# Title: Hantek 2D72 2-ch, 70MHz Scope/DMM/Waveform Generator ## Description: Specifications Model Hantek-2D72 Hantek-2D42 Hantek-2C72 Hantek-2C42 Oscilloscope Bandwidth 70MHz 40MHz 70MHz 40MHz Channel 2CH+DMM+AWG 2CH+DMM+AWG 2CH+DMM 2CH+DMM Horizontal Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel) Waveform Interpolation (sin x)/x Record Length Max. 6K for single-channel; 3K samples per dual-channel SEC/DIV Range 5ns/div~500s/div 1, 2, 5 sequence Vertical A/D Converter 8-bit resolution,each channel sampled simultaneously VOLTS/DIV Range 10mV/div~10V/divat input BNC Bandwidth Limit, typical 20MHz Low Frequency Response (-3db) ≤10Hz at BNC Rise Time at BNC, typical ≤5ns DC Gain Accuracy ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div Note: Bandwidth reduced to 6MHz when using a 1X probe. Acquisition Acquisition Modes Normal Trigger Type Edge Mode Auto, Normal, single Level ±4 divisions from center of screen Trigger Level Accuracy 0.2div × volts/div within ±4 divisions from center of screen Slope Rising, Falling, Rising & Falling Source CH1/CH2 Input Coupling DC, AC or GND Input Impedance, 25pF±3 pF, 1MΩ±2% DC coupled Probe Attenuation 1X, 10X Supported Probe Attenuation Factors 1X, 10X, 100X, 1000X Maximum Input Voltage 150VRMS Measurement Cursor Voltage difference between cursors: △V Time difference between cursors: △T Automatic Measurements Frequency, Amplitude Arbitrary Waveform Generator Waveform Frequency Sine: 1Hz~25MHz - - Square: 1Hz~10MHz - - Ramp: 1Hz~1MHz - - EXP: 1Hz~5MHz - - Sampling 250MSa/s - - Amplitude 2.5Vpp(50Ω) - - 5Vpp(High impedance) - - Frequency Resolution 0.10% - - Channel 1CH waveform output - - Waveform Depth 512Sa - - Vertical Resolution 12 bit - - Output Impedance 50 Ω - - Multimeter Maximum Resolution 4000 Counts DMM Testing Modes Voltage,Current,Resistance,Capacitance,Diode &On-Off Maximum Input Voltage AC:600V, DC: 600V Maximum Input Current AC: 10A, DC:10A Input Impedance 10MΩ Measurement Term Range Accuracy Resolution DC Voltage 400.00mV ± (0.8% + 5) 100uV 4.000V 1mV 40.00V 10mV 400.0V 100mV 600.0V ± (1% + 2) 1V Overload protection: 400mV: 250V, other: 600Vrms. AC Voltage 4.000V ± (1.2% + 5) 1mV 40.00V 10mV 400.0V 100mV 600.0V ±(1.5% + 5) 1V Frequency: 40Hz~400Hz; Frequency of 400V and 600V: 40Hz~100Hz DC Current 40.00mA ± (1% + 2) 10uA 200.0mA ± (1.5% + 2) 100uA 4.000A ± (1.8% + 2) 1mA 10.00A ± (3% + 2) 10mA Overload protection: self restoring fuse: 200mA/250V, 4A and 10A range no fuse. AC Current 40.00mA ± (1.3% + 2) 10uA 400.0mA ± (1.8% + 2) 100uA 4.000A ± (2% + 3) 1mA 10.00A ± (3% + 5) 10mA Frequency: 40Hz~400Hz; self restoring fuse: 200mA/250V, 4A and 10A range no fuse. Resistance 400.0Ω ±(1% + 3) 0.1Ω 4.000KΩ ±(1.2% + 5) 1Ω 60.00KΩ 10Ω 400.0KΩ 100Ω 4.000MΩ 1KΩ 40.00MΩ ± (1.5%±3) 10KΩ Overload protection: 220Vrms Capacitance 40.00nF ±(3% + 5) 10pF 400.0nF 100pF 4.000uF 1nF 40.00uF 10nF 100.0uF 100nF Overload protection: 220Vrms Diode 0V~1.0V On-Off <50Ω General Specification Display Display Type 2.8 inch64K color TFT Display Resolution 320 horizontal by 240 vertical pixels Display Contrast Adjustable Power Supply Supply Voltage 100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A Power Consumption <2.5W Fuse T, 3A Battery 2600mA*2 Environmental Operating Temperature 0~50 °C (32~122 °F) Storage Temperature -40~+71 °C (-40~159.8 °F) Humidity ≤+104℉(≤+40°C): ≤90% relative humidity 106℉~122℉ (+41°C ~50°C): ≤60% relative humidity Cooling Method Convection Altitude Operating and 3,000m (10,000 feet) Nonoperating Mechanical Shock Random Vibration 0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis Nonoperating 2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis Operating 50g, 11ms, half sine Mechanical Dimension 199 x 98x 40mm (L x W x H) Weight 624g Standard Accessories Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 ## Product type: Oscilloscope ## Vendor: Hantek Electronic Co Ltd ## Tags: Automotive, hand held, Hantek, hantek-electronic-co-ltd, Meter, Multifunction, Oscilloscope, Resistance ## Price range: 185.0 - 185.0 GBP ## Link: https://thedebugstore.com/products/hantek-2d72-oscilloscope-multimeter-uk ## Options - Title: Default Title ## Collections - [New Products](https://thedebugstore.com/a/llms/collections/new-products-debug-store) - [Oscilloscopes](https://thedebugstore.com/a/llms/collections/oscilloscopes-catalogue-uk) - [Hantek Electronic Co. Ltd](https://thedebugstore.com/a/llms/collections/hantek-electronic-catalogue) - [Automotive Test Instruments](https://thedebugstore.com/a/llms/collections/automotive-test-catalogue) - [Test Meters](https://thedebugstore.com/a/llms/collections/test-meters-catalogue) - [Test & Measurement](https://thedebugstore.com/a/llms/collections/test-measurement-catalogue) - [Hand Held Oscilloscopes](https://thedebugstore.com/a/llms/collections/hand-held-oscilloscopes-catalogue) - [Multifunction Oscilloscopes](https://thedebugstore.com/a/llms/collections/multifunction-oscilloscopes-catalogue) - [Automotive Oscilloscopes](https://thedebugstore.com/a/llms/collections/automotive-oscilloscopes-catalogue-uk) - [Resistance Meters](https://thedebugstore.com/a/llms/collections/resistance-meter-catalogue) ## Variants - Default Title, SKU: Hantek-2D72, Available: yes, Inventory: 2 ## Metafields - full_description:

