# Title: MIC23099 Click Board™ ## Description: The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The MIC23099 Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: CS, INT. How Does The MIC23099 Click Board™ wORK? The MIC23099 Click Board™ has three screw terminals (Buck 1V, GND and Boost 3V3) which are outputs for connecting some external consumer. The low-battery level is indicated by an onboard STAT LED. Note: The MIC23099 is not a battery charger and it needs a battery to work properly. The battery is not included. MIC23099 FEATURES The MIC23099 is a high-efficiency, low-noise, dual output, integrated power management solution for single-cell alkaline or NiMH battery applications. To minimize switching artifacts in the audio band, both the converters are designed to operate with a minimum switching frequency of 80 kHz for the buck and 100 kHz for the boost. The high-current boost has a maximum switching frequency of 1 MHz, minimizing the solution footprint. The MIC23099 incorporates both battery management functions and fault protection. SPECIFICATIONS Type Boost Applications Voltage regulation for portable devices with AA or AAA batteries On-board modules MIC23099 - a high-efficiency, low-noise, dual output, integrated power management solution for single-cell alkaline or NiMH battery applications Key Features The low-battery level is indicated by an onboard STAT LED Interface GPIO Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout of the MIC23099 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC NC 2 RST INT 15 INT Power Good output pin Enable input pin EN 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground ## Product type: Click Board ## Vendor: Mikroelektronika d.o.o. ## Tags: Boost Converter, Click Board, MikroE, Power Management ## Price range: 24.5 - 24.5 GBP ## Link: https://thedebugstore.com/products/mikroe-2765-mic23099-click-board-uk ## Compare-at price range: 35.0 - 35.0 GBP ## Options - Title: Default Title ## Collections - [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store) - [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk) - [Power Management Click Boards™](https://thedebugstore.com/a/llms/collections/power-management-click-boards-catalogue) - [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk) - [Boost Converter Click Boards™](https://thedebugstore.com/a/llms/collections/boost-converter-click-boards-catalogue) - [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale) - [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale) - [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale) ## Variants - Default Title, SKU: MIKROE-2765, Available: yes, Inventory: 2 ## Metafields - description_tag: The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The Click Board™ is designed to run on a 3.3V power supply. Available from Debug Store UK. - title_tag: MikroE MIC23099 Click Board™ (MIKROE-2765) - manufacturer: Mikroelektronika d.o.o. - warranty: 12 months - amazon_enable: TRUE - amazon_title: MIC23099 Click Board - amazon_product_type: computercomponent - amazon_block: FALSE - amazon_prime_enable: FALSE - amazon_search: MikroElektronika Microelectronica MIKROE-1100 - amazon_uk_price: 25.52 - amazon_uk_currency: GBP - amazon_de_currency: EUR - amazon_de_price: 28.8376 - amazon_fr_currency: EUR - amazon_fr_price: 28.8376 - amazon_es_currency: EUR - amazon_es_price: 28.8376 - amazon_nl_currency: EUR - amazon_nl_price: 28.8376 - amazon_it_currency: EUR - amazon_it_price: 28.8376 - amazon_se_curency: SEK - amazon_se_price: 290.928 - amazon_product_id: 8606018711529 - amazon_product_id_type: EAN - amazon_update: Update - amazon_short_description: The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The Click Board™ is designed to run on a 3.3V power supply.It communicates with the target microcontroller over the following pins on the mikroBUS line: CS, INT. - amazon_long_description:

The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The Click is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS line: CS, INT.

How the Click Works

MIC23099 Click has three screw terminals (Buck 1V, GND and Boost 3V3) which are outputs for connecting some external consumer.The low-battery level is indicated by an on-board STAT LED.

MIC23099 Click Board™ - Battery Monitor.

NOTE: The MIC23099 is not a battery charger and it needs a battery to work properly. The battery is not included.

MIC23099 Features

The MIC23099 is a high-efficiency, low-noise, dual output, integrated power management solution for single-cell alkaline or NiMH battery applications.

To minimise switching artefacts in the audio band, both the converters are designed to operate with a minimum switching frequency of 80 kHz for the buck and 100 kHz for the boost. The high-current boost has a maximum switching frequency of 1 MHz, minimising the solution footprint.

The MIC23099 incorporates both battery management functions and fault protection.

- amazon_main_image: https://www.thedebugstore.com/images/product/lg-mic23099-click-front.jpg - amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-mic23099-click-angle.jpg - amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-mic23099-click-shuttle.jpg - amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-mic23099-click-back.jpg - amazon_other_image_4: https://www.thedebugstore.com/images/product/lg-mic23099-click-clicker.jpg - amazon_browse_node: 428655031 - mpn: MIKROE-2765 - backorder_label: If no stock shown above, check availability - google_product_category: 275 - condition: new - custom_product: false - mpn: MIKROE-2765 - google_product_category: Electronics - custom_label_0: Click Board - subtitle: Battery Power Supply Regulator - full_description:

The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The MIC23099 Click Board™ is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: CS, INT.

How Does The MIC23099 Click Board™ wORK?

The MIC23099 Click Board™ has three screw terminals (Buck 1V, GND and Boost 3V3) which are outputs for connecting some external consumer.
The low-battery level is indicated by an onboard STAT LED.



