# Title: 16x12 G Click Board™


## Description: The 16x12 G Click Board™ carries a 16x12 LED display and the IS31FL3733 matrix driver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, and the following pins on the mikroBUS™ line: INT, RST, CS. Each LED can be controlled individually – both for on/off control and light intensity. IS31FL3733 Driver Features The IS31FL3733 is a general purpose 12×16 LEDs matrix driver with 1/12 cycle rate. Each of the 192 LEDs can be dimmed individually with 8-bit PWM data, which allows 256 steps of linear dimming. The driver has selectable 3 Auto Breath Modes for each LED ( ABM-1, ABM-2, and ABM-3). SPECIFICATIONS Type LED Matrix Applications The 16x12 G Click Board™ brings serial 8x8 Yellow LED display matrix to your design On-board modules IS31FL3733 - a general purpose 12×16 LEDs matrix driver with 1/12 cycle rate, from Integrated Silicon Solution, Inc. Key Features 16 current source outputs for row control, 12 switch current inputs for column scan control, 1MHz I2C-compatible interface Interface GPIO,I2C Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of the 16x12 G Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC Reset RST 2 RST INT 15 INT Interrupt pin Standby SDB 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 SCL I2C clock NC 6 MOSI SDA 11 SDA I2C data Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground JUMPERS AND SETTINGS Designator Name Default Position Default Option Description JP1 PWR.SEL. Left 3V3 Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V JP2 ADDR. 1 Left 0 The last two bits of the I2C address JP2 ADDR. 2 Left 0 The last two bits of the I2C address


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Click Board, Display, Display Interface, ISSI, LED Array, LED Matrix, MikroE


## Price range: 25.2 - 25.2 GBP


## Link: https://thedebugstore.com/products/mikroe-2758-16x12-g-click-board-uk


## Compare-at price range: 36.0 - 36.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Integrated Silicon Solution Inc. (ISSI) Device Support - Debug Store](https://thedebugstore.com/a/llms/collections/integrated-silicon-solutions-device-support)
- [Display & Interface Click Boards™](https://thedebugstore.com/a/llms/collections/display-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [LED Array Displays](https://thedebugstore.com/a/llms/collections/led-array-catalogue)
- [Displays](https://thedebugstore.com/a/llms/collections/displays-catalogue-uk)
- [Boards](https://thedebugstore.com/a/llms/collections/circuit-boards-catalogue)
- [LED Matrix Click Boards™](https://thedebugstore.com/a/llms/collections/led-matrix-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-2758, Available: yes, Inventory: 2


## Metafields 

- full_description: <p>The <em><strong>16x12 G Click Board™</strong></em> carries a 16x12 LED display and the IS31FL3733 matrix driver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, and the following pins on the mikroBUS™ line: INT, RST, CS.</p>

<p>Each LED can be controlled individually – both for on/off control and light intensity.</p>

<h3>IS31FL3733 Driver Features</h3>

<p><img alt="" data-entity-type="" data-entity-uuid="" src="https://shop.mikroe.com/img/cms/16x12-g-click-inside-image.jpg" width="100%" /><br />
The IS31FL3733 is a general purpose 12×16 LEDs matrix driver with 1/12 cycle rate.</p>

<p>Each of the 192 LEDs can be dimmed individually with 8-bit PWM data, which allows 256 steps of linear dimming.</p>

<p>The driver has selectable 3 Auto Breath Modes for each LED ( ABM-1, ABM-2, and ABM-3).</p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>LED Matrix</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>The <strong>16x12 G Click Board™</strong> brings serial 8x8 Yellow LED display matrix to your design</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>IS31FL3733 - a general purpose 12×16 LEDs matrix driver with 1/12 cycle rate, from Integrated Silicon Solution, Inc.</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>16 current source outputs for row control, 12 switch current inputs for column scan control, 1MHz I2C-compatible interface</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>GPIO,I2C</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>L (57.15 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<h3>PINOUT DIAGRAM</h3>

<p>This table shows how the pinout of the <strong>16x12 G Click Board™</strong><strong> </strong>corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table>
    <tbody>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" data-entity-type="" data-entity-uuid="" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
        <tr>
            <td>NC</td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Reset</td>
            <td><strong>RST</strong></td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td><strong>INT</strong></td>
            <td>Interrupt pin</td>
        </tr>
        <tr>
            <td>Standby</td>
            <td><strong>SDB</strong></td>
            <td>3</td>
            <td>CS</td>
            <td>TX</td>
            <td>14</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>4</td>
            <td>SCK</td>
            <td>RX</td>
            <td>13</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td><strong>SCL</strong></td>
            <td>I2C clock</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td><strong>SDA</strong></td>
            <td>I2C data</td>
        </tr>
        <tr>
            <td>Power supply</td>
            <td><strong>+3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td><strong>+5V</strong></td>
            <td>Power supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>JUMPERS AND SETTINGS</h3>