Specifications

ModelHantek-2D72Hantek-2D42Hantek-2C72Hantek-2C42

Oscilloscope

Bandwidth70MHz40MHz70MHz40MHz
Channel2CH+DMM+AWG2CH+DMM+AWG2CH+DMM2CH+DMM

Horizontal

Sample Rate Range250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform Interpolation(sin x)/x
Record LengthMax. 6K for single-channel; 3K samples per dual-channel
SEC/DIV Range5ns/div~500s/div  1, 2, 5 sequence

Vertical

A/D Converter8-bit resolution,each channel sampled simultaneously
VOLTS/DIV Range10mV/div~10V/divat input BNC
Bandwidth Limit, typical20MHz
Low Frequency Response (-3db)≤10Hz at BNC
Rise Time at BNC, typical≤5ns
DC Gain Accuracy±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
Note: Bandwidth reduced to 6MHz when using a 1X probe.

Acquisition

Acquisition ModesNormal

Trigger

TypeEdge
ModeAuto, Normal, single
Level±4 divisions from center of screen
Trigger Level Accuracy0.2div × volts/div within ±4 divisions from center of screen   
SlopeRising, Falling, Rising & Falling
SourceCH1/CH2

Input

CouplingDC, AC or GND
Input Impedance, 25pF±3 pF, 1MΩ±2%
DC coupled
Probe Attenuation1X, 10X
Supported Probe Attenuation Factors1X, 10X, 100X, 1000X
Maximum Input Voltage150VRMS

Measurement

CursorVoltage difference between cursors: △V
Time difference between cursors: △T
Automatic MeasurementsFrequency, Amplitude

Arbitrary Waveform Generator

Waveform FrequencySine: 1Hz~25MHz          -          -
Square: 1Hz~10MHz          -          -
Ramp: 1Hz~1MHz          -          -
EXP: 1Hz~5MHz          -          -
Sampling250MSa/s          -          -
Amplitude2.5Vpp(50Ω)          -          -
5Vpp(High impedance)          -          -
Frequency Resolution0.10%          -          -
Channel1CH waveform output          -          -
Waveform Depth512Sa          -          -
Vertical Resolution12 bit          -          -
Output Impedance50 Ω          -          -

