# Title: XPRO-Adapter Click Board™
## Description: How Does The XPRO-Adapter Click Board™ Work? The XPRO-Adapter Click Board™ enables a mikroBUS™ 18-pin connector to interface with any Xplained Pro standard 20-pin extension boards from Microchip. Main goal of this boards is to provide interface between this two sockets at the same time offering the flexibility in reconfiguring I/O pinout between this two connectors. This is enabled on extended/duplicated headers so can customize pinout by removing jumpers and using wires to remap board default pinot. All Xplained Pro boards have one or more dual row, 20-pin, 100mil female extension header. Note that all pins are not always connected. All connected pins follow the defined pin-out description in the table Below which you can find on the XPRO-Adapter Click silkscreen. As mentioned the extension headers can be used to connect a variety of Xplained Pro extensions to mirkoBUS MCU boards or to access the pins of the target MCU on Xplained Pro MCU boards directly. This boards supports all standard communication interfaces which you may find on expansion boards such as SPI, I2C, UART, PWM (+/-), Analog (+/-). The ID pin which serves as communication line to the ID chip on an Xplaned Pro expansion boards is routed to the expanded mikroBUS connector and can be accessed and remapped if needed by using wire jumpers. The same goes for PWM lines which are available on the board however they need to be remapped to the appropriate mikroBUS pins before usage. It is designed to be operated only with 3.3V logic levels. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V. SPECIFICATIONS Type Adapter Applications The XPRO-Adapter Click Board™ connects Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards On-board modules Xplained Pro boards have one or more dual row, 20-pin, 100mil female extension header Key Features Support for many serial interfaces, 3.3V logic operation, remappable and configurable I/O's Interface Analog,GPIO,I2C,PWM,SPI,UART Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout of the XPRO-Adapter Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes Analog AN 1 AN PWM 16 PWM External sync Reset RST 2 RST INT 15 INT Interrupt SPI Chip Select CS 3 CS RX 14 TX UART TX SPI Clock SCK 4 SCK TX 13 RX UART RX SPI Data OUT SDO 5 MISO SCL 12 SCL I2C Clock SPI Data IN SDI 6 MOSI SDA 11 SDA I2C Data Power Supply 3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR - Power LED Indicator J2 - - Xplained Pro Remap Header J3-4 - - Extendend mikroBUS Remap Header
## Product type: Click Board
## Vendor: Mikroelektronika d.o.o.
## Tags: Adapter, Atmel, Click Board, Interface, MikroE, Serial Interface
## Price range: 9.8 - 9.8 GBP
## Link: https://thedebugstore.com/products/mikroe-4123-xpro-adapter-click-board-uk
## Compare-at price range: 14.0 - 14.0 GBP
## Options
- Title: Default Title
## Collections
- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Atmel Device Support: Development Boards and Tools | Debug Store](https://thedebugstore.com/a/llms/collections/atmel-device-support)
- [Serial Interface Click Boards™](https://thedebugstore.com/a/llms/collections/serial-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Google Shopping - invalid product](https://thedebugstore.com/a/llms/collections/google-shopping-valid-products)
- [Interface Click Boards™](https://thedebugstore.com/a/llms/collections/interface-click-boards-catalogue)
- [Adapter Click Boards™](https://thedebugstore.com/a/llms/collections/adapter-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)
## Variants
- Default Title, SKU: MIKROE-4123, Available: yes, Inventory: 1
## Metafields
- full_description: How Does The XPRO-Adapter Click Board™ Work?
The XPRO-Adapter Click Board™ enables a mikroBUS™ 18-pin connector to interface with any Xplained Pro standard 20-pin extension boards from Microchip. Main goal of this boards is to provide interface between this two sockets at the same time offering the flexibility in reconfiguring I/O pinout between this two connectors. This is enabled on extended/duplicated headers so can customize pinout by removing jumpers and using wires to remap board default pinot.
All Xplained Pro boards have one or more dual row, 20-pin, 100mil female extension header. Note that all pins are not always connected. All connected pins follow the defined pin-out description in the table Below which you can find on the XPRO-Adapter Click silkscreen. As mentioned the extension headers can be used to connect a variety of Xplained Pro extensions to mirkoBUS MCU boards or to access the pins of the target MCU on Xplained Pro MCU boards directly.