Note: The MIC23099 is not a battery charger and it needs a battery to work properly. The battery is not included.

MIC23099 FEATURES

The MIC23099 is a high-efficiency, low-noise, dual output, integrated power management solution for single-cell alkaline or NiMH battery applications. To minimize switching artifacts in the audio band, both the converters are designed to operate with a minimum switching frequency of 80 kHz for the buck and 100 kHz for the boost. The high-current boost has a maximum switching frequency of 1 MHz, minimizing the solution footprint. The MIC23099 incorporates both battery management functions and fault protection.

SPECIFICATIONS

Type Boost
Applications Voltage regulation for portable devices with AA or AAA batteries
On-board modules MIC23099 - a high-efficiency, low-noise, dual output, integrated power management solution for single-cell alkaline or NiMH battery applications
Key Features The low-battery level is indicated by an onboard STAT LED
Interface GPIO
Compatibility mikroBUS
Click board size L (57.15 x 25.4 mm)
Input Voltage 3.3V

PINOUT DIAGRAM

This table shows how the pinout of the MIC23099 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
NC 1 AN PWM 16 NC
NC 2 RST INT 15 INT Power Good output pin
Enable input pin EN 3 CS TX 14 NC
NC 4 SCK RX 13 NC
NC 5 MISO SCL 12 NC
NC 6 MOSI SDA 11 NC
Power supply +3.3V 7 3.3V 5V 10 NC
Ground GND 8 GND GND 9 GND Ground

 

- examples:

Code examples for the MIC23099 Click Board™, written for MikroElektronika hardware and compilers are available on Libstock.

CODE SNIPPET

The following code snippet sets the EN pin to high, to enable the operation of this click.

01 sbit MIC23099_EN_PIN at GPIOD_ODR.B13;
02 void systemInit()
03 {
04 GPIO_Digital_Output( &GPIOD_ODR, _GPIO_PINMASK_13 );
05 }
06
07 void MIC23099_Click_Init()
08 {
09 MIC23099_EN_PIN = 1;
10 }
11
12 void main()
13 {
14 systemInit();
15 MIC23099_Click_Init();
16 }
- attachments: [{"download_file":[{"download_file":"MIC23099 Click Board™ Schematic"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"Microchip MIC23099 Step-Up Regulator Datasheet"}],"download_filetype":[{"download_filetype":"pdf"}]}] - device_vendor: Microchip Technology - device_type: MIC23099YFT-T5 - warranty: 12 months - brand: MikroE - key_feature_1: Step-Up and Step-Down Regulator - manufacturer: Mikroelektronika d.o.o. - badge: - widget:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
- brands: gid://shopify/Metaobject/56256004319 - breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241545478333"] - customhs_code: 847330 - detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"MIC23099 Click Board™","bold":true,"italic":true},{"type":"text","value":" carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The "},{"type":"text","value":"MIC23099 Click Board™","bold":true},{"type":"text","value":" is designed to run on a 3.3V power supply. It communicates with the target microcontroller over the following pins on the mikroBUS™ line: CS, INT."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The MIC23099 Click Board™ wORK?"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"MIC23099 Click Board™ ","bold":true},{"type":"text","value":"has three screw terminals (Buck 1V, GND and Boost 3V3) which are outputs for connecting some external consumer."},{"type":"text","value":""},{"type":"text","value":"The low-battery level is indicated by an onboard STAT LED."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":"Note: The MIC23099 is not a battery charger and it needs a battery to work properly. The battery is not included."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"MIC23099 FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"The MIC23099 is a high-efficiency, low-noise, dual output, integrated power management solution for "},{"type":"text","value":"single-cell","bold":true},{"type":"text","value":" alkaline or NiMH battery applications. To minimize switching artifacts in the audio band, both the converters are designed to operate with a minimum switching frequency of 80 kHz for the buck and 100 kHz for the boost. The high-current boost has a maximum switching frequency of 1 MHz, minimizing the solution footprint. The MIC23099 incorporates both battery management functions and fault protection."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nBoost\nApplications\nVoltage regulation for portable devices with AA or AAA batteries\nOn-board modules\nMIC23099 - a high-efficiency, low-noise, dual output, integrated power management solution for single-cell alkaline or NiMH battery applications\nKey Features\nThe low-battery level is indicated by an onboard STAT LED\nInterface\nGPIO\nCompatibility\nmikroBUS\nClick board size\nL (57.15 x 25.4 mm)\nInput Voltage\n3.3V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"MIC23099 Click Board™","bold":true},{"type":"text","value":" ","bold":true},{"type":"text","value":"corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nNC\nNC\n2\nRST\nINT\n15\nINT\nPower Good output pin\nEnable input pin\nEN\n3\nCS\nTX\n14\nNC\nNC\n4\nSCK\nRX\n13\nNC\nNC\n5\nMISO\nSCL\n12\nNC\nNC\n6\nMOSI\nSDA\n11\nNC\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\nNC\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]}]} - summary:

The MIC23099 Click Board™ carries the MIC23099, a single AA/AAA cell step-down/step-up regulator with battery monitoring. The Click Board™ is designed to run on a 3.3V power supply.

It communicates with the target microcontroller over the following pins on the mikroBUS line: CS, INT.