Multimeter

Maximum Resolution4000 Counts
DMM Testing ModesVoltage,Current,Resistance,Capacitance,Diode &On-Off
Maximum Input VoltageAC:600V, DC: 600V
Maximum Input CurrentAC: 10A, DC:10A
Input Impedance10MΩ
Measurement TermRangeAccuracyResolution
DC Voltage400.00mV± (0.8% + 5)100uV
4.000V1mV
40.00V10mV
400.0V100mV
600.0V± (1% + 2)1V
Overload protection: 400mV: 250V, other: 600Vrms.
AC Voltage4.000V± (1.2% + 5)1mV
40.00V10mV
400.0V100mV
600.0V±(1.5% + 5)1V
Frequency: 40Hz~400Hz;
Frequency of 400V and 600V: 40Hz~100Hz
DC Current40.00mA± (1% + 2)10uA
200.0mA± (1.5% + 2)100uA
4.000A± (1.8% + 2)1mA
10.00A± (3% + 2)10mA
Overload protection: 
self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
AC Current40.00mA± (1.3% + 2)10uA
400.0mA± (1.8% + 2)100uA
4.000A± (2% + 3)1mA
10.00A± (3% + 5)10mA
Frequency: 40Hz~400Hz;
self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
Resistance400.0Ω±(1% + 3)0.1Ω
4.000KΩ±(1.2% + 5)1Ω
60.00KΩ10Ω
400.0KΩ100Ω
4.000MΩ1KΩ
40.00MΩ± (1.5%±3)10KΩ
Overload protection: 220Vrms
Capacitance40.00nF±(3% + 5)10pF
400.0nF100pF
4.000uF1nF
40.00uF10nF
100.0uF100nF
Overload protection: 220Vrms
Diode0V~1.0V
On-Off<50Ω

General Specification

Display

Display Type2.8 inch64K color TFT
Display Resolution320 horizontal by 240 vertical pixels
Display ContrastAdjustable

Power Supply

Supply Voltage100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
Power Consumption<2.5W
FuseT, 3A
Battery2600mA*2

Environmental

Operating Temperature0~50 °C (32~122 °F)
Storage Temperature-40~+71 °C (-40~159.8 °F)
Humidity≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling MethodConvection
AltitudeOperating and3,000m (10,000 feet)
Nonoperating
Mechanical ShockRandom Vibration0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis
Nonoperating2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis
Operating50g, 11ms, half sine