This boards supports all standard communication interfaces which you may find on expansion boards such as SPI, I2C, UART, PWM (+/-), Analog (+/-). The ID pin which serves as communication line to the ID chip on an Xplaned Pro expansion boards is routed to the expanded mikroBUS connector and can be accessed and remapped if needed by using wire jumpers. The same goes for PWM lines which are available on the board however they need to be remapped to the appropriate mikroBUS pins before usage.
It is designed to be operated only with 3.3V logic levels. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V.
SPECIFICATIONS
| Type |
Adapter |
| Applications |
The XPRO-Adapter Click Board™ connects Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards |
| On-board modules |
Xplained Pro boards have one or more dual row, 20-pin, 100mil female extension header |
| Key Features |
Support for many serial interfaces, 3.3V logic operation, remappable and configurable I/O's |
| Interface |
Analog,GPIO,I2C,PWM,SPI,UART |
| Compatibility |
mikroBUS |
| Click board size |
M (42.9 x 25.4 mm) |
| Input Voltage |
3.3V |
PINOUT DIAGRAM
This table shows how the pinout of the XPRO-Adapter Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes |
Pin |
 |
Pin |
Notes |
| Analog |
AN |
1 |
AN |
PWM |
16 |
PWM |
External sync |
| Reset |
RST |
2 |
RST |
INT |
15 |
INT |
Interrupt |
| SPI Chip Select |
CS |
3 |
CS |
RX |
14 |
TX |
UART TX |
| SPI Clock |
SCK |
4 |
SCK |
TX |
13 |
RX |
UART RX |
| SPI Data OUT |
SDO |
5 |
MISO |
SCL |
12 |
SCL |
I2C Clock |
| SPI Data IN |
SDI |
6 |
MOSI |
SDA |
11 |
SDA |
I2C Data |
| Power Supply |
3.3V |
7 |
3.3V |
5V |
10 |
NC |
| Ground |
GND |
8 |
GND |
GND |
9 |
GND |
Ground |
ONBOARD SETTINGS AND INDICATORS
| Label |
Name |
Default |
Description |
| LD1 |
PWR |
- |
Power LED Indicator |
| J2 |
- |
- |
Xplained Pro Remap Header |
| J3-4 |
- |
- |
Extendend mikroBUS Remap Header |
- description_tag: The XPRO-Adapter Click Board™ is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards. Available from Debug Store UK.
- title_tag: MikroE XPRO-Adapter Click Board™ (MIKROE-4123)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: XPRO-Adapter Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 10.56
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 11.9328
- amazon_fr_currency: EUR
- amazon_fr_price: 11.9328
- amazon_es_currency: EUR
- amazon_es_price: 11.9328
- amazon_nl_currency: EUR
- amazon_nl_price: 11.9328
- amazon_it_currency: EUR
- amazon_it_price: 11.9328
- amazon_se_curency: SEK
- amazon_se_price: 120.384
- amazon_product_id: 8606018717521
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The XPRO-Adapter Click Board™ is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards. The Xplaned Pro expansion header is standardized 20 pin connector which is allowing connection of many Microchip/exAtmel expansion boards. This click also has duplicated Xplaned Pro and mikroBUS headers if reconfiguring is needed for individual boards or pinouts. By using XPRO-Adapter Click you can now use Microchip add-on boards on mikroBUS without additional wiring.For more information about Microchips Xplained PRO evaluation platform and compatibility with our Click board, please visit their official Xplained Boards page.
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-front.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-back.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-fusion.jpg
- amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-shuttle.jpg
- amazon_other_image_4: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-clicker.jpg
- amazon_other_image_5: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-breadboard.jpg
- amazon_other_image_6: https://www.thedebugstore.com/images/product/lg-xpro-adapter-click-breadboard.jpg
- amazon_browse_node: 428655031
- mpn: MIKROE-4123
- backorder_label: If no stock shown above, check availability
- badge: No reviews
- widget:
- google_product_category: 222
- condition: new
- custom_product: false
- mpn: MIKROE-4123
- google_product_category: Electronics
- custom_label_0: Click Board
- attachments: [{"download_file":[{"download_file":"XPRO-Adapter Click Board™ Schematic"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- warranty: 12 months
- brand: MikroE
- key_feature_1: For Connecting Microchip Xplaned Expansion Boards
- manufacturer: Mikroelektronika d.o.o.
