# Title: IrThermo Click Board™ 5V ## Description: The IrThermo 5V Click Board™ is a contactless temperature measurement device that relies on the accurate thermopile sensor chip, which encompasses both the thermopile sensor element and the ASSP. The ASSP - signal conditioning circuitry features 17bit ADC and powerful DSP which allow high degree of accuracy and wide temperature measurement range. The IrThermo click is equipped with both the 10bit PWM interface and the SMBus/I2C interface. Featuring high degree of integration, as well as great accuracy and a wide temperature measurement range, IrThermo click is perfectly suited for controlling the temperature of the elements which are out of reach for other measurement methods, such as some moving parts in the automotive industry, general purpose industry applications, air conditioning devices, and similar applications that require accurate temperature measurement in hard to reach places. How Does The IrThermo 5V Click Board™ Work? The main principle on which the IrThermo 5V Click Board™ relies, is the measurement of the temperature by the contactless IR sensor MLX90614, from Melexis. This sensor is an IR sensor of a thermopile character. A thermopile sensor is actually a serially connected thermocouple array, with hot junctions located on the heat absorbing membrane. The cold junctions are located on a cold base, providing the reference point for generating the voltage. Due to the low-temperature capacity of the membrane, it will react to the heat radiation, generating voltage via the thermoelectric effect. The ASSP circuitry of the MLX90614 sensor, processes the voltage, allowing the accuracy of ±0.5˚C. The MLX90614 sensor is factory calibrated in wide temperature range: -40°C to 125°C for sensor temperature and -70°C to 380°C for object temperature. The ASSP circuitry also provides advanced interfacing options for the MCU, with the CRC error checking. The MLX90614 is equipped with a portion of EEPROM, which is used to store various config parameters, calibration data, as well as the chip ID address. Changing the values in the EEPROM will not take effect until the device is restarted. The data can be read both from the SMBus interface and from the PWM. The SMBus interface is mainly compatible with the I2C interface, but there are some minor differences, which require attention while writing custom code. These differences are not specific to the used sensor. They originate from the slightly different design of those two protocols. More information about these differences can be found in the datasheet of the MLX90614 sensor. However, provided libraries contain functions that take care of the proper communication. There is also an example application which demonstrates the usability of these functions, which can be used as a reference for a custom project design. The I2C/SMBus lines of the IrThermo 5V Click Board™ are routed to the mikroBUS™ for an easy integration with the host MCU. These lines are pulled up to the VCC by the onboard resistors. The communication selection type between the PWM and the SMBus/I2C is done by switching the onboard SMD jumpers labelled as SELECT MODE. These jumpers should both be positioned either to select the PWM communication mode, or the I2C mode. No mixed positions are allowed. Also it should be noted that these two SMD jumpers are the only SMD jumpers that should be switched on the click board™. There are two types of the IrThermo Click Board™ available: IrThermo 3.3V Click Board™ and IrThermo 5V Click Board™. This is due to a fact that there are two different MLX90614 sensor versions, available for both 3.3V and 5V MCUs. The 3.3V version uses the MLX90614 ESF BAA sensor, while the 5V version uses the MLX90614 ESF AAA sensor. SPECIFICATIONS Type Temperature & humidity Applications The IrThermo 5V Click Board™ is ideal for automotive, industrial temperature control, movement detection, air conditioning control and more On-board modules MLX90614ESF-AAA single zone Infrared Thermometer Key Features 17-bit ADC powerful DSP unit and 10-bit PWM, configured to measure temperature in range of -40°C to 125°C, with the output resolution of 0.14°C Interface I2C,PWM,UART Compatibility mikroBUS Click board size S (28.6 x 25.4 mm) Input Voltage 3.3V PINOUT DIAGRAM This table shows how the pinout of the IrThermo 3.3V Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Notes Pin Pin Notes NC 1 AN PWM 16 PWM PWM data NC 2 RST INT 15 NC NC 3 CS TX 14 NC NC 4 SCK RX 13 NC NC 5 MISO SCL 12 SCL I2C clock NC 6 MOSI SDA 11 SDA I2C data Power supply +3.3V 7 3.3V 5V 10 NC Ground GND 8 GND GND 9 GND Ground ONBOARD SETTINGS AND INDICATORS Label Name Default Description LD1 PWR - Power LED indicator J2 I2C/PWM Right Select Mode communication with target MCU, right position for the I2C, left position for the PWM J3 I2C/PWM Right Select Mode communication with target MCU, right position for the I2C, left position for the PWM Software Support We provide a library for the IrThermo 5V Click Board™ on our Libstock page, as well as a demo application (example), developed using MikroElektronika compilers and mikroSDK. The provided click library is mikroSDK standard compliant. The demo application can run on all the main MikroElektronika development boards. Library Description Key functions: float irthrm3v3_getTambient() - Returns ambient temperature value in Celsius. float irthrm3v3_getTobject() - Returns object temperature value in Celsius. Examples Description The application is composed of three sections: System Initialization - Initialization of the I2C and UART modules. Application Initialization - Initialization of the IrThermo 3V3 Driver Application Task - Reading Ambient Temperature and displaying the value periodically. void applicationTask() { measuredTemperature = irthrm3v3_getTambient(); FloatToStr(measuredTemperature,text); mikrobus_logWrite("Ambient Temperature: ",_LOG_TEXT); mikrobus_logWrite(text,_LOG_LINE); Delay_ms(1000); } The full application code, and ready to use projects can be found on our Libstock page. Other mikroE Libraries used in the example: I2C UART Conversions Additional notes and information Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message. MIKROSDK The IrThermo 5V Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant click board demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using. ## Product type: Click Board ## Vendor: Mikroelektronika d.o.o. ## Tags: Click Board, Melexis, MikroE, Sense, Sensor, Temp&Hum, Temperature ## Price range: 49.7 - 49.7 GBP ## Link: https://thedebugstore.com/products/mikroe-1362-ir-thermo-click-board-5v-uk ## Compare-at price range: 71.0 - 71.0 GBP ## Options - Title: Default Title ## Collections - [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store) - [Mikroelektronika d.o.o. (MikroE)](https://thedebugstore.com/a/llms/collections/mikroelektronika-catalogue-uk) - [Melexis Device Support: Development Boards and Tools for Automotive Sensors and ICs](https://thedebugstore.com/a/llms/collections/devices-melexis) - [Sensor Click Boards™](https://thedebugstore.com/a/llms/collections/sensor-click-boards-catalogue) - [MikroE Click Boards™](https://thedebugstore.com/a/llms/collections/mikroe-click-boards-catalogue-uk) - [Temperature Sensor Click Boards™](https://thedebugstore.com/a/llms/collections/temperature-sensor-click-boards-catalogue) - [Click Boards™ Summer Sale](https://thedebugstore.com/a/llms/collections/inventory-sale) - [MikroE Sale](https://thedebugstore.com/a/llms/collections/mikroe-sale) - [MIKROE Stock](https://thedebugstore.com/a/llms/collections/mikroe-products-in-stock-sale) ## Variants - Default Title, SKU: MIKROE-1362, Available: yes, Inventory: 5 ## Metafields - full_description:

