# Title: Spirit Click Board™


## Description: The SPIRIT Click Board™ carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, RST, CS. It can be used to wirelessly send and receive UART data. SP1ML 868MHZ RF MODULE FEATURES SP1ML is based on the SPIRIT1 RF sub-GHz transceiver (with integrated SMPS), STM32L1 microcontroller, integrated filter/balun, and chip antenna. There are two operational modes, command mode and operating mode. The command mode allows module configuration and status interrogation using an extended 'AT' style command set. In operating mode the module serves its primary purpose as a wireless transceiver. In operating mode the module uses only 13.5mA, 2.2mA in command mode, and even lower in standby with just 1.4µA. This kind of power consumption makes it ideal for smart devices that send small amounts of data. The module has an integrated antenna and crystal. SPECIFICATIONS Type Sub-1 GHz Transceivers Applications Security systems, mobile health and medicine applications, IoT, wireless metering, etc. On-board modules SP1ML 868MHz ultra low-power RF module Radio Region Europe Key Features Low data rate, low power sub-GHz transceiver Interface GPIO,UART Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of SPIRIT Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 SHDN Shutdown Reset input, active low RST 2 RST INT 15 NC Command mode CMD 3 CS TX 14 TXD UART transmit data NC 4 SCK RX 13 RXD UART receive data NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground JUMPERS AND SETTINGS LOGIC SEL - used to select 3.3 or 5V logical level for UART communication (J1A in the schematic).


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Click Board, MikroE, Sub-1GHz, Wireless


## Price range: 32.9 - 32.9 GBP


## Link: https://thedebugstore.com/products/mikroe-2568-spirit-click-board-uk


## Compare-at price range: 47.0 - 47.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Wireless Interface Click Boards™](https://thedebugstore.com/a/llms/collections/wireless-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Sub-1GHz Transceiver Click Boards™](https://thedebugstore.com/a/llms/collections/sub-1ghz-transceiver-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-2568, Available: yes, Inventory: 1


## Metafields 

- full_description: <p>The <strong>SPIRIT Click Board™</strong> carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, RST, CS.</p>

<p>It can be used to wirelessly send and receive UART data.</p>

<h3>SP1ML 868MHZ RF MODULE FEATURES</h3>

<p>SP1ML is based on the SPIRIT1 RF sub-GHz transceiver (with integrated SMPS), STM32L1 microcontroller, integrated filter/balun, and chip antenna.</p>

<p>There are two operational modes, <em>command mode </em>and <em>operating mode</em>. The command mode allows module configuration and status interrogation using an extended 'AT' style command set. In operating mode the module serves its primary purpose as a wireless transceiver.</p>

<p>In operating mode the module uses only 13.5mA, 2.2mA in command mode, and even lower in standby with just <strong>1.4µA</strong>. This kind of power consumption makes it ideal for smart devices that send small amounts of data.</p>

<p>The module has an integrated antenna and crystal.</p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>Sub-1 GHz Transceivers</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>Security systems, mobile health and medicine applications, IoT, wireless metering, etc.</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>SP1ML 868MHz ultra low-power RF module</td>
        </tr>
        <tr>
            <td>Radio Region</td>
            <td>Europe</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>Low data rate, low power sub-GHz transceiver</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>GPIO,UART</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>M (42.9 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<h3>PINOUT DIAGRAM</h3>

<p>This table shows how the pinout of <strong>SPIRIT Click Board™</strong> corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table>
    <tbody>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" data-entity-type="" data-entity-uuid="" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
        <tr>
            <td>NC</td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td><strong>SHDN</strong></td>
            <td>Shutdown</td>
        </tr>
        <tr>
            <td>Reset input, active low</td>
            <td><strong>RST</strong></td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Command mode</td>
            <td><strong>CMD</strong></td>
            <td>3</td>
            <td>CS</td>
            <td>TX</td>
            <td>14</td>
            <td><strong>TXD</strong></td>
            <td>UART transmit data</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>4</td>
            <td>SCK</td>
            <td>RX</td>
            <td>13</td>
            <td><strong>RXD</strong></td>
            <td>UART receive data</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Power supply</td>
            <td><strong>+3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td><strong>+5V</strong></td>
            <td>Power supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>JUMPERS AND SETTINGS</h3>

<p>LOGIC SEL - used to select 3.3 or 5V logical level for UART communication (J1A in the schematic).</p>

<h3> </h3>

<ul>
</ul>

- description_tag: The Spirit Click Board™ carries the SP1ML 868MHz ultra-low-power RF module. The board is designed to use a 3.3V power supply and 3.3V or 5V I/O voltage levels. Available from Debug Store UK.
- title_tag: MikroE Spirit Click Board™ (MIKROE-2568)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: Spirit Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 34.32
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 38.7816
- amazon_fr_currency: EUR
- amazon_fr_price: 38.7816
- amazon_es_currency: EUR
- amazon_es_price: 38.7816
- amazon_nl_currency: EUR
- amazon_nl_price: 38.7816
- amazon_it_currency: EUR
- amazon_it_price: 38.7816
- amazon_se_curency: SEK
- amazon_se_price: 391.248
- amazon_product_id: 8606018710287
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The SPIRIT Click Board™ carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality provided by the following pins on the MikroBUSline: PWM, RST, CS.It can be used to wirelessly send and receive UART data.
- amazon_long_description: <p>The SPIRIT Click Board™ carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality provided by the following pins on the MikroBUSline: PWM, RST, CS.</p><p><br />It can be used to wirelessly send and receive UART data.</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-spirit-click-board.jpg
- amazon_browse_node: 428655031
- mpn: MIKROE-2568
- backorder_label: If no stock shown above, check availability
- google_product_category: 5473
- condition: new
- custom_product: false
- mpn: MIKROE-2568
- google_product_category: Electronics
- custom_label_0: Click Board
- examples: 

