# Title: M-Bus RF 4 Click Board™


## Description: Considering that wireless M-Bus is designed to be a robust, power efficient, long range wireless communication solution that operates in the license-free ISM bands that makes him one of the most ideal industrial protocols. How Does The M-BUS RF 4 Click Board™ Work? The M-BUS RF 4 Click Board™ is a mikroBUS™ add-on board with a 32001324 – 868MHz band TRX module from Mipot. The radio operates at the unlicensed 868 MHz SRD frequency band and has specified serial data rates of up to 115.2 Kbps. This M-BUS RF 4 click is ideal for developing various applications, mainly solutions for water or gas, as well as heat and electricity metering applications, and even on meter and concentrator devices. The module supports various operating modes (S, T, R, C) to meet the requirements of one-way and two-way data communication, in stationary and mobile systems. The embedded stack implemented according to EN13757-4 Standard provides the physical access to the Wireless M-Bus communication. At startup time, the Module reads INTERFACE_SELECTION input pin state, which is routed to the PWM pin (marked SEL on Click board) of the mikroBUS™ socket. This pin should be left unconnected or set to high state to select the UART interface or set to low state to select the SPI interface for communicating with the main MCU. Widely used SPI and UART interfaces allow integration flexibility and easy development of customer products. The module meets all the requirements in the industrial temperature range -40/+85°C. Besides that, the module is also certified according to R&TTED 1999/05/EC and is compliant with the ReACH And ROHS directives. The embedded stack implemented in the module according to EN13757-4 Standard provides the physical access to the Wireless M-Bus communication. M-BUS RF 4 click communicates with the target MCU through the mikroBUS™ UART or SPI interface, with additional functionality provided by IND, SEL, and RTS CS/CTS pins. The M-BUS RF 4 Click Board™ is designed to be operated only with 3.3V logic level. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V. SPECIFICATIONS Type Sub-1 GHz Transceievers Applications The M-BUS RF 4 Click Board™ is designed for gas and water meter, heat or electricity applications On-board modules MIPOT 32001324 RF wireless transceiver Key Features Data rates: 115.2 Kbps serial Interface SPI,UART Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout on the M-BUS RF 4 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes Data Indicate IND 1 AN PWM 16 SEL Communication Selection In NC 2 RST INT 15 RTS UART RTS Chip Select CS 3 CS RX 14 TX UART TX Serial Clock SCK 4 SCK TX 13 RX UART RX SPI Data Out SDO 5 MISO SCL 12 NC SPI Data In SDI 6 MOSI SDA 11 NC Power Supply 3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR - Power LED Indicator


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Click Board, MikroE, Mipot, Sub-1GHz, Wireless


## Price range: 41.3 - 41.3 GBP


## Link: https://thedebugstore.com/products/mikroe-3692-m-bus-rf-4-click-board-uk


## Compare-at price range: 59.0 - 59.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Mipot IoT Device Support: Debug Store's Development Boards and Tools](https://thedebugstore.com/a/llms/collections/devices-mipot)
- [Wireless Interface Click Boards™](https://thedebugstore.com/a/llms/collections/wireless-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Sub-1GHz Transceiver Click Boards™](https://thedebugstore.com/a/llms/collections/sub-1ghz-transceiver-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-3692, Available: yes, Inventory: 1


## Metafields 

- full_description: <p>Considering that wireless M-Bus is designed to be a robust, power efficient, long range wireless communication solution that operates in the license-free ISM bands that makes him one of the most ideal industrial protocols.</p>

<h3>How Does The M-BUS RF 4 Click Board™ Work?</h3>

<p>The <em><strong>M-BUS RF 4 Click Board™</strong></em> is a mikroBUS™ add-on board with a 32001324 – 868MHz band TRX module from Mipot. The radio operates at the unlicensed 868 MHz SRD frequency band and has specified serial data rates of up to 115.2 Kbps. This M-BUS RF 4 click is ideal for developing various applications, mainly solutions for water or gas, as well as heat and electricity metering applications, and even on meter and concentrator devices. The module supports various operating modes (S, T, R, C) to meet the requirements of one-way and two-way data communication, in stationary and mobile systems. The embedded stack implemented according to EN13757-4 Standard provides the physical access to the Wireless M-Bus communication.</p>