The IrThermo 5V Click Board™ is a contactless temperature measurement device that relies on the accurate thermopile sensor chip, which encompasses both the thermopile sensor element and the ASSP. The ASSP - signal conditioning circuitry features 17bit ADC and powerful DSP which allow high degree of accuracy and wide temperature measurement range. The IrThermo click is equipped with both the 10bit PWM interface and the SMBus/I2C interface.

Featuring high degree of integration, as well as great accuracy and a wide temperature measurement range, IrThermo click is perfectly suited for controlling the temperature of the elements which are out of reach for other measurement methods, such as some moving parts in the automotive industry, general purpose industry applications, air conditioning devices, and similar applications that require accurate temperature measurement in hard to reach places.

How Does The IrThermo 5V Click Board™ Work?

The main principle on which the IrThermo 5V Click Board™ relies, is the measurement of the temperature by the contactless IR sensor MLX90614, from Melexis. This sensor is an IR sensor of a thermopile character. A thermopile sensor is actually a serially connected thermocouple array, with hot junctions located on the heat absorbing membrane. The cold junctions are located on a cold base, providing the reference point for generating the voltage. Due to the low-temperature capacity of the membrane, it will react to the heat radiation, generating voltage via the thermoelectric effect. The ASSP circuitry of the MLX90614 sensor, processes the voltage, allowing the accuracy of ±0.5˚C. The MLX90614 sensor is factory calibrated in wide temperature range: -40°C to 125°C for sensor temperature and -70°C to 380°C for object temperature. The ASSP circuitry also provides advanced interfacing options for the MCU, with the CRC error checking.
IrThermo Click Board™ 5V

The MLX90614 is equipped with a portion of EEPROM, which is used to store various config parameters, calibration data, as well as the chip ID address. Changing the values in the EEPROM will not take effect until the device is restarted.

