# Title: Thermo K Click Board™


## Description: Temperature Range With the Type-K Probe, available in our store, this click can measure temperature up to +480 °C. With a different probe it can theoretically measure temperature up to +1372 °C. The Thermo K Click Board™ has a PCC-SMP thermocouple connector onboard, suitable for all K-type probes. Microchip MCP9600 The MCP9600 IC converts thermocouple EMF to degree Celsius with integrated Cold-Junction compensation. It corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±1.5°C accurate temperature data. 4 Alert Outputs The Thermo K Click Board™ has 4 alert outputs onboard that can be used to detect multiple temperature zones. You can define on which specific temperature the THERMO K click will send an alarm. Low Power Modes Low-Power modes are available for battery-powered applications. In shut-down mode the module uses only 2 µA. THERMOCOUPLE PROBE To use the Thermo K Click Board™ you need to connect the appropriate K-type thermocouple probe (not included in the package) into the PCC-SMP connector. Note: We offer the Thermocouple Type-K Glass Braid Insulated probes. APPLICATION Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc. SPECIFICATIONS Type Temperature & humidity Applications Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc. On-board modules MCP9600 IC from Microchip Key Features Operating Current: 300 µA, Shutdown Current: 2 µA Interface GPIO,I2C Compatibility mikroBUS Click board size M (42.9 x 25.4 mm) Input Voltage 3.3V or 5V The Thermo K Click Board™ carries the MCP9600 IC from Microchip and and depending on the type of probe it uses, the click can measure temperatures from −200 °C to +1372 °C. The Thermo K Click Board™ is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface. Pinout Diagram This table shows how the pinout on the Thermo K Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes Alert 4 output Alert 4 1 AN PWM 16 ALERT2 Alert 2 output Alert 3 output ALERT3 2 RST INT 15 ALERT1 Alert 1 output NC 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 SCL I2C Clock NC 6 MOSI SDA 11 SDA I2C Data Power supply +3.3V 7 +3.3V +5V 10 +5V Power supply Ground GND 8 GND GND 9 GND Ground Jumpers and Settings Designator Name Default Position Default Option Description: JP1 PWR.SEL. Left 3V3 Power Supply Voltage Selection 3V3/5V, left position 3v3, right position 5V JP2 ADDR. SEL. Right GND I2C address Selection. Left position (VDD) is 1100111x and right position (GND) is 1100000x .


## Product type: Click Board


## Vendor: Mikroelektronika d.o.o.


## Tags: Click Board, MikroE, Sensor, Temp&Hum, Temperature


## Price range: 25.9 - 25.9 GBP


## Link: https://thedebugstore.com/products/mikroe-2501-thermo-k-click-board-uk


## Compare-at price range: 37.0 - 37.0 GBP


## Options 

- Title: Default Title


## Collections

- [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store)
- [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk)
- [Sensor Click Boards™](https://thedebugstore.com/a/llms/collections/sensor-click-boards-catalogue)
- [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk)
- [Temperature Sensor Click Boards™](https://thedebugstore.com/a/llms/collections/temperature-sensor-click-boards-catalogue)
- [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale)
- [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale)
- [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale)

## Variants

- Default Title, SKU: MIKROE-2501, Available: yes, Inventory: 1


## Metafields 

- full_description: <h3>Temperature Range</h3>

<p>With the Type-K Probe, available in our store, this click can measure temperature up to +480 °C. With a different probe it can theoretically measure temperature up to +1372 °C.</p>

<p>The <strong>Thermo K Click Board™</strong> has a PCC-SMP thermocouple connector onboard, suitable for all K-type probes.</p>

<h3>Microchip MCP9600</h3>

<p>The MCP9600 IC converts thermocouple EMF to degree Celsius with integrated Cold-Junction compensation. It corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±1.5°C accurate temperature data.</p>

<h3>4 Alert Outputs</h3>

<p>The <strong>Thermo K Click Board™</strong> has 4 alert outputs onboard that can be used to detect multiple temperature zones. You can define on which specific temperature the THERMO K click will send an alarm.</p>

