# Title: CAN Isolator Click Board™


## Description: The CAN Isolator Click Board™ provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter, from Analog Devices. The click is designed to run on either 3.3V or 5V power supply. The CAN Isolator Click Board™ communicates with the target microcontroller over UART interface. The CAN Isolator Click Board™ carries a DB 9-pin male connector. ADM3053 FEATURES The ADM3053 is an isolated controller area network (CAN) physical layer transceiver with an integrated isolated DC-to-DC converter. The ADM3053 creates a fully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps. CONNECTOR FEATURES This is a standard DB 9-pin male connector. SPECIFICATIONS Type CAN,Isolators Applications CAN data buses, Industrial field networks On-board modules ADM3053 CAN transceiver, DB 9-pin connector Key Features fully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps Interface UART Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of the CAN Isolator Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 NC NC 2 RST INT 15 NC NC 3 CS TX 14 RXD Receiver Output Data NC 4 SCK RX 13 TXD Driver Input Data NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground JUMPERS AND SETTINGS Designator Name Default Position Default Option Description JP1 VIO.SEL. Left 3V3 Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V JP2 SLOPE SEL Left HI Slope select, default high rate, right option the slope is limited


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Analog Devices, CAN Bus, Click Board, Interface, MikroE, Serial Interface


## Price range: 32.9 - 32.9 GBP


## Link: https://thedebugstore.com/products/mikroe-2627-can-isolator-click-board-uk


## Compare-at price range: 47.0 - 47.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Analog Devices Development Boards and Support Tools | Debug Store](https://thedebugstore.com/a/llms/collections/analog-devices-device-support-uk)
- [Serial Interface Click Boards™](https://thedebugstore.com/a/llms/collections/serial-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Interface Click Boards™](https://thedebugstore.com/a/llms/collections/interface-click-boards-catalogue)
- [CAN Bus Click Boards™](https://thedebugstore.com/a/llms/collections/can-bus-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-2627, Available: yes, Inventory: 2


## Metafields 

- full_description: <p>The <em><strong>CAN Isolator Click Board™</strong></em> provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter, from Analog Devices. The click is designed to run on either 3.3V or 5V power supply. The <strong>CAN Isolator Click Board™</strong> communicates with the target microcontroller over UART interface.<br />
<br />
<img alt="CAN Isolator click" data-entity-type="" data-entity-uuid="" src="https://shop.mikroe.com/img/cms/can-isolator-click-inside-text-image.jpg" width="90%" /></p>

<p>The <strong>CAN Isolator Click Board™</strong> carries a DB 9-pin male connector.</p>

<h3>ADM3053 FEATURES</h3>

<p>The ADM3053 is an isolated controller area network (CAN) physical layer transceiver with an integrated isolated DC-to-DC converter.</p>

<p>The ADM3053 creates a fully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps.</p>

<h3>CONNECTOR FEATURES</h3>

<p>This is a standard <strong>DB 9-pin</strong> male connector.</p>

<p><img alt="CAN Isolator click" data-entity-type="" data-entity-uuid="" src="https://shop.mikroe.com/img/cms/can-isolator-inside-image.jpg" width="95%" /></p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>CAN,Isolators</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>CAN data buses, Industrial field networks</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>ADM3053 CAN transceiver, DB 9-pin connector</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>fully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>UART</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>L (57.15 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<h3>PINOUT DIAGRAM</h3>

<p>This table shows how the pinout of the <strong>CAN Isolator Click Board™</strong> corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table>
    <tbody>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" data-entity-type="" data-entity-uuid="" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
        <tr>
            <td>NC</td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>3</td>
            <td>CS</td>
            <td>TX</td>
            <td>14</td>
            <td><strong>RXD</strong></td>
            <td>Receiver Output Data</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>4</td>
            <td>SCK</td>
            <td>RX</td>
            <td>13</td>
            <td><strong>TXD</strong></td>
            <td>Driver Input Data</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Power supply</td>
            <td><strong>+3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td><strong>+5V</strong></td>
            <td>Power supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>JUMPERS AND SETTINGS</h3>

<table>
    <tbody>
        <tr>
            <th>Designator</th>
            <th>Name</th>
            <th>Default Position</th>
            <th>Default Option</th>
            <th>Description</th>
        </tr>
        <tr>
            <td>JP1</td>
            <td>VIO.SEL.</td>
            <td>Left</td>
            <td>3V3</td>
            <td>Power Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V</td>
        </tr>
        <tr>
            <td>JP2</td>
            <td>SLOPE SEL</td>
            <td>Left</td>
            <td>HI</td>
            <td>Slope select, default high rate, right option the slope is limited</td>
        </tr>
    </tbody>
</table>

<h3> </h3>

<section id="info-description"> </section>

- description_tag: The CAN Isolator Click Board™ provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter.