<p><img alt="" data-entity-type="" data-entity-uuid="" src="https://www.mikroe.com/img/images/m-bus-rf-4-click-inner-img.jpg" /></p>

<p>At startup time, the Module reads INTERFACE_SELECTION input pin state, which is routed to the PWM pin (marked SEL on Click board) of the mikroBUS™ socket. This pin should be left unconnected or set to high state to select the UART interface or set to low state to select the SPI interface for communicating with the main MCU. Widely used SPI and UART interfaces allow integration flexibility and easy development of customer products. The module meets all the requirements in the industrial temperature range -40/+85°C. Besides that, the module is also certified according to R&TTED 1999/05/EC and is compliant with the ReACH And ROHS directives.</p>

<p>The embedded stack implemented in the module according to EN13757-4 Standard provides the physical access to the Wireless M-Bus communication. M-BUS RF 4 click communicates with the target MCU through the mikroBUS™ UART or SPI interface, with additional functionality provided by IND, SEL, and RTS CS/CTS pins.</p>

<p>The <strong>M-BUS RF 4 Click Board™</strong> is designed to be operated only with 3.3V logic level. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V.</p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>Sub-1 GHz Transceievers</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>The <strong>M-BUS RF 4 Click Board™</strong> is designed for gas and water meter, heat or electricity applications</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>MIPOT 32001324 RF wireless transceiver</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>Data rates: 115.2 Kbps serial</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>SPI,UART</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>M (42.9 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V</td>
        </tr>
    </tbody>
</table>

<h3>PINOUT DIAGRAM</h3>

<p>This table shows how the pinout on the <strong>M-BUS RF 4 Click Board™</strong> corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table width="549">
    <tbody>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" data-entity-type="" data-entity-uuid="" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
        <tr>
            <td>Data Indicate</td>
            <td><strong>IND</strong></td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td><strong>SEL</strong></td>
            <td>Communication Selection In</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td><b>RTS</b></td>
            <td>UART RTS</td>
        </tr>
        <tr>
            <td>Chip Select</td>
            <td><b>CS</b></td>
            <td>3</td>
            <td>CS</td>
            <td>RX</td>
            <td>14</td>
            <td><strong>TX</strong></td>
            <td>UART TX</td>
        </tr>
        <tr>
            <td>Serial Clock</td>
            <td><strong>SCK</strong></td>
            <td>4</td>
            <td>SCK</td>
            <td>TX</td>
            <td>13</td>
            <td><strong>RX</strong></td>
            <td>UART RX</td>
        </tr>
        <tr>
            <td>SPI Data Out</td>
            <td><strong>SDO</strong></td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>SPI Data In</td>
            <td><strong>SDI</strong></td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Power Supply</td>
            <td><strong>3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>ONBOARD SETTINGS AND INDICATORS</h3>

<table>
    <tbody>
        <tr>
            <th>Label</th>
            <th>Name</th>
            <th>Default</th>
            <th>Description</th>
        </tr>
        <tr>
            <td>LD1</td>
            <td>PWR</td>
            <td>-</td>
            <td>Power LED Indicator</td>
        </tr>
    </tbody>
</table>

<h3> </h3>

- description_tag: The M-BUS RF 4 Click Board™ is a mikroBUS™ add-on board with a MIPOT 32001324 RF wireless transceiver. This module operates in the 868 MHz SRD Band. Available from Debug Store UK.
- title_tag: MikroE M-Bus RF 4 Click Board™ (MIKROE-3692)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: M-Bus RF 4 Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 30.8
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 34.804
- amazon_fr_currency: EUR
- amazon_fr_price: 34.804
- amazon_es_currency: EUR
- amazon_es_price: 34.804
- amazon_nl_currency: EUR
- amazon_nl_price: 34.804
- amazon_it_currency: EUR
- amazon_it_price: 34.804
- amazon_se_curency: SEK
- amazon_se_price: 351.12
- amazon_product_id: 8606018716630
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The M-BUS RF 4 Click Board™ is a mikroBUS™ add-on board with a MIPOT 32001324 RF wireless transceiver. This module operates in the 868 MHz SRD Band. Thanks to its small LCC form factor (15 x 25 mm only) and its low power consumption this module allows the implementation of highly integrated low power (battery operated) solutions for water, gas, heat or electricity metering applications, both on meter or concentrator devices.The M-BUS RF 4 Click Board™ is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.
- amazon_long_description: <p>M-BUS RF 4 Click Board™</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-m-bus-rf-4-click-3692-front_1.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-m-bus-rf-4-click-3692-back_1.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-m-bus-rf-4-click-3692-fusion_1.jpg
- amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-m-bus-rf-4-click-3692-fusion_1.jpg
- amazon_browse_node: 428655031
- mpn: MIKROE-3692
- backorder_label: If no stock shown above, check availability
- google_product_category: 2082
- condition: new
- custom_product: false
- mpn: MIKROE-3692
- google_product_category: Electronics
- custom_label_0: Click Board
- examples: 