The data can be read both from the SMBus interface and from the PWM. The SMBus interface is mainly compatible with the I2C interface, but there are some minor differences, which require attention while writing custom code. These differences are not specific to the used sensor. They originate from the slightly different design of those two protocols. More information about these differences can be found in the datasheet of the MLX90614 sensor. However, provided libraries contain functions that take care of the proper communication. There is also an example application which demonstrates the usability of these functions, which can be used as a reference for a custom project design.

The I2C/SMBus lines of the IrThermo 5V Click Board™ are routed to the mikroBUS™ for an easy integration with the host MCU. These lines are pulled up to the VCC by the onboard resistors. The communication selection type between the PWM and the SMBus/I2C is done by switching the onboard SMD jumpers labelled as SELECT MODE. These jumpers should both be positioned either to select the PWM communication mode, or the I2C mode. No mixed positions are allowed. Also it should be noted that these two SMD jumpers are the only SMD jumpers that should be switched on the click board™.

There are two types of the IrThermo Click Board™ available: IrThermo 3.3V Click Board™ and IrThermo 5V Click Board™. This is due to a fact that there are two different MLX90614 sensor versions, available for both 3.3V and 5V MCUs. The 3.3V version uses the MLX90614 ESF BAA sensor, while the 5V version uses the MLX90614 ESF AAA sensor.

SPECIFICATIONS

Type Temperature & humidity
Applications The IrThermo 5V Click Board™ is ideal for automotive, industrial temperature control, movement detection, air conditioning control and more
On-board modules MLX90614ESF-AAA single zone Infrared Thermometer
Key Features 17-bit ADC powerful DSP unit and 10-bit PWM, configured to measure temperature in range of -40°C to 125°C, with the output resolution of 0.14°C
Interface I2C,PWM,UART
Compatibility mikroBUS
Click board size S (28.6 x 25.4 mm)
Input Voltage 3.3V

PINOUT DIAGRAM

This table shows how the pinout of the IrThermo 3.3V Click Board™ corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns).

Notes Pin Mikrobus logo.png Pin Notes
NC 1 AN PWM 16 PWM PWM data
NC 2 RST INT 15 NC
NC 3 CS TX 14 NC
NC 4 SCK RX 13 NC
NC 5 MISO SCL 12 SCL I2C clock
NC 6 MOSI SDA 11 SDA I2C data
Power supply +3.3V 7 3.3V 5V 10 NC
Ground GND 8 GND GND 9 GND Ground

ONBOARD SETTINGS AND INDICATORS

Label Name Default Description
LD1 PWR - Power LED indicator
J2 I2C/PWM Right Select Mode communication with target MCU, right position for the I2C, left position for the PWM
J3 I2C/PWM Right Select Mode communication with target MCU, right position for the I2C, left position for the PWM

Software Support

We provide a library for the IrThermo 5V Click Board™ on our Libstock page, as well as a demo application (example), developed using MikroElektronika compilers and mikroSDK. The provided click library is mikroSDK standard compliant. The demo application can run on all the main MikroElektronika development boards.

Library Description

Key functions:

Examples Description

The application is composed of three sections:

void applicationTask()
{
 measuredTemperature = irthrm3v3_getTambient();
 FloatToStr(measuredTemperature,text);
 mikrobus_logWrite("Ambient Temperature: ",_LOG_TEXT);
 mikrobus_logWrite(text,_LOG_LINE);
 Delay_ms(1000);
}

The full application code, and ready to use projects can be found on our Libstock page.

Other mikroE Libraries used in the example:

Additional notes and information

Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message.

MIKROSDK

The IrThermo 5V Click Board™ is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant click board demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using.

