# Title: Clicker Board 2 for STM32 ## Description: Technical Specifications Thousands of possibilities with click boards. With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 1000 add-on boards. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is halfway done. Go ahead and play with a few ideas right away. Programming.To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for STM32 connector enables programming through external programmer/debugger. Power Management.Clicker 2 for STM32 features LTC®3586, a highly integrated power management and battery charger IC that includes a current-limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board. Powering Your Inventions Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a charger for the li-po battery. It can also maintain an independent power supply to the MCU's RTC even when you push the RESET button or toggle the ON/OFF switch. Processor - STM32F407VGT6 (ARM Cortex-M4) - 1024kB Flash, 192kB RAM - 168MHz operation Connectivity - 52 programmable GPIOs - 2 mikroBUS host sockets - USB MINI-B connector Expanding Your Ideas No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want. HID Bootloader Inside To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. Hardware Debugging Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for STM32®. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our ARM® compilers. HID Bootloader Inside To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. ## Product type: Clicker Board ## Vendor: Mikroelektronika d.o.o. ## Tags: Clicker Board, Cortex, Linear Technology, MikroE, STM32, STMicroelectronics ## Price range: 83.3 - 83.3 GBP ## Link: https://thedebugstore.com/products/mikroe-1685-clicker-2-stm32-uk ## Compare-at price range: 119.0 - 119.0 GBP ## Options - Title: Default Title ## Collections - [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store) - [Clicker Boards](https://thedebugstore.com/a/llms/collections/mikroe-clicker-boards-catalogue) - [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk) - [Comprehensive Device Support and Solutions from Linear Technology for Debug Store](https://thedebugstore.com/a/llms/collections/linear-technology-device-support) - [STMicroelectronics Device Support - Debug Store](https://thedebugstore.com/a/llms/collections/stmicroelectronics-device-support) - [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale) - [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale) ## Variants - Default Title, SKU: MIKROE-1685, Available: yes, Inventory: 5 ## Metafields - full_description:

Technical Specifications

Thousands of possibilities with click boards. With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 1000 add-on boards. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is halfway done. Go ahead and play with a few ideas right away.

Programming.To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware. On-board mikroProg for STM32 connector enables programming through external programmer/debugger.

Power Management.Clicker 2 for STM32 features LTC®3586, a highly integrated power management and battery charger IC that includes a current-limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board.

Powering Your Inventions

clicker_2_pic18fj_dimensions.png

Focus on your main idea because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a charger for the li-po battery. It can also maintain an independent power supply to the MCU's RTC even when you push the RESET button or toggle the ON/OFF switch.

icon_mcu.png

Processor

- STM32F407VGT6 (ARM Cortex-M4)
- 1024kB Flash, 192kB RAM
- 168MHz operation

icon_connectivity.png

Connectivity

- 52 programmable GPIOs
- 2 mikroBUS host sockets
- USB MINI-B connector

Expanding Your Ideas

No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.

clicker_2_pic18fj_shields.png

HID Bootloader Inside

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.

Hardware Debugging

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for STM32®. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our ARM® compilers.

HID Bootloader Inside

HID Bootloader Inside

To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware.

 