<h3>Low Power Modes</h3>

<p>Low-Power modes are available for battery-powered applications. In shut-down mode the module uses only 2 µA.</p>

<h3>THERMOCOUPLE PROBE</h3>

<p>To use the <strong>Thermo K Click Board™</strong> you need to connect the appropriate K-type thermocouple probe (not included in the package) into the PCC-SMP connector.</p>

<p><strong>Note: </strong>  We offer the Thermocouple Type-K Glass Braid Insulated probes.</p>

<h3>APPLICATION</h3>

<p>Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc.</p>

<h3>SPECIFICATIONS</h3>

<table>
    <tbody>
        <tr>
            <td>Type</td>
            <td>Temperature & humidity</td>
        </tr>
        <tr>
            <td>Applications</td>
            <td>Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc.</td>
        </tr>
        <tr>
            <td>On-board modules</td>
            <td>MCP9600 IC from Microchip</td>
        </tr>
        <tr>
            <td>Key Features</td>
            <td>Operating Current: 300 µA, Shutdown Current: 2 µA</td>
        </tr>
        <tr>
            <td>Interface</td>
            <td>GPIO,I2C</td>
        </tr>
        <tr>
            <td>Compatibility</td>
            <td>mikroBUS</td>
        </tr>
        <tr>
            <td>Click board size</td>
            <td>M (42.9 x 25.4 mm)</td>
        </tr>
        <tr>
            <td>Input Voltage</td>
            <td>3.3V or 5V</td>
        </tr>
    </tbody>
</table>

<p>The <strong>Thermo K Click Board™</strong> carries the  <strong>MCP9600 IC from Microchip </strong> and and depending on the type of probe it uses, the click can measure temperatures from −200 °C to +1372 °C. The <strong>Thermo K Click Board™</strong> is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface.</p>

<h3>Pinout Diagram</h3>

<p>This table shows how the pinout on the <strong>Thermo K Click Board™</strong> corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).</p>

<table>
    <tbody>
        <tr>
            <th>Notes</th>
            <th>Pin</th>
            <th colspan="4"><img alt="Mikrobus logo.png" data-entity-type="" data-entity-uuid="" data-mce-src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" src="https://cdn.mikroe.com/img/mikrobus/mikroBUS-logo-black.png" /></th>
            <th>Pin</th>
            <th>Notes</th>
        </tr>
        <tr>
            <td>Alert 4 output</td>
            <td><strong>Alert 4</strong></td>
            <td>1</td>
            <td>AN</td>
            <td>PWM</td>
            <td>16</td>
            <td><strong>ALERT2</strong></td>
            <td>Alert 2 output</td>
        </tr>
        <tr>
            <td>Alert 3 output</td>
            <td><strong>ALERT3</strong></td>
            <td>2</td>
            <td>RST</td>
            <td>INT</td>
            <td>15</td>
            <td><strong>ALERT1</strong></td>
            <td>Alert 1 output</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>3</td>
            <td>CS</td>
            <td>TX</td>
            <td>14</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>4</td>
            <td>SCK</td>
            <td>RX</td>
            <td>13</td>
            <td>NC</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>5</td>
            <td>MISO</td>
            <td>SCL</td>
            <td>12</td>
            <td><strong>SCL</strong></td>
            <td>I2C Clock</td>
        </tr>
        <tr>
            <td>NC</td>
            <td>6</td>
            <td>MOSI</td>
            <td>SDA</td>
            <td>11</td>
            <td><strong>SDA</strong></td>
            <td>I2C Data</td>
        </tr>
        <tr>
            <td>Power supply</td>
            <td><strong>+3.3V</strong></td>
            <td>7</td>
            <td>+3.3V</td>
            <td>+5V</td>
            <td>10</td>
            <td><strong>+5V</strong></td>
            <td>Power supply</td>
        </tr>
        <tr>
            <td>Ground</td>
            <td><strong>GND</strong></td>
            <td>8</td>
            <td>GND</td>
            <td>GND</td>
            <td>9</td>
            <td><strong>GND</strong></td>
            <td>Ground</td>
        </tr>
    </tbody>
</table>