<p>Code examples for the <strong>SPIRIT Click Board™</strong>, written for MikroElektronika hardware and compilers are available on Libstock.</p>

<h4>GENERAL DESCRIPTION</h4>

<p>The library implements communication protocol between the MCU host and SPIRIT click module. It can work in two modes, command mode and operating mode. The command mode allows module configuration and status interrogation using an extended ‘AT’ style command set. In operating mode the module serves its primary purpose as a wireless transceiver. It uses asynchronous approach to issue commands and receive responses via callback functions.</p>

<h4>CODE SNIPPET</h4>

<p>The code snippet shows an example callback function for the ATO command. It checks if the response is OK to change from library state to operating mode.</p>

<pre>
01 static bool on_ato(char* response)
02 {
03     if(strcmp(response, "OK") == 0)
04     {
05         LOG_INFO("Entered operating mode.");
06 
07         spirit_mode(SPIRIT_OPERATING_MODE);
08     }
09     else
10     {
11         LOG_ERROR("Failed to enter to operation mode...");
12     }
13 
14     return true;
15 }
</pre>

<h4>Features</h4>

<ul>
	<li>Configurable command buffer size.</li>
	<li>Ring buffer for receiving data via UART</li>
	<li>Supported mikroC compilers for ARM, PIC32, PIC, FT90.</li>
	<li>Asynchronous command issuing.</li>
</ul>

- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/981d4091c2c0--spirit-click-schematic-v100-1-b4691c.pdf?v=1650374234\">Spirit Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/981d4091c2c0--sp1ml-1-ba8db0.pdf?v=1650374293\">ST SP1ML RF Module Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- device_vendor: STMicroelectronics
- device_type: SP1ML-868
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-09T21:11:45Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241546166461"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"SPIRIT Click Board™","bold":true},{"type":"text","value":" carries the SP1ML 868MHz ultra low-power RF module. The board is designed to use 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over UART interface, with additional functionality provided by the following pins on the mikroBUS™ line: PWM, RST, CS."}]},{"type":"paragraph","children":[{"type":"text","value":"It can be used to wirelessly send and receive UART data."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SP1ML 868MHZ RF MODULE FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"SP1ML is based on the SPIRIT1 RF sub-GHz transceiver (with integrated SMPS), STM32L1 microcontroller, integrated filter/balun, and chip antenna."}]},{"type":"paragraph","children":[{"type":"text","value":"There are two operational modes, "},{"type":"text","value":"command mode ","italic":true},{"type":"text","value":"and "},{"type":"text","value":"operating mode","italic":true},{"type":"text","value":". The command mode allows module configuration and status interrogation using an extended 'AT' style command set. In operating mode the module serves its primary purpose as a wireless transceiver."}]},{"type":"paragraph","children":[{"type":"text","value":"In operating mode the module uses only 13.5mA, 2.2mA in command mode, and even lower in standby with just "},{"type":"text","value":"1.4µA","bold":true},{"type":"text","value":". This kind of power consumption makes it ideal for smart devices that send small amounts of data."}]},{"type":"paragraph","children":[{"type":"text","value":"The module has an integrated antenna and crystal."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nSub-1 GHz Transceivers\nApplications\nSecurity systems, mobile health and medicine applications, IoT, wireless metering, etc.\nOn-board modules\nSP1ML 868MHz ultra low-power RF module\nRadio Region\nEurope\nKey Features\nLow data rate, low power sub-GHz transceiver\nInterface\nGPIO,UART\nCompatibility\nmikroBUS\nClick board size\nM (42.9 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of "},{"type":"text","value":"SPIRIT Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nSHDN\nShutdown\nReset input, active low\nRST\n2\nRST\nINT\n15\nNC\nCommand mode\nCMD\n3\nCS\nTX\n14\nTXD\nUART transmit data\nNC\n4\nSCK\nRX\n13\nRXD\nUART receive data\nNC\n5\nMISO\nSCL\n12\nNC\nNC\n6\nMOSI\nSDA\n11\nNC\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"JUMPERS AND SETTINGS"}]},{"type":"paragraph","children":[{"type":"text","value":"LOGIC SEL - used to select 3.3 or 5V logical level for UART communication (J1A in the schematic)."}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]},{"type":"list","listType":"unordered","children":[]}]}
- summary: <p>The <em><strong>Spirit Click Board™</strong></em> carries the SP1ML 868MHz ultra-low-power RF module. The board is designed to use a 3.3V power supply and 3.3V or 5V I/O voltage levels. It communicates with the target MCU over the UART interface, with additional functionality provided by the following pins on the MikroBUS line: PWM, RST, CS.</p>
<p>It can be used to wirelessly send and receive UART data.</p>