# Title: USB UART 2 Click Board™
## Description: The USB UART 2 Click Board™ provides USB isolation and carries the ADUM4160 USB port isolator, from Analog Devices. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the mikroBUS™ line: RST, CS, PWM, INT. Use the USB UART 2 Click Board™ for isolating USB communication, and preventing voltage spikes from destroying sensitive equipment. ADUM4160BRWZ FEATURES ADUM4160BRWZ is a USB port isolator, based on Analog Devices, Inc., iCoupler® technology. Combining high-speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics and are easily integrated with low and full speed USB-compatible peripheral devices. The ADUM4160BRWZ uses the edge detection based iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator. Isolating an upstream facing port provides several advantages in simplicity, power management, and robust operation. How Does The USB UART 2 Click Board™ Work? The USB UART 2 Click Board™ takes power both from the development system and from the USB, so both sides of the isolator can function. The FT232RL chip on board to act as a USB-UART converter. SPECIFICATIONS Type Isolators,USB Applications USB peripheral isolation, isolated USB hub, etc. On-board modules ADUM4160BRWZ USB port isolator, FT232 IC Key Features iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator Interface GPIO,UART,USB Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout on the USB UART 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 CBUS3 Factory PWR EN Clear to send CTS 2 RST INT 15 RTS Request to send Factory Sleep CBUS4 3 CS TX 14 TXD UART transmit data NC 4 SCK RX 13 RXD UART receive data NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground JUMPERS AND SETTINGS Designator Name Default Position Default Option Description JP1 PWR.SEL. Left 3V3 Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V LEDS AND BUTTONS Designator Name Type Description TX LED Shows UART TX activity RX LED Shows UART RX activity
## Product type: Click Board
## Vendor: Mikroelektronika d.o.o.
## Tags: Analog Devices, Click Board, interface, MikroE, Serial Interface, UART, USB, USB Interface
## Price range: 32.9 - 32.9 GBP
## Link: https://thedebugstore.com/products/mikroe-2674-usb-uart-2-click-board-uk
## Compare-at price range: 47.0 - 47.0 GBP
## Options
- Title: Default Title
## Collections
- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Analog Devices Development Boards and Support Tools | Debug Store](https://thedebugstore.com/a/llms/collections/analog-devices-device-support-uk)
- [Serial Interface Click Boards™](https://thedebugstore.com/a/llms/collections/serial-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Interface Click Boards™](https://thedebugstore.com/a/llms/collections/interface-click-boards-catalogue)
- [USB Click Boards™](https://thedebugstore.com/a/llms/collections/usb-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)
## Variants
- Default Title, SKU: MIKROE-2674, Available: yes, Inventory: 3
## Metafields
- full_description: The USB UART 2 Click Board™ provides USB isolation and carries the ADUM4160 USB port isolator, from Analog Devices. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the mikroBUS™ line: RST, CS, PWM, INT.
Use the USB UART 2 Click Board™ for isolating USB communication, and preventing voltage spikes from destroying sensitive equipment.
ADUM4160BRWZ FEATURES
ADUM4160BRWZ is a USB port isolator, based on Analog Devices, Inc., iCoupler® technology. Combining high-speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics and are easily integrated with low and full speed USB-compatible peripheral devices.
The ADUM4160BRWZ uses the edge detection based iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator. Isolating an upstream facing port provides several advantages in simplicity, power management, and robust operation.
How Does The USB UART 2 Click Board™ Work?
The USB UART 2 Click Board™ takes power both from the development system and from the USB, so both sides of the isolator can function.
The FT232RL chip on board to act as a USB-UART converter.
SPECIFICATIONS
| Type |
Isolators,USB |
| Applications |
USB peripheral isolation, isolated USB hub, etc. |
| On-board modules |
ADUM4160BRWZ USB port isolator, FT232 IC |
| Key Features |
iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator |
| Interface |
GPIO,UART,USB |
| Compatibility |
mikroBUS |
| Click board size |
M (42.9 x 25.4 mm) |
| Input Voltage |
3.3V or 5V |
PINOUT DIAGRAM
This table shows how the pinout on the USB UART 2 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).
| Notes |
Pin |
 |
Pin |
Notes |
| NC |
1 |
AN |
PWM |
16 |
CBUS3 |
Factory PWR EN |
| Clear to send |
CTS |
2 |
RST |
INT |
15 |
RTS |
Request to send |
| Factory Sleep |
CBUS4 |
3 |
CS |
TX |
14 |
TXD |
UART transmit data |
| NC |
4 |
SCK |
RX |
13 |
RXD |
UART receive data |
| NC |
5 |
MISO |
SCL |
12 |
NC |
| NC |
6 |
MOSI |
SDA |
11 |
NC |
| Power supply |
+3.3V |
7 |
3.3V |
5V |
10 |
+5V |
Power supply |
| Ground |
GND |
8 |
GND |
GND |
9 |
GND |
Ground |
JUMPERS AND SETTINGS
| Designator |
Name |
Default Position |
Default Option |
Description |
| JP1 |
PWR.SEL. |
Left |
3V3 |
Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V |
LEDS AND BUTTONS
| Designator |
Name |
Type |
Description |
| TX |
LED |
Shows UART TX activity |
| RX |
LED |
Shows UART RX activity |
- description_tag: The USB UART 2 Click Board™ provides USB isolation and carries the ADUM4160BRWZ USB port isolator. It used the FT232RL USB to UART Interface from FDTI. Available from Debug Store UK.
