# Title: MCP1664 Click Board™


## Description: The MCP1664 Click Board™ contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip. MCP1664 click is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the mikroBUS™ line. Note: Don't look directly at the LEDs while they are on, you could damage your eyesight. How Does The MCP1664 Click Board Work? The click has a power input and a PWM input, so you can set the light intensity at the level you want. MCP1664 IC FEATURES The MCP1664 is a compact, space-efficient, fixed-frequency, non-synchronous step-up converter optimized to drive multiple strings of LEDs with constant current powered from two and three-cell alkaline or NiMH/NiCd as well as from one-cell Li-Ion or Li-Polymer batteries. The MCP1664 features an open load protection (OLP) which turns off the operation in situations when the LED string is accidentally disconnected or the feedback pin is short-circuited to GND. While in Shutdown mode (EN = GND), the device stops switching and consumes 40 nA typical of input current. SPECIFICATIONS Type LED Drivers Applications White LED Driver for Backlighting Products, Li-IonBattery LED Lightning Application, etc. On-board modules MCP1664 module from Microchip Key Features You can set the light intensity Interface PWM Compatibility mikroBUS Click board size L (57.15 x 25.4 mm) Input Voltage 3.3V or 5V PINOUT DIAGRAM This table shows how the pinout of the MCP1664 Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 PWM PWM input NC 2 RST INT 15 NC NC 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 NC NC 6 MOSI SDA 11 NC Power supply +3.3V 7 3.3V 5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground MAXIMUM RATINGS Description Min Typ Max Unit Supply Voltage 2.4 5.5 V Max Out Voltage 32 V Max Out Current 4.2V Vin 8 LEDs 150 mA Max Out Current 3.3V Vin 4 LEDs 200 mA Max Out Current 5.0V Vin 4 LEDs 300 mA


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Click Board, Display Interface, LED Driver, MikroE


## Price range: 21.7 - 21.7 GBP


## Link: https://thedebugstore.com/products/mikroe-2548-mcp1664-click-board-uk


## Compare-at price range: 31.0 - 31.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Display & Interface Click Boards™](https://thedebugstore.com/a/llms/collections/display-interface-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [LED Driver Click Boards™](https://thedebugstore.com/a/llms/collections/led-driver-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-2548, Available: yes, Inventory: 1


## Metafields 

- full_description: <p>The <em><strong>MCP1664 Click Board™</strong></em> contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip. MCP1664 click is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the mikroBUS™ line.<br />
<br />
<img alt="" class="fr-fic fr-dii" data-entity-type="" data-entity-uuid="" src="https://shop.mikroe.com/img/cms/mcp1664-click-led-lightup.jpg" /></p>

<div><strong>Note</strong>: Don't look directly at the LEDs while they are on, you could damage your eyesight. </div>

<h3>How Does The MCP1664 Click Board Work? </h3>

<p>The click has a power input and a PWM input, so you can set the light intensity at the level you want.</p>

<h3>MCP1664 IC FEATURES</h3>

<p>The MCP1664 is a compact, space-efficient, fixed-frequency, non-synchronous step-up converter optimized to drive multiple strings of LEDs with constant current powered from two and three-cell alkaline or NiMH/NiCd as well as from one-cell Li-Ion or Li-Polymer batteries. </p>

<p>The MCP1664 features an open load protection (OLP) which turns off the operation in situations when the LED string is accidentally disconnected or the feedback pin is short-circuited to GND.</p>

<p>While in Shutdown mode (EN = GND), the device stops switching and consumes 40 nA typical of input current. </p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>LED Drivers</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>White LED Driver for Backlighting Products, Li-IonBattery LED Lightning Application, etc.</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>MCP1664 module from Microchip</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>You can set the light intensity</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>PWM</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>L (57.15 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<h3>PINOUT DIAGRAM</h3>

<p>This table shows how the pinout of the <strong>MCP1664 Click Board™</strong> corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table>
    <thead>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" class="fr-fic fr-dii" data-entity-type="" data-entity-uuid="" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <td>NC</td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td><strong>PWM</strong></td>
            <td>PWM input</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>3</td>
            <td>CS</td>
            <td>TX</td>
            <td>14</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>4</td>
            <td>SCK</td>
            <td>RX</td>
            <td>13</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>Power supply</td>
            <td><strong>+3.3V</strong></td>
            <td>7</td>
            <td>3.3V</td>
            <td>5V</td>
            <td>10</td>
            <td><strong>+5V</strong></td>
            <td>Power supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>MAXIMUM RATINGS</h3>

<table>
    <thead>
        <tr>
            <th>Description</th>
            <th>Min</th>
            <th>Typ</th>
            <th>Max</th>
            <th>Unit</th>
        </tr>
    </thead>
    <tbody>
        <tr>
            <td>Supply Voltage</td>
            <td>2.4</td>
            <td>5.5</td>
            <td>V</td>
        </tr>
        <tr>
            <td>Max Out Voltage</td>
            <td>32</td>
            <td>V</td>
        </tr>
        <tr>
            <td>Max Out Current 4.2V Vin 8 LEDs</td>
            <td>150</td>
            <td>mA</td>
        </tr>
        <tr>
            <td>Max Out Current 3.3V Vin 4 LEDs</td>
            <td>200</td>
            <td>mA</td>
        </tr>
        <tr>
            <td>Max Out Current 5.0V Vin 4 LEDs</td>
            <td>300</td>
            <td>mA</td>
        </tr>
    </tbody>
</table>