<h3>Jumpers and Settings</h3>

<table>
    <tbody>
        <tr>
            <th>Designator</th>
            <th>Name</th>
            <th>Default Position</th>
            <th>Default Option</th>
            <th>Description:</th>
        </tr>
        <tr>
            <td>JP1</td>
            <td>PWR.SEL.</td>
            <td>Left</td>
            <td>3V3</td>
            <td>Power Supply Voltage Selection 3V3/5V, left position 3v3, right position 5V</td>
        </tr>
        <tr>
            <td>JP2</td>
            <td>ADDR. SEL.</td>
            <td>Right</td>
            <td>GND</td>
            <td>I2C address Selection. Left position (VDD) is 1100111x and right position (GND) is 1100000x .</td>
        </tr>
    </tbody>
</table>

- description_tag: The Thermo K Click Board™ carries the MCP9600 IC from Microchip. Depending on the type of probe it uses the Click Board™ can measure temperatures from -200°C to +1372°C. Available from Debug Store UK.
- title_tag: MikroE Thermo K Click Board™ (MIKROE-2501)
- manufacturer: Mikroelektronika d.o.o.
- warranty: 12 months
- amazon_enable: TRUE
- amazon_title: Thermo K Click Board
- amazon_product_type: computercomponent
- amazon_block: FALSE
- amazon_prime_enable: FALSE
- amazon_search: MikroElektronika Microelectronica MIKROE-1100
- amazon_uk_price: 21.12
- amazon_uk_currency: GBP
- amazon_de_currency: EUR
- amazon_de_price: 23.8656
- amazon_fr_currency: EUR
- amazon_fr_price: 23.8656
- amazon_es_currency: EUR
- amazon_es_price: 23.8656
- amazon_nl_currency: EUR
- amazon_nl_price: 23.8656
- amazon_it_currency: EUR
- amazon_it_price: 23.8656
- amazon_se_curency: SEK
- amazon_se_price: 240.768
- amazon_product_id: 8606015079448
- amazon_product_id_type: EAN
- amazon_update: Update
- amazon_short_description: The THERMO K Click Board™ carries the MCP9600 IC from Microchip. Depending on the type of probe it uses the Click Board™ can measure temperatures from -200°C tp +1372°C.
- amazon_long_description: <h2>Temperature range</h2><p>With the type-K probe, available in our store, this Click can measure temperature up to +480.</p>
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-thermo-k-click-board-angle.jpg
- amazon_browse_node: 428655031
- related_products: MIKROE-1302,MIKROE-1197,MIKROE-1840,MIKROE-1885,MIKROE-2632,MIKROE-2571,MIKROE-2811
- mpn: MIKROE-2501
- backorder_label: If no stock shown above, check availability
- examples: 

<p>The demo shows the temperature on the TFT or LCD display. It measures every half a second. We have examples for PIC, dsPIC, PIC32, ARM, AVR and FT90x compilers. The code snippet is from the Example folder of the PIC compiler and P18F87K22 MCU.</p>

<p>This example is a temperature reading routine. First, we are reading the “Thermocouple Temperature Register” and then we are converting the value to a temperature in the Celsius scale.</p>

<pre>
 1  float Read_Temperature()
 2 {
 3     float Temperature;
 4 
 5     tmp_data[0] = MCP9600_TH;                                              
 6 
 7     I2C1_Start();
 8     I2C1_Wr( MCP9600_I2C_ADDR );
 9     I2C1_Wr( tmp_data[ 0 ] );
10     I2C1_Stop();
11     Delay_us( 50 );
12     I2C1_Start();
13     I2C1_Wr( MCP9600_I2C_ADDR | 1 );
14     tmp_data[ 0 ] = I2C1_Rd( 1 );
15     tmp_data[ 1 ] = I2C1_Rd( 0 );
16     I2C1_Stop();
17 
18     if((tmp_data[0] &amp; 0x80) == 0x80)
19     {
20         tmp_data[0] = tmp_data[0] &amp; 0x7F;                                           
21         Temperature = 1024 - (tmp_data[0]*16 + tmp_data[1] / 16);
22     }
23     else
24     {                                                                          
25         Temperature = (tmp_data[0] * 16 + (float)tmp_data[1] / 16);                 
26     }
27 
28     return Temperature;                                                           
29 }</pre>