- description_tag: Put together different Click Boards™ and invent fully-functional standalone gadgets with utmost ease using the Clicker 2 Board™ for STM32. This Clicker 2 Board™ board is a fast and compact Click Board™ two-seater equipped with STM32F407VGT6 32-bit ARM Cortex-M4 microcontroller. Available from Debug Store UK. - title_tag: MikroE Clicker Board 2 for STM32 (MIKROE-1685) - manufacturer: Mikroelektronika d.o.o. - warranty: 12 months - amazon_enable: TRUE - amazon_title: Clicker Board 2 for STM32 - amazon_product_type: computercomponent - amazon_block: FALSE - amazon_prime_enable: FALSE - amazon_search: MikroElektronika Microelectronica MIKROE-1100 - amazon_uk_price: 34.32 - amazon_uk_currency: GBP - amazon_de_currency: EUR - amazon_de_price: 38.7816 - amazon_fr_currency: EUR - amazon_fr_price: 38.7816 - amazon_es_currency: EUR - amazon_es_price: 38.7816 - amazon_nl_currency: EUR - amazon_nl_price: 38.7816 - amazon_it_currency: EUR - amazon_it_price: 38.7816 - amazon_se_curency: SEK - amazon_se_price: 391.248 - amazon_product_id: 8606015075686 - amazon_product_id_type: EAN - amazon_update: Update - amazon_short_description: Put together different Click Boards™ and invent fully functional standalone gadgets with utmost ease using the Click Board™er 2 for STM32. This Click Board™er 2 board is a fast and compact Click Board™ two seater equipped with STM32F407VGT6 32-bit ARM Cortex-M4 microcontroller and two MikroBUS host sockets to provide user with unlimited possibilities to come up with new and original inventions.The microcontroller is preprogrammed with a fast USB HID MikroBootloader. However, programming the microcontroller can be also done using an external MikroProg for STM32 programmer and MikroProg Suite for ARM software, or using the ST-LINK V2 programmer and MikroProg Suite for ARM software. It comes with an on-board LTC3586-2 power management and battery charger IC that provides an independent, steady power supply to the microcontrollers RTC from the li-polymer battery or USB even when the user push the reset button or toggle the On/Off switch.This pocket-sized board features the same pair of 1x26 connection pads as mikroMedia™ boards. The MikroBUS host connectors consist of two 1'. - amazon_long_description:

STM32F407VGT6 Microcontroller

The Clicker 2 for STM32 development tool features STM32F407VGT6 microcontroller featuring various on-chip peripherals. This 32-bit ARM Cortex-M4 MCU operates at up to 168 MHz, has 1 MB of flash and 192+4KB of SRAM. It is also provided with USB 2.0 support.

Programming the Microcontroller

The microcontroller used can be programmed in three ways: Using USB HID mikroBootloader; using external mikroProg for STM32 programmer; using external ST-LINK V2 programmer.

LTC 3586-2 Power Management and Battery Charger

A highly integrated power management and battery charger IC, LTC3586-2, comes with a current limited switching PowerPath manager. It allows charging of a connected battery through USB by turning the USB port into a charger and can provide an independent power supply to the MCU's real-time clock, even when the board's power switch is off.