<p>We provide a library for the <strong>M-BUS RF 4 Click Board™</strong> on our LibStock page, as well as a demo application (example), developed using MikroElektronika compilers. The demo can run on all the main MikroElektronika development boards.</p>

<h3>Library Description</h3>

<p>The library provides the functions of sending commands and receiving data using UART communication. For additional commands and their form - and the number of parameters to be sent, look at the datasheet.</p>

<h4>Key Functions</h4>

<ul>
	<li><code>void mbusrf4_sendCommand( uint8_t command, uint8_t length, uint8_t *payloadBuff)</code> - Send command - UART communication</li>
	<li><code>void mbusrf4_setCommunicationMode(uint8_t mode)</code> - Set communication SPI/UART</li>
</ul>

<h3>Example Description</h3>

<p>The application is composed of three sections :</p>

<ul>
	<li>System Initialization - Initializes UART Module and sets all the necessary GPIO pins</li>
	<li>Application Initialization - Initializes driver init, reads basic information and checks communication</li>
	<li>Application Task - In the RX mode it is waiting to receive data from another module... - In the TX mode sends the data packet....</li>
	<li>The interrupt routine must be adapted to each separate board MCU card</li>
	<li>it serves to receive all the data that arrives on the module
	<pre>
void applicationTask()
{
    /* RX App mode */
    if(fDataResp == 1 &amp;&amp; _appMode == _MBUSRF4_USER_APP_RX_MODE)
    {
       mikrobus_logWrite ( " ----- NEW - RX DATA ---- ", _LOG_LINE );
       _display_rxBuffer( 20 );
       mikrobus_logWrite ( " ------------------------ ", _LOG_LINE );
       fDataResp = 0;
    }
    
    /* TX App Mode */
    if(_appMode == _MBUSRF4_USER_APP_TX_MODE)
    {
        mbusrf4_sendCommand( _MBUSRF4_CMD_TX_MSG, 18, &amp;txBuffer[0] );
        mikrobus_logWrite ( " --- SEND - TX BUFFER --- ", _LOG_LINE );
        _display_rxBuffer( 5 );
        mikrobus_logWrite ( " ------------------------ ", _LOG_LINE );
        
        Delay_ms( 1500 );
    }
}
</pre>
	Additional Functions :</li>
</ul>

<ul>
	<li>void _display_rxBuffer(uint8_t nBytes) - logs the received data</li>
	<li>UART Interrupt functions</li>
</ul>

<p>The full application code, and ready to use projects can be found on our LibStock page.</p>

<p>Other mikroE Libraries used in the example:</p>

<ul>
	<li>UART</li>
	<li>Conversions</li>
	<li>String</li>
</ul>

<h3>Additional Notes and Information</h3>

<p>Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.</p>

<h3>MIKROSDK</h3>

<p>The <strong>M-BUS RF 4 Click Board™</strong> is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant Click board™ demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.</p>

- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/5a1da71cef04--m-bus-rf-4-click-schematic-1-cbe584.pdf?v=1649850258\">M-Bus RF 4 Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/5a1da71cef04--32001324-datasheet-1-8a124a.pdf?v=1649850300\">MIPOT 32001324 Wireless Transceiver Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- device_vendor: Mipot
- device_type: 32001324
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-09T06:05:10Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- target_keyword: M-Bus RF 4 Click Board
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241546166461"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Considering that wireless M-Bus is designed to be a robust, power efficient, long range wireless communication solution that operates in the license-free ISM bands that makes him one of the most ideal industrial protocols."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The M-BUS RF 4 Click Board™ Work?"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"M-BUS RF 4 Click Board™","bold":true,"italic":true},{"type":"text","value":" is a mikroBUS™ add-on board with a 32001324 – 868MHz band TRX module from Mipot. The radio operates at the unlicensed 868 MHz SRD frequency band and has specified serial data rates of up to 115.2 Kbps. This M-BUS RF 4 click is ideal for developing various applications, mainly solutions for water or gas, as well as heat and electricity metering applications, and even on meter and concentrator devices. The module supports various operating modes (S, T, R, C) to meet the requirements of one-way and two-way data communication, in stationary and mobile systems. The embedded stack implemented according to EN13757-4 Standard provides the physical access to the Wireless M-Bus communication."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"At startup time, the Module reads INTERFACE_SELECTION input pin state, which is routed to the PWM pin (marked SEL on Click board) of the mikroBUS™ socket. This pin should be left unconnected or set to high state to select the UART interface or set to low state to select the SPI interface for communicating with the main MCU. Widely used SPI and UART interfaces allow integration flexibility and easy development of customer products. The module meets all the requirements in the industrial temperature range -40/+85°C. Besides that, the module is also certified according to R&TTED 1999/05/EC and is compliant with the ReACH And ROHS directives."}]},{"type":"paragraph","children":[{"type":"text","value":"The embedded stack implemented in the module according to EN13757-4 Standard provides the physical access to the Wireless M-Bus communication. M-BUS RF 4 click communicates with the target MCU through the mikroBUS™ UART or SPI interface, with additional functionality provided by IND, SEL, and RTS CS/CTS pins."}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"M-BUS RF 4 Click Board™","bold":true},{"type":"text","value":" is designed to be operated only with 3.3V logic level. A proper logic voltage level conversion should be performed before the Click board™ is used with MCUs with logic levels of 5V."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nSub-1 GHz Transceievers\nApplications\nThe M-BUS RF 4 Click Board™ is designed for gas and water meter, heat or electricity applications\nOn-board modules\nMIPOT 32001324 RF wireless transceiver\nKey Features\nData rates: 115.2 Kbps serial\nInterface\nSPI,UART\nCompatibility\nmikroBUS\nClick board size\nM (42.9 x 25.4 mm)\nInput Voltage\n3.3V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout on the "},{"type":"text","value":"M-BUS RF 4 Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nData Indicate\nIND\n1\nAN\nPWM\n16\nSEL\nCommunication Selection In\nNC\n2\nRST\nINT\n15\nRTS\nUART RTS\nChip Select\nCS\n3\nCS\nRX\n14\nTX\nUART TX\nSerial Clock\nSCK\n4\nSCK\nTX\n13\nRX\nUART RX\nSPI Data Out\nSDO\n5\nMISO\nSCL\n12\nNC\nSPI Data In\nSDI\n6\nMOSI\nSDA\n11\nNC\nPower Supply\n3.3V\n7\n3.3V\n5V\n10\nNC\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ONBOARD SETTINGS AND INDICATORS"}]},{"type":"paragraph","children":[{"type":"text","value":"Label\nName\nDefault\nDescription\nLD1\nPWR\n-\nPower LED Indicator"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]}]}
- summary: <p>The <em><strong>M-BUS RF 4 Click Board™</strong></em> is a mikroBUS™ add-on board with a MIPOT 32001324 RF wireless transceiver. This module operates in the 868 MHz SRD Band. Thanks to its small LCC form factor (15 x 25 mm only) and its low power consumption this module allows the implementation of highly integrated low power (battery operated) solutions for water, gas, heat or electricity metering applications, both on meter or concentrator devices.</p>
<p>The <strong>M-BUS RF 4 Click Board™</strong> is supported by a mikroSDK compliant library, which includes functions that simplify software development. This Click Board™ comes as a fully tested product, ready to be used on a system equipped with the mikroBUS™ socket.</p>