- description_tag: Introduce an Infrared (Ir) Thermometer to your design with the IrThermo Click Board™ from MikroE. This add-on board offers a compact and easy solution for non-contact temperature measurements. Available from Debug Store UK. - title_tag: MikroE IrThermo Click Board™ 5V (MIKROE-1362) - manufacturer: Mikroelektronika d.o.o. - warranty: 12 months - amazon_enable: TRUE - amazon_title: IrThermo Click Board 5V - amazon_product_type: computercomponent - amazon_block: FALSE - amazon_prime_enable: FALSE - amazon_search: MikroElektronika Microelectronica MIKROE-1100 - amazon_uk_price: 51.92 - amazon_uk_currency: GBP - amazon_de_currency: EUR - amazon_de_price: 58.6696 - amazon_fr_currency: EUR - amazon_fr_price: 58.6696 - amazon_es_currency: EUR - amazon_es_price: 58.6696 - amazon_nl_currency: EUR - amazon_nl_price: 58.6696 - amazon_it_currency: EUR - amazon_it_price: 58.6696 - amazon_se_curency: SEK - amazon_se_price: 591.888 - amazon_product_id: 8606015074207 - amazon_product_id_type: EAN - amazon_update: Update - amazon_short_description: Introduce an Infrared (Ir) Thermometer to your design with the IrThermo Click Board™ from MikroE. This add-on board offers a compact and easy solution for non-contact temperature measurements. This 5V version of the IrThermo Click Board™ features a Melexis MLX90614ESF-BAA single-zone infrared thermometer module that is configured to determine temperature in the range of -70 to +380 - amazon_long_description:

IC/Module: MLX90614ESF-BAA Infrared Thermometer Module

MLX90614ESF-BAA is a high accuracy, high resolution sensor that use infrared thermopile detectors to determine the temperature of objects without touching them physically. Simply position the sensor towards the object to measure and it will detect the temperature by absorbing IR waves emitted. With a 90-degree field of view, it can sense a wider range of temperatures than most digital sensors: from -70

