# Title: WiFi 3 Click Board™ ## Description: The WiFi3 Click Board™ is a complete self-contained WiFi solution carrying the ESP8266 module with a system on a chip. The click is designed to run on a 3.3V power supply only. It communicates with the target board microcontroller through the mikroBUS™ RX, TX, CS and RST lines. ESP8266 WiFi module The module supports standard IEEE802.11 b/g/n agreement and has an integrated TCP/IP protocol stack. It also integrates antenna switches, an RF balun, power amplifier, low noise receive amplifier, power management modes and more. The Standby power consumption of < 1.0mW is ideally suited for IoT projects and devices that need long battery life. Ideally suited for IoT applications The WiFi3 Click Board™ is ideally suited for IoT applications. The System on Chip offloads all the networking functions from the MCU. You can integrate it with sensors and actuators through its GPIOs and connect your things to the internet with minimum development effort. PCB antenna WiFi3 click features a PCB trace antenna, designed for the 2400–2483.5 MHz frequency band. Key Features PCB trace antenna ESP8266 WiFi module 802.11 b/g/n Integrated low power 32-bit MCU Integrated 10-bit ADC Integrated TCP/IP protocol stack Wi-Fi 2.4 GHz, support WPA/WPA2 Interface: RX, TX, CS, RST 3.3V power supply ## Product type: Click Board ## Vendor: Mikroelektronika d.o.o. ## Tags: Click Board, ESP8266, MikroE, WiFi, Wireless ## Price range: 18.08 - 18.08 GBP ## Link: https://thedebugstore.com/products/mikroe-1769-wifi-3-click-board-uk ## Compare-at price range: 25.83 - 25.83 GBP ## Options - Title: Default Title ## Collections - [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store) - [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk) - [Wireless Interface Click Boards™](https://thedebugstore.com/a/llms/collections/wireless-interface-click-boards-catalogue) - [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk) - [WiFi Click Boards™](https://thedebugstore.com/a/llms/collections/wifi-click-boards-catalogue) - [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale) - [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale) - [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale) ## Variants - Default Title, SKU: MIKROE-1769, Available: yes, Inventory: 3 ## Metafields - full_description:
The WiFi3 Click Board™ is a complete self-contained WiFi solution carrying the ESP8266 module with a system on a chip. The click is designed to run on a 3.3V power supply only. It communicates with the target board microcontroller through the mikroBUS™ RX, TX, CS and RST lines.
The module supports standard IEEE802.11 b/g/n agreement and has an integrated TCP/IP protocol stack.
It also integrates antenna switches, an RF balun, power amplifier, low noise receive amplifier, power management modes and more.
The Standby power consumption of < 1.0mW is ideally suited for IoT projects and devices that need long battery life.
The WiFi3 Click Board™ is ideally suited for IoT applications. The System on Chip offloads all the networking functions from the MCU. You can integrate it with sensors and actuators through its GPIOs and connect your things to the internet with minimum development effort.
WiFi3 click features a PCB trace antenna, designed for the 2400–2483.5 MHz frequency band.
ESP8266 is a highly integrated chip designed to meet the users' need of an internet connected world. This self-contained WiFi networking solution can be used with sensors and other application specific devices through its GPIOs thanks to its on-board processing and storage capabilities. It allows to either host the application or to offload all WiFi networking functions from another application processor.
WiFi3 Click Board™ uses a PCB antenna that is designed for frequency band ranging from 2400-2483.5 MHz. One of the major reasons to use a PCB antenna is the reduced overall cost of the module.
The WiFi 3 Click Board™ communicates with the target board MCU via mikroBUS RX, TX, AN (PWD) and RST (G15) lines. These correspond to CH_PD and GPIO15 pins on the module. When you connect board to the mikroBUS socket, set the PWD pin to VCC and the G15 pin to GND from within the code.
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-mikroe-click-wifi-3_1.jpg - amazon_browse_node: 428655031 - mpn: MIKROE-1769 - backorder_label: If no stock shown above, check availability - google_product_category: 222 - condition: new - custom_product: false - mpn: MIKROE-1769 - google_product_category: Electronics - custom_label_0: Click Board - attachments: [{"download_file":[{"download_file":"MikroE WiFi Click Boards™ Guide"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"WiFi 3 Click Board™ Schematic"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"AI Thinker ES8266 WiFi Module Datasheet"}],"download_filetype":[{"download_filetype":"pdf"}]}] - warranty: 12 months - brand: MikroE - key_feature_1: Low-power 2.4GHz 802.11 b/g/n WiFi Interface - manufacturer: Mikroelektronika d.o.o. - badge: - widget:The WiFi 3 Click Board™ from MikroE is a powerful communication add-on board with the ES8266 module that provides the easiest way to connect your devices to the internet. This WiFi module makes an ideal addition to a Click Board™ collection if the user wants to venture into IoT. WiFi3 Click Board™ features a combination of ESP8266 module with a system-on-chip.
The module further includes an integrated TCP/IP stack and supports WiFi Direct (p2p). The System on Chip (SoC) offers powerful on-board processing and storage capabilities for a WiFi module and offloads all networking functions from the microcontroller. Other than the standard MikroBUS socket, WiFi3 Click Board™ includes 6 additional GPIO pins for a user to connect and control external electronics. It also features a PCB trace antenna that works for the 2400-2483.5 MHz frequency band. WiFi 3 Click Board™ is designed to use a 3.3V power supply only.
Connect anything from a simple LED, data logger, or some type of sensor or switch in a smart-home using this complete self-contained WiFi solution!.