- attachments: [{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/5c34e6b4cceb--thermo-k-click-schematic-v102-1-5231b9.pdf?v=1637075048\">Thermo K Click Board™ Schematic</a>"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"<a href=\"https://cdn.shopify.com/s/files/1/0522/6931/8333/t/14/assets/5c34e6b4cceb--MCP960X-L0X-RL0X-Data-Sheet-20005426F-1-14c395.pdf?v=1637075120\">Microchip MCP9600 Thermocouple to Digital Temperature Converter Datasheet</a>"}],"download_filetype":[{"download_filetype":"pdf"}]}]
- condition: new
- custom_product: false
- mpn: MIKROE-2501
- google_product_category: Electronics
- custom_label_0: Click Board
- device_vendor: Microchip Technology
- device_type: MCP9600-E/MX
- warranty: 12 months
- brand: MikroE
- manufacturer: Mikroelektronika d.o.o.
- badge: <div style='display:none' class='jdgm-prev-badge' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <span class='jdgm-prev-badge__stars' data-score='0.00' tabindex='0' aria-label='0.00 stars' role='button'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </span> <span class='jdgm-prev-badge__text'> No reviews </span> </div>
- widget: <div class='jdgm-rev-widg' data-updated-at='2024-08-09T18:51:59Z' data-average-rating='0.00' data-number-of-reviews='0' data-number-of-questions='0'> <style class='jdgm-temp-hiding-style'>.jdgm-rev-widg{ display: none }</style> <div class='jdgm-rev-widg__header'> <h2 class='jdgm-rev-widg__title'>Customer Reviews</h2>  <div class='jdgm-rev-widg__summary'> <div class='jdgm-rev-widg__summary-stars' aria-label='Average rating is 0.00 stars' role='img'> <span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span> </div> <div class='jdgm-rev-widg__summary-text'>Be the first to write a review</div> </div> <a style='display: none' href='#' class='jdgm-write-rev-link' role='button'>Write a review</a> <div class='jdgm-histogram jdgm-temp-hidden'>  <div class='jdgm-histogram__row' data-rating='5' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 5 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='4' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 4 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='3' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 3 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='2' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 2 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row' data-rating='1' data-frequency='0' data-percentage='0'>  <div class='jdgm-histogram__star' role='button' aria-label="0% (0) reviews with 1 star rating"  tabindex='0' ><span class='jdgm-star jdgm--on'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span><span class='jdgm-star jdgm--off'></span></div> <div class='jdgm-histogram__bar'> <div class='jdgm-histogram__bar-content' style='width: 0%;'> </div> </div> <div class='jdgm-histogram__percentage'>0%</div> <div class='jdgm-histogram__frequency'>(0)</div> </div>  <div class='jdgm-histogram__row jdgm-histogram__clear-filter' data-rating=null tabindex='0'></div> </div>     <div class='jdgm-rev-widg__sort-wrapper'></div> </div> <div class='jdgm-rev-widg__body'> <div class='jdgm-rev-widg__reviews'></div> <div class='jdgm-paginate' data-per-page='5' data-url='https://judge.me/reviews/reviews_for_widget'></div> </div> <div class='jdgm-rev-widg__paginate-spinner-wrapper'> <div class='jdgm-spinner'></div> </div> </div>
- brands: gid://shopify/Metaobject/56256004319
- breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241545969853"]
- customhs_code: 847330