Mechanical

Dimension199 x 98x 40mm (L x W x H)
Weight624g
Standard AccessoriesProbe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1
- description_tag: The Hantek 2D72 is a two-channel, 70MHz bandwidth, portable oscilloscope with a built-in four-digit Digital Multimeter and Waveform Generator. Available from Debug Store UK. - title_tag: Hantek 2D72 2-ch, 70MHz Scope/DMM/SigGen - manufacturer: Hantek Electronic Co Ltd - warranty: 12 months - amazon_enable: TRUE - amazon_title: Hantek 2D72 2-ch, 70MHz Oscilloscope - amazon_product_type: computercomponent - amazon_block: FALSE - amazon_prime_enable: TRUE - amazon_search: Hantek - amazon_uk_price: 214.5 - amazon_uk_currency: GBP - amazon_de_currency: EUR - amazon_de_price: 242.385 - amazon_fr_currency: EUR - amazon_fr_price: 242.385 - amazon_es_currency: EUR - amazon_es_price: 242.385 - amazon_nl_currency: EUR - amazon_nl_price: 242.385 - amazon_it_currency: EUR - amazon_it_price: 242.385 - amazon_se_curency: SEK - amazon_se_price: 2445.3 - amazon_product_id: 5055383629725 - amazon_product_id_type: EAN - amazon_update: Update - amazon_short_description: SpecificationsModelHantek-2D72Hantek-2D42Hantek-2C72Hantek-2C42OscilloscopeBandwidth70MHz40MHz70MHz40MHzChannel2CH+DMM+AWG2CH+DMM+AWG2CH+DMM2CH+DMMHorizontalSample Rate Range250MSa/s(Single-channel), 125MSa/s(Dual-channel)Waveform Interpolation(sin x)/xRecord LengthMax. 6K for single-channel; 3K samples per dual-channelSEC/DIV Range5ns/div~500s/div  1, 2, 5 sequenceVerticalA/D Converter8-bit resolution,each channel sampled simultaneouslyVOLTS/DIV Range10mV/div~10V/divat input BNCBandwidth Limit, typical20MHzLow Frequency Response (-3db)≤10Hz at BNCRise Time at BNC, typical≤5nsDC Gain Accuracy±3% for Normal or Average acquisition mode, 10V/div to 10mV/divNote: Bandwidth reduced to 6MHz when using a 1X probe.AcquisitionAcquisition ModesNormalTriggerTypeEdgeModeAuto, Normal, singleLevel±4 divisions from center of screenTrigger Level Accuracy0.2div × volts/div within ±4 divisions from center of screen   SlopeRising, Falling, Rising & FallingSourceCH1/CH2InputCouplingDC, AC or GNDInput Impedance, 25pF±3 pF, 1MΩ±2%DC coupledProbe Attenuation1X, 10XSupported Probe Attenuation Factors1X, 10X, 100X, 1000XMaximum Input Voltage150VRMSMeasurementCursorVoltage difference between cursors: △VTime difference between cursors: △TAutomatic MeasurementsFrequency, AmplitudeArbitrary Waveform GeneratorWaveform FrequencySine: 1Hz~25MHz          -          -Square: 1Hz~10MHz          -          -Ramp: 1Hz~1MHz          -          -EXP: 1Hz~5MHz          -          -Sampling250MSa/s          -          -Amplitude2.5Vpp(50Ω)          -          -5Vpp(High impedance)          -          -Frequency Resolution0.10%          -          -Channel1CH waveform output          -          -Waveform Depth512Sa          -          -Vertical Resolution12 bit          -          -Output Impedance50 Ω          -          -MultimeterMaximum Resolution4000 CountsDMM Testing ModesVoltage,Current,Resistance,Capacitance,Diode &On-OffMaximum Input VoltageAC:600V, DC: 600VMaximum Input CurrentAC: 10A, DC:10AInput Impedance10MΩMeasurement TermRangeAccuracyResolutionDC Voltage400.00mV± (0.8% + 5)100uV4.000V1mV40.00V10mV400.0V100mV600.0V± (1% + 2)1VOverload protection: 400mV: 250V, other: 600Vrms.AC Voltage4.000V± (1.2% + 5)1mV40.00V10mV400.0V100mV600.0V±(1.5% + 5)1VFrequency: 40Hz~400Hz;Frequency of 400V and 600V: 40Hz~100HzDC Current40.00mA± (1% + 2)10uA200.0mA± (1.5% + 2)100uA4.000A± (1.8% + 2)1mA10.00A± (3% + 2)10mAOverload protection: self restoring fuse: 200mA/250V, 4A and 10A range no fuse.AC Current40.00mA± (1.3% + 2)10uA400.0mA± (1.8% + 2)100uA4.000A± (2% + 3)1mA10.00A± (3% + 5)10mAFrequency: 40Hz~400Hz;self restoring fuse: 200mA/250V, 4A and 10A range no fuse.Resistance400.0Ω±(1% + 3)0.1Ω4.000KΩ±(1.2% + 5)1Ω60.00KΩ10Ω400.0KΩ100Ω4.000MΩ1KΩ40.00MΩ± (1.5%±3)10KΩOverload protection: 220VrmsCapacitance40.00nF±(3% + 5)10pF400.0nF100pF4.000uF1nF40.00uF10nF100.0uF100nFOverload protection: 220VrmsDiode0V~1.0VOn-OffGeneral SpecificationDisplayDisplay Type2.8 inch64K color TFTDisplay Resolution320 horizontal by 240 vertical pixelsDisplay ContrastAdjustablePower SupplySupply Voltage100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2APower ConsumptionFuseT, 3ABattery2600mA*2EnvironmentalOperating Temperature0~50 °C (32~122 °F)Storage Temperature-40~+71 °C (-40~159.8 °F)Humidity≤+104℉(≤+40°C): ≤90% relative humidity106℉~122℉ (+41°C ~50°C): ≤60% relative humidityCooling MethodConvectionAltitudeOperating and3,000m (10,000 feet)NonoperatingMechanical ShockRandom Vibration0.31gRMS from 50Hz to 500Hz, 10 minutes on each axisNonoperating2.46gRMS from 5Hz to 500Hz, 10 minutes on each axisOperating50g, 11ms, half sineMechanicalDimension199 x 98x 40mm (L x W x H)Weight624gStandard AccessoriesProbe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1 - amazon_long_description:

Specifications

ModelHantek-2D72Hantek-2D42Hantek-2C72Hantek-2C42

Oscilloscope

Bandwidth70MHz40MHz70MHz40MHz
Channel2CH+DMM+AWG2CH+DMM+AWG2CH+DMM2CH+DMM

Horizontal

Sample Rate Range250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform Interpolation(sin x)/x
Record LengthMax. 6K for single-channel; 3K samples per dual-channel
SEC/DIV Range5ns/div~500s/div  1, 2, 5 sequence

Vertical

A/D Converter8-bit resolution,each channel sampled simultaneously
VOLTS/DIV Range10mV/div~10V/divat input BNC
Bandwidth Limit, typical20MHz
Low Frequency Response (-3db)≤10Hz at BNC
Rise Time at BNC, typical≤5ns
DC Gain Accuracy±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
Note: Bandwidth reduced to 6MHz when using a 1X probe.

Acquisition

Acquisition ModesNormal

Trigger

TypeEdge
ModeAuto, Normal, single
Level±4 divisions from center of screen
Trigger Level Accuracy0.2div × volts/div within ±4 divisions from center of screen   
SlopeRising, Falling, Rising & Falling
SourceCH1/CH2

Input

CouplingDC, AC or GND
Input Impedance, 25pF±3 pF, 1MΩ±2%
DC coupled
Probe Attenuation1X, 10X
Supported Probe Attenuation Factors1X, 10X, 100X, 1000X
Maximum Input Voltage150VRMS

Measurement

CursorVoltage difference between cursors: △V
Time difference between cursors: △T
Automatic MeasurementsFrequency, Amplitude

Arbitrary Waveform Generator

Waveform FrequencySine: 1Hz~25MHz          -          -
Square: 1Hz~10MHz          -          -
Ramp: 1Hz~1MHz          -          -
EXP: 1Hz~5MHz          -          -
Sampling250MSa/s          -          -
Amplitude2.5Vpp(50Ω)          -          -
5Vpp(High impedance)          -          -
Frequency Resolution0.10%          -          -
Channel1CH waveform output          -          -
Waveform Depth512Sa          -          -
Vertical Resolution12 bit          -          -
Output Impedance50 Ω          -          -

Multimeter

Maximum Resolution4000 Counts
DMM Testing ModesVoltage,Current,Resistance,Capacitance,Diode &On-Off
Maximum Input VoltageAC:600V, DC: 600V
Maximum Input CurrentAC: 10A, DC:10A
Input Impedance10MΩ
Measurement TermRangeAccuracyResolution
DC Voltage400.00mV± (0.8% + 5)100uV
4.000V1mV
40.00V10mV
400.0V100mV
600.0V± (1% + 2)1V
Overload protection: 400mV: 250V, other: 600Vrms.
AC Voltage4.000V± (1.2% + 5)1mV
40.00V10mV
400.0V100mV
600.0V±(1.5% + 5)1V
Frequency: 40Hz~400Hz;
Frequency of 400V and 600V: 40Hz~100Hz
DC Current40.00mA± (1% + 2)10uA
200.0mA± (1.5% + 2)100uA
4.000A± (1.8% + 2)1mA
10.00A± (3% + 2)10mA
Overload protection: 
self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
AC Current40.00mA± (1.3% + 2)10uA
400.0mA± (1.8% + 2)100uA
4.000A± (2% + 3)1mA
10.00A± (3% + 5)10mA
Frequency: 40Hz~400Hz;
self restoring fuse: 200mA/250V, 4A and 10A range no fuse.
Resistance400.0Ω±(1% + 3)0.1Ω
4.000KΩ±(1.2% + 5)1Ω
60.00KΩ10Ω
400.0KΩ100Ω
4.000MΩ1KΩ
40.00MΩ± (1.5%±3)10KΩ
Overload protection: 220Vrms
Capacitance40.00nF±(3% + 5)10pF
400.0nF100pF
4.000uF1nF
40.00uF10nF
100.0uF100nF
Overload protection: 220Vrms
Diode0V~1.0V
On-Off<50Ω