- title_tag: MikroE USB UART 2 Click Board™ (MIKROE-2674)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: USB UART 2 Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 34.32
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 38.7816
- amazon_fr_currency: EUR
- amazon_fr_price: 38.7816
- amazon_es_currency: EUR
- amazon_es_price: 38.7816
- amazon_nl_currency: EUR
- amazon_nl_price: 38.7816
- amazon_it_currency: EUR
- amazon_it_price: 38.7816
- amazon_se_curency: SEK
- amazon_se_price: 391.248
- amazon_product_id: 8606018710799
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The USB UART 2 Click Board™ provides USB isolation and carries the ADUM4160BRWZ USB port isolator.The Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the MikroBUS line: RST, CS, PWM, INT.
- amazon_long_description: The USB UART 2 Click Board™ provides USB isolation and carries the ADUM4160BRWZ USB port isolator. The Click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the mikroBUS line: RST, CS, PWM, INT.
Use the USB UART 2 Click for isolating USB communication, and preventing voltage spikes from destroying sensitive equipment.
.
ADUM4160BRWZ Features
ADUM4160BRWZ is a USB port isolator, based on Analog Devices, Inc, iCoupler' technology. Combining high-speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics and are easily integrated with low and full speed USB-compatible peripheral devices.
The ADUM4160BRWZ uses the edge detection based iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator. Isolating an upstream facing port provides several advantages in simplicity, power management, and robust operation.
How the Click Works
The Click takes power both from the development system and from the USB, so both sides of the isolator can function.
The FT232RL chip on board to act as a USB-UART converter.
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-usb-uart-2-click-board.jpg
- amazon_browse_node: 428655031
- related_products: MIKROE-549,MIKROE-3063,MIKROE-2810,MIKROE-1203
- mpn: MIKROE-2674
- backorder_label: If no stock shown above, check availability
- google_product_category: 2082
- attachments: [{"download_file":[{"download_file":"USB UART 2 Click Board™ Schematic"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"Analog Devices ADUM4160 Isolated USB to USB Interface Datasheet"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"FDTI FT232RL USB to UART Interface Datasheet"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- condition: new
- custom_product: false
- mpn: MIKROE-2674
- google_product_category: Electronics
- custom_label_0: Click Board
- device_vendor: Analog Devices Inc.
- device_type: ADUM4160BRWZ
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: No reviews
- widget:
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241546100925"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The"},{"type":"text","value":" USB UART 2 Click Board™","bold":true},{"type":"text","value":" provides USB isolation and carries the ADUM4160 USB port isolator, from Analog Devices. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface, with additional functionality provided the following pins on the mikroBUS™ line: RST, CS, PWM, INT."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":"Use the "},{"type":"text","value":"USB UART 2 Click Board™","bold":true},{"type":"text","value":" for isolating USB communication, and preventing voltage spikes from destroying sensitive equipment."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ADUM4160BRWZ FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"ADUM4160BRWZ is a USB port isolator, based on Analog Devices, Inc., iCoupler® technology. Combining high-speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics and are easily integrated with low and full speed USB-compatible peripheral devices."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":"The ADUM4160BRWZ uses the edge detection based iCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator. Isolating an upstream facing port provides several advantages in simplicity, power management, and robust operation. "}]},{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The USB UART 2 Click Board™ Work?"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"USB UART 2 Click Board™","bold":true},{"type":"text","value":" takes power both from the development system and from the USB, so both sides of the isolator can function."}]},{"type":"paragraph","children":[{"type":"text","value":"The FT232RL chip on board to act as a USB-UART converter."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nIsolators,USB\nApplications\nUSB peripheral isolation, isolated USB hub, etc.\nOn-board modules\nADUM4160BRWZ USB port isolator, FT232 IC\nKey Features\niCoupler technology in conjunction with internal logic to implement a transparent, easily configured, upstream facing port isolator\nInterface\nGPIO,UART,USB\nCompatibility\nmikroBUS\nClick board size\nM (42.9 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout on the "},{"type":"text","value":"USB UART 2 Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nCBUS3\nFactory PWR EN\nClear to send\nCTS\n2\nRST\nINT\n15\nRTS\nRequest to send\nFactory Sleep\nCBUS4\n3\nCS\nTX\n14\nTXD\nUART transmit data\nNC\n4\nSCK\nRX\n13\nRXD\nUART receive data\nNC\n5\nMISO\nSCL\n12\nNC\nNC\n6\nMOSI\nSDA\n11\nNC\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"JUMPERS AND SETTINGS"}]},{"type":"paragraph","children":[{"type":"text","value":"Designator\nName\nDefault Position\nDefault Option\nDescription\nJP1\nPWR.SEL.\nLeft\n3V3\nPower Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"LEDS AND BUTTONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Designator\nName\nType\nDescription\nTX\nLED\nShows UART TX activity\nRX\nLED\nShows UART RX activity"}]}]}
- summary: The USB UART 2 Click Board™ provides USB isolation and carries the ADUM4160BRWZ USB port isolator. It used the FT232RL USB to UART Interface from FDTI.
The USB UART 2 Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over the UART interface, with additional functionality provided the following pins on the MikroBUS line: RST, CS, PWM, INT.
.