The CAN Isola Available from Debug Store UK.
- title_tag: MikroE CAN Isolator Click Board™ (MIKROE-2627)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: CAN Isolator Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 34.32
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 38.7816
- amazon_fr_currency: EUR
- amazon_fr_price: 38.7816
- amazon_es_currency: EUR
- amazon_es_price: 38.7816
- amazon_nl_currency: EUR
- amazon_nl_price: 38.7816
- amazon_it_currency: EUR
- amazon_it_price: 38.7816
- amazon_se_curency: SEK
- amazon_se_price: 391.248
- amazon_product_id: 8606018710485
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The CAN Isolator Click Board™ provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter.The Click Board™ is designed to run on either 3.3V or 5V power supply. CAN Isolator Click Board™ communicates with the target microcontroller over UART interface.
- amazon_long_description: <p>The CAN Isolator Click Board™ provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter.</p><p>The Click Board™ is designed to run on either 3.3V or 5V power supply. CAN Isolator Click Board™ communicates with the target microcontroller over UART interface.</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-can-isolator-click-front.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-can-isolator-click-front.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-can-isolator-click-front.jpg
- amazon_browse_node: 428655031
- related_products: TP360110,MIKROE-2379
- mpn: MIKROE-2627
- backorder_label: If no stock shown above, check availability
- google_product_category: 259
- condition: new
- custom_product: false
- mpn: MIKROE-2627
- google_product_category: Electronics
- custom_label_0: Click Board
- examples: 

<h4>CODE SNIPPET</h4>

<p>Example of CAN configuration - PIC32</p>

<section id="info-description">
<pre>
01 // set required baud rate and sampling rules
02 unsigned int can_config_flags;
03 CAN1SetOperationMode(_CAN_MODE_CONFIG,0xFF); 
04 can_config_flags = _CAN_CONFIG_SAMPLE_THRICE &amp;  
05                    _CAN_CONFIG_PHSEG2_PRG_ON &amp;
06                    _CAN_CONFIG_STD_MSG &amp;
07                    _CAN_CONFIG_MATCH_MSG_TYPE &amp;
08                    _CAN_CONFIG_LINE_FILTER_OFF;
09 CAN1SetBaudRate(1,3,3,3,1,can_config_flags);
10 CAN1ConfigureFIFO(_CAN_BUFFER_0, 8,_CAN_FIFO_RX &amp; _CAN_FULL_MESSAGE);
11 CAN1ConfigureFIFO(_CAN_BUFFER_1, 8,_CAN_FIFO_TX &amp; _CAN_TX_PRIORITY_3 &amp; _CAN_TX_NO_RTR_FRAME);
12 CAN1SetMask(_CAN_MASK_0, -1, _CAN_CONFIG_MATCH_MSG_TYPE &amp; _CAN_CONFIG_XTD_MSG);
13 CAN1SetFilter(_CAN_FILTER_31, ID_1st, _CAN_MASK_3, _CAN_BUFFER_0, _CAN_CONFIG_XTD_MSG);
14 CAN1FilterEnable(0x1111);</pre>
</section>

- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/093802e965df--can-isolator-click-schematic-1-f8f613.pdf?v=1650376391\">CAN Isolator Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/093802e965df--ADM3053-1-6c4d36.pdf?v=1650376430\">Analog Devices ADM3053 Isolated CAN Transceiver Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- device_vendor: Analog Devices Inc.
- device_type: ADM3053BRWZ
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-09T21:11:45Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241546100925"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"CAN Isolator Click Board™","bold":true,"italic":true},{"type":"text","value":" provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter, from Analog Devices. The click is designed to run on either 3.3V or 5V power supply. The "},{"type":"text","value":"CAN Isolator Click Board™","bold":true},{"type":"text","value":" communicates with the target microcontroller over UART interface."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"CAN Isolator Click Board™","bold":true},{"type":"text","value":" carries a DB 9-pin male connector."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ADM3053 FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"The ADM3053 is an isolated controller area network (CAN) physical layer transceiver with an integrated isolated DC-to-DC converter."}]},{"type":"paragraph","children":[{"type":"text","value":"The ADM3053 creates a fully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"CONNECTOR FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"This is a standard "},{"type":"text","value":"DB 9-pin","bold":true},{"type":"text","value":" male connector."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nCAN,Isolators\nApplications\nCAN data buses, Industrial field networks\nOn-board modules\nADM3053 CAN transceiver, DB 9-pin connector\nKey Features\nfully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps\nInterface\nUART\nCompatibility\nmikroBUS\nClick board size\nL (57.15 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"CAN Isolator Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nNC\nNC\n2\nRST\nINT\n15\nNC\nNC\n3\nCS\nTX\n14\nRXD\nReceiver Output Data\nNC\n4\nSCK\nRX\n13\nTXD\nDriver Input Data\nNC\n5\nMISO\nSCL\n12\nNC\nNC\n6\nMOSI\nSDA\n11\nNC\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"JUMPERS AND SETTINGS"}]},{"type":"paragraph","children":[{"type":"text","value":"Designator\nName\nDefault Position\nDefault Option\nDescription\nJP1\nVIO.SEL.\nLeft\n3V3\nPower Supply Voltage Selection 3V3/5V, left position 3V3, right position 5V\nJP2\nSLOPE SEL\nLeft\nHI\nSlope select, default high rate, right option the slope is limited"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]},{"type":"paragraph","children":[{"type":"text","value":" "}]}]}
- summary: <p>The <em><strong>CAN Isolator Click Board™</strong> </em>provides isolated CAN communication. It carries the ADM3053 signal and power isolated CAN transceiver with an integrated isolated DC-to-DC converter.</p>
<p>The <strong data-mce-fragment="1">CAN Isolator Click Board™</strong> is designed to run on either a 3.3V or 5V power supply. CAN Isolator Click Board™ communicates with the target microcontroller over UART interface.</p>