<table>
    <tbody>
        <tr>
            <th>Designator</th>
            <th>Name</th>
            <th>Default Position</th>
            <th>Default Option</th>
            <th>Description</th>
        </tr>
        <tr>
            <td>JP1</td>
            <td>PWR.SEL.</td>
            <td>Left</td>
            <td>3V3</td>
            <td>Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V</td>
        </tr>
        <tr>
            <td>JP2</td>
            <td>ADDR. 1</td>
            <td>Left</td>
            <td>0</td>
            <td>The last two bits of the I2C address</td>
        </tr>
        <tr>
            <td>JP2</td>
            <td>ADDR. 2</td>
            <td>Left</td>
            <td>0</td>
            <td>The last two bits of the I2C address</td>
        </tr>
    </tbody>
</table>

<h3> </h3>

<section id="info-description"> </section>

- description_tag: Discover the 16x12 G Click Board, featuring a 16x12 LED display and IS31FL3733 matrix driver. Perfect for 3.3V or 5V power supply. Communicates via I2C interface.
- title_tag: MikroE 16x12 G Click Board™ (MIKROE-2758)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: 16x12 G Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 26.4
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 29.832
- amazon_fr_currency: EUR
- amazon_fr_price: 29.832
- amazon_es_currency: EUR
- amazon_es_price: 29.832
- amazon_nl_currency: EUR
- amazon_nl_price: 29.832
- amazon_it_currency: EUR
- amazon_it_price: 29.832
- amazon_se_curency: SEK
- amazon_se_price: 300.96
- amazon_product_id: 5055383610556
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The 16x12 G Click Board™ carries a 16x12 LED display and the IS31FL3733 matrix driver. The Click Board™ is designed to run on either 3.3V or 5V power supply.It communicates with the target microcontroller over I2C interface, and the following pins on the MikroBUS line: INT, RST, CS. .
- amazon_long_description: <p>The <strong>16x12 G Click Board™</strong> includes a 16x12 LED display and the IS31FL3733 matrix driver. The Click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, and the following pins on the mikroBUS line: INT, RST, CS.</p><p>Each LED can be controlled individually  both for on/off control and light intensity.</p><h2>IS31FL3733 Driver Features</h2><p><img src="//www.thedebugstore.com/uploads/Images/16x12-g-Click-board.jpg" style="display:block;margin:auto;" alt="16x12 G Click Board™" />.</p><p>The IS31FL3733 is a general purpose 12 x 16 LEDs matrix driver with 1/12 cycle rate.</p><p>Each of the 192 LEDs can be dimmed individually with 8-bit PWM data, which allows 256 steps of linear dimming.<br />The driver has selectable 3 Auto Breath Modes for each LED ( ABM-1, ABM-2, and ABM-3).</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-16x12-g-front_1.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-16x12-g-back_1.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-16x12-g-click_1.jpg
- amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-16x12-g-click_1.jpg
- amazon_browse_node: 428655031
- related_products: MIKROE-1881,MIKROE-2520,MIKROE-4336,MIKROE-2659,MIKROE-2734,MIKROE-1438,MIKROE-1988
- mpn: MIKROE-2758
- backorder_label: If no stock shown above, check availability
- condition: new
- google_product_category: 2082
- condition: new
- custom_product: false
- mpn: MIKROE-2758
- google_product_category: Electronics
- custom_label_0: Click Board
- examples: 

<p>Code examples for the <strong>16x12 G Click Board™</strong>, written for MikroElektronika hardware and compilers are available on Libstock.</p>

<h4>CODE SNIPPET</h4>

<p>The following code snippet shows the default initialization procedure for the <strong>16x12 G Click Board™</strong>.</p>

<section id="info-description">
<pre>
01 IS31FL3733_init( &amp;instance, _IS31FL3733_GND_ADDR, _IS31FL3733_GND_ADDR,
02                      I2C2_Start, I2C2_Stop, I2C2_Write, I2C2_Read );
03     IS31FL3733_setGCC( &amp;instance, 64 );
04     // PWM control mode (default)
05     for( i = 0; i &lt; _IS31FL3733_CS; ++i )
06     {
07         // Set PWM values for all LEDs at i-th row to 55/255 level.
08         IS31FL3733_setLEDPWM ( &amp;instance, i, _IS31FL3733_SW, 55 );
09         // Turn on selected LEDs.
10         IS31FL3733_setLEDState ( &amp;instance, i, _IS31FL3733_SW,
11                                  _IS31FL3733_LED_STATE_ON );
12     }
13     // Clear the matrix
14     IS31FL3733_clearMatrix( &amp;instance );</pre>
</section>

- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/667a09fd152a--16x12-g-click-schematic-1-fa099b.pdf?v=1650798868\">16x12 G Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/667a09fd152a--31FL3733-1-31e0ee.pdf?v=1650798905\">ISSI 31FL3733 LED Matrix Driver Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- device_vendor: ISSI, Integrated Silicon Solution Inc
- device_type: IS31FL3733-QFLS4-TR
- warranty: 12 months
- brand: MikroE
- original_description: <p>The <em><strong>16x12 G Click Board™</strong></em> carries a 16x12 LED display and the IS31FL3733 matrix driver. The Click Board™ is designed to run on either a 3.3V or 5V power supply.</p>
<p><span data-mce-fragment="1">The </span><strong data-mce-fragment="1">16x12 G Click Board™</strong> communicates with the target microcontroller over the I2C interface, and the following pins on the MikroBUS line: INT, RST, CS..</p>
- target_keyword: 16x12 G Click Board
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-10T13:29:49Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241544822973"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"16x12 G Click Board™","bold":true,"italic":true},{"type":"text","value":" carries a 16x12 LED display and the IS31FL3733 matrix driver. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over I2C interface, and the following pins on the mikroBUS™ line: INT, RST, CS."}]},{"type":"paragraph","children":[{"type":"text","value":"Each LED can be controlled individually – both for on/off control and light intensity."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"IS31FL3733 Driver Features"}]},{"type":"paragraph","children":[{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":"The IS31FL3733 is a general purpose 12×16 LEDs matrix driver with 1/12 cycle rate."}]},{"type":"paragraph","children":[{"type":"text","value":"Each of the 192 LEDs can be dimmed individually with 8-bit PWM data, which allows 256 steps of linear dimming."}]},{"type":"paragraph","children":[{"type":"text","value":"The driver has selectable 3 Auto Breath Modes for each LED ( ABM-1, ABM-2, and ABM-3)."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nLED Matrix\nApplications\nThe 16x12 G Click Board™ brings serial 8x8 Yellow LED display matrix to your design\nOn-board modules\nIS31FL3733 - a general purpose 12×16 LEDs matrix driver with 1/12 cycle rate, from Integrated Silicon Solution, Inc.\nKey Features\n16 current source outputs for row control, 12 switch current inputs for column scan control, 1MHz I2C-compatible interface\nInterface\nGPIO,I2C\nCompatibility\nmikroBUS\nClick board size\nL (57.15 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"16x12 G Click Board™","bold":true},{"type":"text","value":" ","bold":true},{"type":"text","value":"corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nNC\nReset\nRST\n2\nRST\nINT\n15\nINT\nInterrupt pin\nStandby\nSDB\n3\nCS\nTX\n14\nNC\nNC\n4\nSCK\nRX\n13\nNC\nNC\n5\nMISO\nSCL\n12\nSCL\nI2C clock\nNC\n6\nMOSI\nSDA\n11\nSDA\nI2C data\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"JUMPERS AND SETTINGS"}]},{"type":"paragraph","children":[{"type":"text","value":"Designator\nName\nDefault Position\nDefault Option\nDescription\nJP1\nPWR.SEL.\nLeft\n3V3\nPower Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V\nJP2\nADDR. 1\nLeft\n0\nThe last two bits of the I2C address\nJP2\nADDR. 2\nLeft\n0\nThe last two bits of the I2C address"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]},{"type":"paragraph","children":[{"type":"text","value":" "}]}]}
- summary: <p>Introducing the 16x12 G Click Board, a versatile and dynamic addition to your electronics projects. This innovative Click Board™ features a 16x12 LED display coupled with the powerful IS31FL3733 matrix driver, offering you a wide range of creative possibilities.</p>
<p>One of the key features of the 16x12 G Click Board is its flexibility in power supply options. Whether you are working with a 3.3V or 5V power source, this Click Board™ is ready to deliver top-notch performance.</p>
<p>Designed for seamless integration, the 16x12 G Click Board communicates effortlessly with your target microcontroller through the I2C interface and specific pins on the MikroBUS line, including INT, RST, and CS.</p>
<p>Enhance your projects with the vibrant visual capabilities of the 16x12 G Click Board. Whether you are creating eye-catching displays or implementing innovative visual feedback systems, this Click Board™ is sure to impress with its clarity and precision.</p>
<p>Unleash your creativity and bring your ideas to life with the 16x12 G Click Board. Whether you are a seasoned electronics enthusiast or a beginner looking to explore the world of LED displays, this Click Board™ offers a user-friendly experience that is both engaging and rewarding.</p>
<p>Experience the convenience and power of the 16x12 G Click Board today. Elevate your projects with superior visual displays and seamless integration, all in one compact and reliable package.</p>