- target_keyword: XPRO-Adapter Click Board
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241546100925"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The XPRO-Adapter Click Board™ Work?"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"XPRO-Adapter Click Board™","bold":true},{"type":"text","value":" enables a mikroBUS™ 18-pin connector to interface with any Xplained Pro standard 20-pin extension boards from Microchip. Main goal of this boards is to provide interface between this two sockets at the same time offering the flexibility in reconfiguring I/O pinout between this two connectors. This is enabled on extended/duplicated headers so can customize pinout by removing jumpers and using wires to remap board default pinot."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"All Xplained Pro boards have one or more dual row, 20-pin, 100mil female extension header. Note that all pins are not always connected. All connected pins follow the defined pin-out description in the table Below which you can find on the XPRO-Adapter Click silkscreen. As mentioned the extension headers can be used to connect a variety of Xplained Pro extensions to mirkoBUS MCU boards or to access the pins of the target MCU on Xplained Pro MCU boards directly."}]},{"type":"paragraph","children":[{"type":"text","value":"This boards supports all standard communication interfaces which you may find on expansion boards such as SPI, I2C, UART, PWM (+/-), Analog (+/-). The ID pin which serves as communication line to the ID chip on an Xplaned Pro expansion boards is routed to the expanded mikroBUS connector and can be accessed and remapped if needed by using wire jumpers. The same goes for PWM lines which are available on the board however they need to be remapped to the appropriate mikroBUS pins before usage."}]},{"type":"paragraph","children":[{"type":"text","value":"It is designed to be operated only with 3.3V logic levels. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nAdapter\nApplications\nThe XPRO-Adapter Click Board™ connects Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards\nOn-board modules\nXplained Pro boards have one or more dual row, 20-pin, 100mil female extension header\nKey Features\nSupport for many serial interfaces, 3.3V logic operation, remappable and configurable I/O's\nInterface\nAnalog,GPIO,I2C,PWM,SPI,UART\nCompatibility\nmikroBUS\nClick board size\nM (42.9 x 25.4 mm)\nInput Voltage\n3.3V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"XPRO-Adapter Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nAnalog\nAN\n1\nAN\nPWM\n16\nPWM\nExternal sync\nReset\nRST\n2\nRST\nINT\n15\nINT\nInterrupt\nSPI Chip Select\nCS\n3\nCS\nRX\n14\nTX\nUART TX\nSPI Clock\nSCK\n4\nSCK\nTX\n13\nRX\nUART RX\nSPI Data OUT\nSDO\n5\nMISO\nSCL\n12\nSCL\nI2C Clock\nSPI Data IN\nSDI\n6\nMOSI\nSDA\n11\nSDA\nI2C Data\nPower Supply\n3.3V\n7\n3.3V\n5V\n10\nNC\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ONBOARD SETTINGS AND INDICATORS"}]},{"type":"paragraph","children":[{"type":"text","value":"Label\nName\nDefault\nDescription\nLD1\nPWR\n-\nPower LED Indicator\nJ2\n-\n-\nXplained Pro Remap Header\nJ3-4\n-\n-\nExtendend mikroBUS Remap Header"}]}]}
- summary: The XPRO-Adapter Click Board™ is an adapter board for connecting Microchip Xplaned Pro expansion boards with hundreds of mikroBUS based host boards. The Xplaned Pro expansion header is a standardized 20 pin connector which is allowing the connection of many Microchip/ex Atmel expansion boards. This click also has duplicated Xplaned Pro and mikroBUS headers if reconfiguring is needed for individual boards or pinouts. By using XPRO-Adapter Click you can now use Microchip add-on boards on mikroBUS without additional wiring.