- amazon_main_image: https://www.thedebugstore.com/images/product/lg-mikroe-click-ir-thermo-5_1.jpg - amazon_browse_node: 428655031 - related_products: MIKROE-2769 - mpn: MIKROE-1362 - backorder_label: If no stock shown above, check availability - condition: new - custom_product: false - mpn: MIKROE-1362 - google_product_category: Electronics - custom_label_0: Click Board - attachments: [{"download_file":[{"download_file":"IrThermo Click Board™ 5V Schematic"}],"download_filetype":[{"download_filetype":"pdf"}]},{"download_file":[{"download_file":"Melexis MLX90614ESF-AAA Infrared Thermometer Datasheet"}],"download_filetype":[{"download_filetype":"pdf"}]}] - device_vendor: Melexis Technologies NV - device_type: MLX90614ESF-AAA-000-TU - warranty: 12 months - brand: MikroE - manufacturer: Mikroelektronika d.o.o. - badge: - widget:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
- brands: gid://shopify/Metaobject/56256004319 - breadcrumbs: ["gid://shopify/Collection/447955239135","gid://shopify/Collection/241680580797","gid://shopify/Collection/241545969853"] - customhs_code: 847330 - detailed_description: {"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"IrThermo 5V Click Board™","bold":true,"italic":true},{"type":"text","value":" is a contactless temperature measurement device that relies on the accurate thermopile sensor chip, which encompasses both the thermopile sensor element and the ASSP. The ASSP - signal conditioning circuitry features 17bit ADC and powerful DSP which allow high degree of accuracy and wide temperature measurement range. The IrThermo click is equipped with both the 10bit PWM interface and the SMBus/I2C interface."}]},{"type":"paragraph","children":[{"type":"text","value":"Featuring high degree of integration, as well as great accuracy and a wide temperature measurement range, IrThermo click is perfectly suited for controlling the temperature of the elements which are out of reach for other measurement methods, such as some moving parts in the automotive industry, general purpose industry applications, air conditioning devices, and similar applications that require accurate temperature measurement in hard to reach places."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"How Does The IrThermo 5V Click Board™ Work?"}]},{"type":"paragraph","children":[{"type":"text","value":"The main principle on which the "},{"type":"text","value":"IrThermo 5V Click Board™","bold":true},{"type":"text","value":" relies, is the measurement of the temperature by the contactless IR sensor MLX90614, from Melexis. This sensor is an IR sensor of a thermopile character. A thermopile sensor is actually a serially connected thermocouple array, with hot junctions located on the heat absorbing membrane. The cold junctions are located on a cold base, providing the reference point for generating the voltage. Due to the low-temperature capacity of the membrane, it will react to the heat radiation, generating voltage via the thermoelectric effect. The ASSP circuitry of the MLX90614 sensor, processes the voltage, allowing the accuracy of ±0.5˚C. The MLX90614 sensor is factory calibrated in wide temperature range: -40°C to 125°C for sensor temperature and -70°C to 380°C for object temperature. The ASSP circuitry also provides advanced interfacing options for the MCU, with the CRC error checking."},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""}]},{"type":"paragraph","children":[{"type":"text","value":"The MLX90614 is equipped with a portion of EEPROM, which is used to store various config parameters, calibration data, as well as the chip ID address. Changing the values in the EEPROM will not take effect until the device is restarted."}]},{"type":"paragraph","children":[{"type":"text","value":"The data can be read both from the SMBus interface and from the PWM. The SMBus interface is mainly compatible with the I2C interface, but there are some minor differences, which require attention while writing custom code. These differences are not specific to the used sensor. They originate from the slightly different design of those two protocols. More information about these differences can be found in the datasheet of the MLX90614 sensor. However, provided libraries contain functions that take care of the proper communication. There is also an example application which demonstrates the usability of these functions, which can be used as a reference for a custom project design."}]},{"type":"paragraph","children":[{"type":"text","value":"The I2C/SMBus lines of the "},{"type":"text","value":"IrThermo 5V Click Board™","bold":true},{"type":"text","value":" are routed to the mikroBUS™ for an easy integration with the host MCU. These lines are pulled up to the VCC by the onboard resistors. The communication selection type between the PWM and the SMBus/I2C is done by switching the onboard SMD jumpers labelled as SELECT MODE. These jumpers should both be positioned either to select the PWM communication mode, or the I2C mode. No mixed positions are allowed. Also it should be noted that these two SMD jumpers are the only SMD jumpers that should be switched on the click board™."}]},{"type":"paragraph","children":[{"type":"text","value":"There are two types of the "},{"type":"text","value":"IrThermo Click Board™","bold":true},{"type":"text","value":" available: "},{"type":"text","value":"IrThermo 3.3V Click Board™","bold":true},{"type":"text","value":" and "},{"type":"text","value":"IrThermo 5V Click Board™","bold":true},{"type":"text","value":". This is due to a fact that there are two different MLX90614 sensor versions, available for both 3.3V and 5V MCUs. The 3.3V version uses the MLX90614 ESF BAA sensor, while the 5V version uses the MLX90614 ESF AAA sensor."