- detailed_description: {"type":"root","children":[{"type":"heading","level":3,"children":[{"type":"text","value":"Temperature Range"}]},{"type":"paragraph","children":[{"type":"text","value":"With the Type-K Probe, available in our store, this click can measure temperature up to +480 °C. With a different probe it can theoretically measure temperature up to +1372 °C."}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Thermo K Click Board™","bold":true},{"type":"text","value":" has a PCC-SMP thermocouple connector onboard, suitable for all K-type probes."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Microchip MCP9600"}]},{"type":"paragraph","children":[{"type":"text","value":"The MCP9600 IC converts thermocouple EMF to degree Celsius with integrated Cold-Junction compensation. It corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±1.5°C accurate temperature data."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"4 Alert Outputs"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Thermo K Click Board™","bold":true},{"type":"text","value":" has 4 alert outputs onboard that can be used to detect multiple temperature zones. You can define on which specific temperature the THERMO K click will send an alarm."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Low Power Modes"}]},{"type":"paragraph","children":[{"type":"text","value":"Low-Power modes are available for battery-powered applications. In shut-down mode the module uses only 2 µA."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"THERMOCOUPLE PROBE"}]},{"type":"paragraph","children":[{"type":"text","value":"To use the "},{"type":"text","value":"Thermo K Click Board™","bold":true},{"type":"text","value":" you need to connect the appropriate K-type thermocouple probe (not included in the package) into the PCC-SMP connector."}]},{"type":"paragraph","children":[{"type":"text","value":"Note: ","bold":true},{"type":"text","value":"  We offer the Thermocouple Type-K Glass Braid Insulated probes."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"APPLICATION"}]},{"type":"paragraph","children":[{"type":"text","value":"Hand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nTemperature & humidity\nApplications\nHand-held measurement equipment, industrial equipment thermal management, petrochemical thermal management, etc.\nOn-board modules\nMCP9600 IC from Microchip\nKey Features\nOperating Current: 300 µA, Shutdown Current: 2 µA\nInterface\nGPIO,I2C\nCompatibility\nmikroBUS\nClick board size\nM (42.9 x 25.4 mm)\nInput Voltage\n3.3V or 5V"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"Thermo K Click Board™","bold":true},{"type":"text","value":" carries the  "},{"type":"text","value":"MCP9600 IC from Microchip ","bold":true},{"type":"text","value":" and and depending on the type of probe it uses, the click can measure temperatures from −200 °C to +1372 °C. The "},{"type":"text","value":"Thermo K Click Board™","bold":true},{"type":"text","value":" is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Pinout Diagram"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout on the "},{"type":"text","value":"Thermo K Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nAlert 4 output\nAlert 4\n1\nAN\nPWM\n16\nALERT2\nAlert 2 output\nAlert 3 output\nALERT3\n2\nRST\nINT\n15\nALERT1\nAlert 1 output\nNC\n3\nCS\nTX\n14\nNC\nNC\n4\nSCK\nRX\n13\nNC\nNC\n5\nMISO\nSCL\n12\nSCL\nI2C Clock\nNC\n6\nMOSI\nSDA\n11\nSDA\nI2C Data\nPower supply\n+3.3V\n7\n+3.3V\n+5V\n10\n+5V\nPower supply\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Jumpers and Settings"}]},{"type":"paragraph","children":[{"type":"text","value":"Designator\nName\nDefault Position\nDefault Option\nDescription:\nJP1\nPWR.SEL.\nLeft\n3V3\nPower Supply Voltage Selection 3V3/5V, left position 3v3, right position 5V\nJP2\nADDR. SEL.\nRight\nGND\nI2C address Selection. Left position (VDD) is 1100111x and right position (GND) is 1100000x ."}]}]}
- summary: <p>The <em><strong>Thermo K Click Board™</strong></em> carries the MCP9600 IC from Microchip. Depending on the type of probe it uses the Click Board™ can measure temperatures from -200°C to +1372°C.</p>
<p><span>The <strong data-mce-fragment="1">Thermo K Click Board™</strong> is designed to run either on a 3.3V or 5V power supply. It communicates with the target MCU through the I2C interface.</span></p>