<h3> </h3>

<div> </div>

- description_tag: The MCP1664 Click Board™ contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip. Available from Debug Store UK.
- title_tag: MikroE MCP1664 Click Board™ (MIKROE-2548)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: MCP1664 Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 22.88
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 25.8544
- amazon_fr_currency: EUR
- amazon_fr_price: 25.8544
- amazon_es_currency: EUR
- amazon_es_price: 25.8544
- amazon_nl_currency: EUR
- amazon_nl_price: 25.8544
- amazon_it_currency: EUR
- amazon_it_price: 25.8544
- amazon_se_curency: SEK
- amazon_se_price: 260.832
- amazon_product_id: 8606018710546
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The MCP1664 Click Board™ contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip.MCP1664 Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the MikroBUSline.
- amazon_long_description: <p>The MCP1664 Click Board™ contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip.</p><p>MCP1664 Click Board™ is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the MikroBUSline.</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-mcp1664-click-front.jpg
- amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-mcp1664-click-back.jpg
- amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-mcp1664-click-fusion.jpg
- amazon_browse_node: 428655031
- mpn: MIKROE-2548
- backorder_label: If no stock shown above, check availability
- google_product_category: 275
- condition: new
- custom_product: false
- mpn: MIKROE-2548
- google_product_category: Electronics
- custom_label_0: Click Board
- examples: 

<p>Code examples for the <strong>MCP1664 Click Board™</strong>, written for MikroElektronika hardware and compilers are available on&nbsp;Libstock.</p>

<h4>CODE SNIPPET</h4>

<p>This code snippet shows basic control of light brightness with PWM. The duty cycle is controlled with the potentiometer P1.</p>

<div>
<pre>
01 uint16_t current_duty;
02 uint16_t adc_rd;
03 void MCU_Init()
04 {
05 TRISC = 0; // designate PORTC pins as output
06 LATC = 0; // set PORTC to 0
07 PWM2_Init( 5000 ); // Initialize PWM2 module at 5KHz
08 }
09 void main()
10 {
11 MCU_Init();
12 current_duty = 0;
13 PWM2_Start();
14 PWM2_Set_Duty(current_duty);
15 while ( 1 ) // Playing with Potentiometer P1 you can control current PWM duty cycle
16 {
17 adc_rd = ADC_Read(1) &amp; 0x0000FFFF; // Read 10 - bit ADC value and set newly acquired 8 - bit PWM duty
18 current_duty = adc_rd / 4 ;
19 PWM2_Set_Duty(current_duty ); // Set newly acquired duty
20 }
21
22 }</pre>
</div>

- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/bdfc41426161--mcp1664-click-schematic-1-52e348.pdf?v=1650370562\">MCP1664 Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/bdfc41426161--MCP1664-1-975809.pdf?v=1650370593\">Microchip MCP1664 LED Driver Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- device_vendor: Microchip Technology
- device_type: MCP1664T-E/OT
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-09T22:04:35Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241544822973"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"MCP1664 Click Board™","bold":true,"italic":true},{"type":"text","value":" contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip. MCP1664 click is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the mikroBUS™ line."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"Note","bold":true},{"type":"text","value":": Don't look directly at the LEDs while they are on, you could damage your eyesight. "}]},{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The MCP1664 Click Board Work? "}]},{"type":"paragraph","children":[{"type":"text","value":"The click has a power input and a PWM input, so you can set the light intensity at the level you want."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"MCP1664 IC FEATURES"}]},{"type":"paragraph","children":[{"type":"text","value":"The MCP1664 is a compact, space-efficient, fixed-frequency, non-synchronous step-up converter optimized to drive multiple strings of LEDs with constant current powered from two and three-cell alkaline or NiMH/NiCd as well as from one-cell Li-Ion or Li-Polymer batteries. "}]},{"type":"paragraph","children":[{"type":"text","value":"The MCP1664 features an open load protection (OLP) which turns off the operation in situations when the LED string is accidentally disconnected or the feedback pin is short-circuited to GND."}]},{"type":"paragraph","children":[{"type":"text","value":"While in Shutdown mode (EN = GND), the device stops switching and consumes 40 nA typical of input current. "}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nLED Drivers\nApplications\nWhite LED Driver for Backlighting Products, Li-IonBattery LED Lightning Application, etc.\nOn-board modules\nMCP1664 module from Microchip\nKey Features\nYou can set the light intensity\nInterface\nPWM\nCompatibility\nmikroBUS\nClick board size\nL (57.15 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"MCP1664 Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nPWM\nPWM input\nNC\n2\nRST\nINT\n15\nNC\nNC\n3\nCS\nTX\n14\nNC\nNC\n4\nSCK\nRX\n13\nNC\nNC\n5\nMISO\nSCL\n12\nNC\nNC\n6\nMOSI\nSDA\n11\nNC\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"MAXIMUM RATINGS"}]},{"type":"paragraph","children":[{"type":"text","value":"Description\nMin\nTyp\nMax\nUnit\nSupply Voltage\n2.4\n5.5\nV\nMax Out Voltage\n32\nV\nMax Out Current 4.2V Vin 8 LEDs\n150\nmA\nMax Out Current 3.3V Vin 4 LEDs\n200\nmA\nMax Out Current 5.0V Vin 4 LEDs\n300\nmA"}]},{"type":"heading","level":3,"children":[{"type":"text","value":" "}]},{"type":"paragraph","children":[{"type":"text","value":" "}]}]}
- summary: <p>The <strong><em>MCP1664 Click Board™</em></strong> contains 4 high-power white LEDs. It carries the MCP1664, a high-voltage step-up LED driver from Microchip.</p>
<p>The <strong>MCP1664 Click Board™</strong> is designed to run on either 3.3V or 5V power supply. It communicates with the target board microcontroller over the PWM pin on the MikroBUS lines.</p>