to Send, Ready to Send, and Ring Indicator). Besides these pins, Nano LR Click has also GP1 and STAT pins, which are routed to the PWM and AN pins of the mikroBUS™ socket, respectively. STAT pin is also wired to a separate LED indicator labelled as STAT to enable quick and easy module status indication.
The Nano LR Click Board™ features the U.FL antenna connector with an impedance of 50Ω, so it can be equipped with the appropriate antenna that MikroE has in its offer.
The Nano LR Click Board™ is designed to work with 3.3V only. When using it with MCUs that use 5V levels for their communication, a proper level translation circuit should be used.
SPECIFICATIONS
| Type |
LoRa |
| Applications |
Can be used for developing highly integrated long-range IoT networks, security systems, alarm networks, and similar applications that require simple and reliable networking solutions |
| On-board modules |
EMB-LR1276S - a sub-1GHz wireless module that supports the LoRaWAN long-range wireless protocol from Embit |
| Radio Region |
Worldwide |
| Key Features |
Low power consumption, 868MHz and 915MHz radio bands, 256 KB of Flash, up to 40 KB of SRAM, long-range and FSK modulation, and more. |
| Interface |
UART |
| Compatibility |
mikroBUS |
| Click board size |
S (28.6 x 25.4 mm) |
| Input Voltage |
3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the Nano LR Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes |
Pin |
 |
Pin |
Notes |
| Status |
ST |
1 |
AN |
PWM |
16 |
GP1 |
General Purpose I/0 pin |
| Reset |
RST |
2 |
RST |
INT |
15 |
RTS |
UART Ready-To-Send |
| UART Clear-To-Send |
CTS |
3 |
CS |
RX |
14 |
TX |
UART TX |
| NC |
4 |
SCK |
TX |
13 |
RX |
UART RX |
| NC |
5 |
MISO |
SCL |
12 |
NC |
| NC |
6 |
MOSI |
SDA |
11 |
NC |
| Power Supply |
3.3V |
7 |
3.3V |
5V |
10 |
NC |
| Ground |
GND |
8 |
GND |
GND |
9 |
GND |
Ground |
ONBOARD SETTINGS AND INDICATORS
| Label |
Name |
Default |
Description |
| LD1 |
PWR |
- |
Power LED Indicator |
| LD2 |
STAT |
- |
Status LED Indicator |
NANO LR CLICK ELECTRICAL SPECIFICATIONS
| Description |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
- |
3.3 |
- |
V |
| Operating Frequency Range |
815 |
868 |
915 |
MHz |
| Operating Temperature Range |
-40 |
+25 |
+85 |
°C |
- google_product_category: 2082
- condition: new
- custom_product: false
- mpn: MIKROE-4514
- google_product_category: Electronics
- custom_label_0: Click Board
- examples:
We provide a library for the Nano LR Click Board™ as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.
The package can be downloaded/installed directly from compilers IDE(recommended way), or downloaded from our LibStock, or found on the mikroE Github account.
Library Description
This library contains an API for the Nano LR Click Board™ driver.
Key Functions
void nanolr_cfg_setup ( nanolr_cfg_t *cfg ); - Config Object Initialization function.NANOLR_RETVAL nanolr_init ( nanolr_t *ctx, nanolr_cfg_t *cfg ); - Initialization function.void nanolr_default_cfg ( nanolr_t *ctx ); - Click the Default Configuration function.
Example Description
This example reads and processes data from Nano LR Click Board™s.
The demo application is composed of two sections :
void application_task ( void )
{
#ifdef DEMO_APP_RECEIVER
nanolr_process( );
#endif
#ifdef DEMO_APP_TRANSMITTER
nanolr_send_data( &nanolr, TEXT_TO_SEND, strlen( TEXT_TO_SEND ) );
log_printf( &logger, "The message "%s" has been sent!rn", ( uint8_t * ) TEXT_TO_SEND );
log_printf( &logger, "------------------------------------------------------------rn" );
Delay_ms( 2000 );
#endif
}
The full application code, and ready for use projects can be installed directly from the compiler's IDE (recommended) or found on the LibStock page or mikroE Github account.
Other mikroE Libraries used in the example:
- MikroSDK.Board
- MikroSDK.Log
- Click.NanoLR
Additional Notes and Information
Depending on the development board you are using, you may need a USB UART Click Board™, USB UART 2 Click Board™ or RS232 Click Board™ to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.
MIKROSDK
The Nano LR Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.