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"SPECIFICATIONS"}]},{"type":"paragraph","children":[{"type":"text","value":"Type\nTemperature & humidity\nApplications\nThe IrThermo 5V Click Board™ is ideal for automotive, industrial temperature control, movement detection, air conditioning control and more\nOn-board modules\nMLX90614ESF-AAA single zone Infrared Thermometer\nKey Features\n17-bit ADC powerful DSP unit and 10-bit PWM, configured to measure temperature in range of -40°C to 125°C, with the output resolution of 0.14°C\nInterface\nI2C,PWM,UART\nCompatibility\nmikroBUS\nClick board size\nS (28.6 x 25.4 mm)\nInput Voltage\n3.3V"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"PINOUT DIAGRAM"}]},{"type":"paragraph","children":[{"type":"text","value":"This table shows how the pinout of the "},{"type":"text","value":"IrThermo 3.3V Click Board™","bold":true},{"type":"text","value":" corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns)."}]},{"type":"paragraph","children":[{"type":"text","value":"Notes\nPin\nPin\nNotes\nNC\n1\nAN\nPWM\n16\nPWM\nPWM data\nNC\n2\nRST\nINT\n15\nNC\nNC\n3\nCS\nTX\n14\nNC\nNC\n4\nSCK\nRX\n13\nNC\nNC\n5\nMISO\nSCL\n12\nSCL\nI2C clock\nNC\n6\nMOSI\nSDA\n11\nSDA\nI2C data\nPower supply\n+3.3V\n7\n3.3V\n5V\n10\nNC\nGround\nGND\n8\nGND\nGND\n9\nGND\nGround"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"ONBOARD SETTINGS AND INDICATORS"}]},{"type":"paragraph","children":[{"type":"text","value":"Label\nName\nDefault\nDescription\nLD1\nPWR\n-\nPower LED indicator\nJ2\nI2C/PWM\nRight\nSelect Mode communication with target MCU, right position for the I2C, left position for the PWM\nJ3\nI2C/PWM\nRight\nSelect Mode communication with target MCU, right position for the I2C, left position for the PWM"}]},{"type":"heading","level":3,"children":[{"type":"text","value":"Software Support"}]},{"type":"paragraph","children":[{"type":"text","value":"We provide a library for the "},{"type":"text","value":"IrThermo 5V Click Board™","bold":true},{"type":"text","value":" on our Libstock page, as well as a demo application (example), developed using MikroElektronika compilers and mikroSDK. The provided click library is mikroSDK standard compliant. The demo application can run on all the main MikroElektronika development boards."}]},{"type":"paragraph","children":[{"type":"text","value":"Library Description","bold":true}]},{"type":"paragraph","children":[{"type":"text","value":"Key functions:","bold":true}]},{"type":"list","listType":"unordered","children":[{"type":"list-item","children":[{"type":"text","value":"float irthrm3v3_getTambient()"},{"type":"text","value":" - Returns ambient temperature value in Celsius."}]},{"type":"list-item","children":[{"type":"text","value":"float irthrm3v3_getTobject()"},{"type":"text","value":" - Returns object temperature value in Celsius."}]}]},{"type":"paragraph","children":[{"type":"text","value":"Examples Description","bold":true},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":""},{"type":"text","value":"The application is composed of three sections:"}]},{"type":"list","listType":"unordered","children":[{"type":"list-item","children":[{"type":"text","value":"System Initialization - Initialization of the I2C and UART modules."}]},{"type":"list-item","children":[{"type":"text","value":"Application Initialization - Initialization of the IrThermo 3V3 Driver"}]},{"type":"list-item","children":[{"type":"text","value":"Application Task - Reading Ambient Temperature and displaying the value periodically."}]}]},{"type":"paragraph","children":[{"type":"text","value":"void applicationTask()\n{\n measuredTemperature = irthrm3v3_getTambient();\n FloatToStr(measuredTemperature,text);\n mikrobus_logWrite(\"Ambient Temperature: \",_LOG_TEXT);\n mikrobus_logWrite(text,_LOG_LINE);\n Delay_ms(1000);\n}"}]},{"type":"paragraph","children":[{"type":"text","value":"The full application code, and ready to use projects can be found on our Libstock page."}]},{"type":"paragraph","children":[{"type":"text","value":"Other mikroE Libraries used in the example:"}]},{"type":"list","listType":"unordered","children":[{"type":"list-item","children":[{"type":"text","value":"I2C"}]},{"type":"list-item","children":[{"type":"text","value":"UART"}]},{"type":"list-item","children":[{"type":"text","value":"Conversions"}]}]},{"type":"paragraph","children":[{"type":"text","value":"Additional notes and information","bold":true}]},{"type":"paragraph","children":[{"type":"text","value":"Depending on the development board you are using, you may need a USB UART click, USB UART 2 click or RS232 click to connect to your PC, for development systems with no UART to USB interface available on the board. The terminal available in all MikroElektronika compilers, or any other terminal application of your choice, can be used to read the message."}]},{"type":"heading","level":3,"children":[{"type":"text","value":"MIKROSDK"}]},{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"IrThermo 5V Click Board™","bold":true},{"type":"text","value":" is supported with mikroSDK - MikroElektronika Software Development Kit. To ensure proper operation of mikroSDK compliant click board demo applications, mikroSDK should be downloaded from the LibStock and installed for the compiler you are using."}]}]} - summary:

Introduce an Infrared (Ir) Thermometer to your design with the IrThermo Click Board™ from MikroE. This add-on board offers a compact and easy solution for non-contact temperature measurements.

This 5V version of the IrThermo Click Board™ features a Melexis MLX90614ESF-AAA single-zone infrared thermometer module that is configured to determine the temperature in the range of -70 to +380