- amazon_main_image: https://www.thedebugstore.com/images/product/lg-mikroe-clicker-2-stm32.jpg - amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-mikroe-clicker-2-stm32.jpg - amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-mikroe-clicker-2-stm32.jpg - amazon_browse_node: 428655031 - related_products: MIKROE-1100,MIKROE-2547 - mpn: MIKROE-1685 - backorder_label: If no stock shown above, check availability - google_product_category: 2082 - condition: new - custom_product: false - mpn: MIKROE-1685 - google_product_category: Electronics - custom_label_0: Clicker Board - attachments: [{"download_file":[{"download_file":"Clicker Board 2 for STM32 User Manual"}],"download_filetype":[{"download_filetype":"pdf"}]}] - myordercount: {"ordercount":1,"recentcount":1} - device_vendor: STMicroelectronics - device_type: STM32F407VGT6 - warranty: 12 months - brand: MikroE - manufacturer: Mikroelektronika d.o.o. - badge: - widget:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
- brands: gid://shopify/Metaobject/56256004319 - customhs_code: 847180 - detailed_description: {"type":"root","children":[{"type":"heading","level":2,"children":[{"type":"text","value":"Technical Specifications"}]},{"type":"paragraph","children":[{"type":"text","value":"Thousands of possibilities with click boards.","bold":true},{"type":"text","value":" With two mikroBUS™ sockets on clicker 2, you can take advantage of the huge potential of click™ boards, the constantly expanding range of over 1000 add-on boards. Blend different functionalities together and come up with new and original inventions. That's just two clicks and your project is halfway done. Go ahead and play with a few ideas right away."}]},{"type":"paragraph","children":[{"type":"text","value":"Programming.","bold":true},{"type":"text","value":"To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a "},{"type":"text","value":"USB HID bootloader","bold":true},{"type":"text","value":". Just download our mikroBootloader application and you're ready to upload your firmware. On-board "},{"type":"text","value":"mikroProg for STM32","bold":true},{"type":"text","value":" connector enables programming through external programmer/debugger."}]},{"type":"paragraph","children":[{"type":"text","value":"Power Management.","bold":true},{"type":"text","value":"Clicker 2 for STM32 features LTC®3586, a highly integrated power management and battery charger IC that includes a current-limited switching PowerPath manager. LTC®3586 also enables battery charging over a USB connection. You can supply power to the board with a micro USB cable provided in the package. On-board voltage regulators provide the appropriate voltage levels to each component on the board."}]},{"type":"heading","level":2,"children":[{"type":"text","value":"Powering Your Inventions"}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"Focus on your main idea","bold":true},{"type":"text","value":" because clicker 2 will take care of the details for you: your prototype already has a power management system in place. The onboard LTC®3586-2 IC will provide 3.3V or 5V to the clicks. It turns the USB port into a charger for the li-po battery. It can also maintain an independent power supply to the MCU's RTC even when you push the RESET button or toggle the ON/OFF switch."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Processor"}]},{"type":"paragraph","children":[{"type":"text","value":"- STM32F407VGT6 (ARM Cortex-M4)"},{"type":"text","value":""},{"type":"text","value":"- 1024kB Flash, 192kB RAM"},{"type":"text","value":""},{"type":"text","value":"- 168MHz operation"}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Connectivity"}]},{"type":"paragraph","children":[{"type":"text","value":"- 52 programmable GPIOs"},{"type":"text","value":""},{"type":"text","value":"- 2 mikroBUS host sockets"},{"type":"text","value":""},{"type":"text","value":"- USB MINI-B connector"}]},{"type":"heading","level":2,"children":[{"type":"text","value":"Expanding Your Ideas"}]},{"type":"paragraph","children":[{"type":"text","value":"No idea is too big for clicker 2. Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"heading","level":2,"children":[{"type":"text","value":"HID Bootloader Inside"}]},{"type":"paragraph","children":[{"type":"text","value":"To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"heading","level":2,"children":[{"type":"text","value":"Hardware Debugging"}]},{"type":"paragraph","children":[{"type":"text","value":"Efficiently erradicate any bugs and iron out your code until it's wrinkle free and your clicker 2 device works perfectly—use mikroProg™ for STM32®. It's a fast hardware debugger and programmer with outstanding performance. Especially when used together with our ARM® compilers."}]},{"type":"paragraph","children":[{"type":"text","value":""}]},{"type":"heading","level":2,"children":[{"type":"text","value":"HID Bootloader Inside"}]},{"type":"paragraph","children":[{"type":"text","value":"To make your prototyping experience as convenient as possible, clicker 2 for STM32 is preprogrammed with a USB-HID bootloader. Just download our mikroBootloader application and you're ready to upload your firmware."}]},{"type":"paragraph","children":[{"type":"text","value":" "}]}]} - summary:

Put together different Click Boards™ and invent fully-functional standalone gadgets with utmost ease using the Clicker 2 Board™ for STM32. This Clicker 2 Board™ board is a fast and compact Click Board™ two-seater equipped with STM32F407VGT6 32-bit ARM Cortex-M4 microcontroller and two MikroBUS host sockets to provide the user with unlimited possibilities to come up with new and original inventions.

The microcontroller is preprogrammed with a fast USB HID MikroBootloader. However, programming the microcontroller can be also done using an external MikroProg for STM32 programmer and MikroProg Suite for ARM software, or using the ST-LINK V2 programmer and MikroProg Suite for ARM software. It comes with onboard LTC3586-2 power management and battery charger IC that provides an independent, steady power supply to the microcontrollers RTC from the li-polymer battery or USB even when the user pushes the reset button or toggle the On/Off switch.

This pocket-sized board features the same pair of 1x26 connection pads as mikroMedia™ boards. The MikroBUS host connectors consist of two 1'.