- device_vendor: embit
- device_type: EMB-LR1276S/UL
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: No reviews
- widget:
- target_keyword: Nano LR Click Board
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241546166461"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The Nano LR Click Board™ Nano LR Click Board™ Work?"}]},{"type":"paragraph","children":[{"type":"text","value":"The"},{"type":"text","value":" Nano LR Click Board™","bold":true},{"type":"text","value":", as its foundation uses the EMB-LR1276S, a sub-1GHz wireless module that supports the LoRaWAN long-range wireless protocol based on the SAMR34 SiP from Embit. It offers a long-range spread spectrum communication with high interference immunity. Nano LR Click is ideal for use in various applications, such as IoT, home and building automation, wireless alarm and security systems, automated meter reading, industrial monitoring and control, and more."}]},{"type":"paragraph","children":[{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"The EMB-LR1276S can be configured as an embedded microsystem or a simple data modem for low power applications in the 868MHz and 915MHz radio bands. It is equipped with up to 256 KB of Flash and up to 40 KB of SRAM and it supports long-range and FSK modulation."}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Nano LR Click Board™","bold":true},{"type":"text","value":" communicates with MCU using the UART interface with commonly used UART RX and TX pins with the hardware flow control pins UART CTS, RTS, RI (Clear to Send, Ready to Send, and Ring Indicator). Besides these pins, Nano LR Click has also GP1 and STAT pins, which are routed to the PWM and AN pins of the mikroBUS™ socket, respectively. STAT pin is also wired to a separate LED indicator labelled as STAT to enable quick and easy module status indication."}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Nano LR Click Board™","bold":true},{"type":"text","value":" features the U.FL antenna connector with an impedance of 50Ω, so it can be equipped with the appropriate antenna that MikroE has in its offer."}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Nano LR Click Board™","bold":true},{"type":"text","value":" is designed to work with 3.3V only. When using it with MCUs that use 5V levels for their communication, a proper level translation circuit should be used."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nLoRa\nApplications\nCan be used for developing highly integrated long-range IoT networks, security systems, alarm networks, and similar applications that require simple and reliable networking solutions\nOn-board modules\nEMB-LR1276S - a sub-1GHz wireless module that supports the LoRaWAN long-range wireless protocol from Embit\nRadio Region\nWorldwide\nKey Features\nLow power consumption, 868MHz and 915MHz radio bands, 256 KB of Flash, up to 40 KB of SRAM, long-range and FSK modulation, and more.\nInterface\nUART\nCompatibility\nmikroBUS\nClick board size\nS (28.6 x 25.4 mm)\nInput Voltage\n3.3V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"Nano LR Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\n\nPin\nNotes\nStatus\nST\n1\nAN\nPWM\n16\nGP1\nGeneral Purpose I/0 pin\nReset\nRST\n2\nRST\nINT\n15\nRTS\nUART Ready-To-Send\nUART Clear-To-Send\nCTS\n3\nCS\nRX\n14\nTX\nUART TX\nNC\n4\nSCK\nTX\n13\nRX\nUART RX\nNC\n5\nMISO\nSCL\n12\nNC\nNC\n6\nMOSI\nSDA\n11\nNC\nPower Supply\n3.3V\n7\n3.3V\n5V\n10\nNC\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ONBOARD SETTINGS AND INDICATORS"}]},{"type":"paragraph","children":[{"type":"text","value":"Label\nName\nDefault\nDescription\nLD1\nPWR\n-\nPower LED Indicator\nLD2\nSTAT\n-\nStatus LED Indicator"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"NANO LR CLICK ELECTRICAL SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Description\nMin\nTyp\nMax\nUnit\nSupply Voltage\n-\n3.3\n-\nV\nOperating Frequency Range\n815\n868\n915\nMHz\nOperating Temperature Range\n-40\n+25\n+85\n°C"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]}]}
- summary: Introducing the Nano LR Click Board™
Looking for a reliable solution for developing long-range IoT networks or security systems? Look no further than the Nano LR Click Board™, a compact add-on board that contains a long-range transceiver. With its advanced EMB-LR1276S RF technology-based SRD transceiver, this board can achieve long-range communication that is immune to interferences, thanks to its spread spectrum modulation feature and low power consumption.
Features
The Nano LR Click Board™ features:
- EMB-LR1276S RF technology-based SRD transceiver
- Frequency of 868MHz from Embit
- Spread spectrum modulation feature
- Low power consumption
- Compact design
- Fully tested and ready to use
Benefits
There are many benefits to choosing the Nano LR Click Board™, including:
- Easy and reliable solution for developing long-range IoT networks, security systems, alarm networks, and more
- Supported by a mikroSDK compliant library that simplifies software development
- Comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket
Order Your Nano LR Click Board™ Today
If you're looking for a reliable and easy-to-use solution for developing long-range IoT networks or security systems, the Nano LR Click Board™ is the perfect choice. Order yours today and experience the benefits of this innovative technology for yourself.