General Specification

Display

Display Type2.8 inch64K color TFT
Display Resolution320 horizontal by 240 vertical pixels
Display ContrastAdjustable

Power Supply

Supply Voltage100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
Power Consumption<2.5W
FuseT, 3A
Battery2600mA*2

Environmental

Operating Temperature0~50 °C (32~122 °F)
Storage Temperature-40~+71 °C (-40~159.8 °F)
Humidity≤+104℉(≤+40°C): ≤90% relative humidity
106℉~122℉ (+41°C ~50°C): ≤60% relative humidity
Cooling MethodConvection
AltitudeOperating and3,000m (10,000 feet)
Nonoperating
Mechanical ShockRandom Vibration0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis
Nonoperating2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis
Operating50g, 11ms, half sine

Mechanical

Dimension199 x 98x 40mm (L x W x H)
Weight624g
Standard AccessoriesProbe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1Probe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1
- amazon_main_image: https://www.thedebugstore.com/images/product/lg-hantek-2d72-front_2.jpg - amazon_other_image_1: https://www.thedebugstore.com/images/product/lg-hantek-2d72-angle_3.jpg - amazon_other_image_2: https://www.thedebugstore.com/images/product/lg-hantek-2d72-back_2.jpg - amazon_other_image_3: https://www.thedebugstore.com/images/product/lg-hantek-2d72-top_3.jpg - amazon_other_image_4: https://www.thedebugstore.com/images/product/lg-hantek-2d72-kit_1.jpg - amazon_other_image_5: https://www.thedebugstore.com/images/product/lg-hantek-2d72-kit_1.jpg - amazon_browse_node: 428655031 - mpn: Hantek-2D72 - backorder_label: If no stock is shown above, order now and we'll ship within 10 working days. - attachment_url_1: https://www.thedebugstore.com/files/attachments/13175/user-manual-hantek-2000-series-handheld-scopemeter-v1.1.pdf - attachment_title_1: Hantek-2D72 Oscilloscope User Manual - google_product_category: 288 - custom_label_1: Scope - condition: new - custom_product: false - mpn: Hantek-2D72 - google_product_category: Electronics - custom_label_0: Oscilloscope - warranty: 12 months - brand: Hantek - key_feature_1: with Multimeter and Waveform Generator - manufacturer: Hantek Electronic Co Ltd - badge: - widget:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
- brands: gid://shopify/Metaobject/56254759135 - breadcrumbs: ["gid://shopify/Collection/267180835005","gid://shopify/Collection/240413933757"] - customhs_code: 903040 - number_of_channels: 2 - bandwidth: 70MHz - sample_rate: 250MSa/s - storage_depth: 6K Samples - country_of_origin: china - touchscreen: - - detailed_description: {"type":"root","children":[{"type":"heading","level":2,"children":[{"type":"text","value":"Specifications"}]},{"type":"paragraph","children":[{"type":"text","value":"Model\nHantek-2D72\nHantek-2D42\nHantek-2C72\nHantek-2C42\nOscilloscope\nBandwidth\n70MHz\n40MHz\n70MHz\n40MHz\nChannel\n2CH+DMM+AWG\n2CH+DMM+AWG\n2CH+DMM\n2CH+DMM\nHorizontal\nSample Rate Range\n250MSa/s(Single-channel), 125MSa/s(Dual-channel)\nWaveform Interpolation\n(sin x)/x\nRecord Length\nMax. 6K for single-channel; 3K samples per dual-channel\nSEC/DIV Range\n5ns/div~500s/div  1, 2, 5 sequence\nVertical\nA/D Converter\n8-bit resolution,each channel sampled simultaneously\nVOLTS/DIV Range\n10mV/div~10V/divat input BNC\nBandwidth Limit, typical\n20MHz\nLow Frequency Response (-3db)\n≤10Hz at BNC\nRise Time at BNC, typical\n≤5ns\nDC Gain Accuracy\n±3% for Normal or Average acquisition mode, 10V/div to 10mV/div\nNote: Bandwidth reduced to 6MHz when using a 1X probe.\nAcquisition\nAcquisition Modes\nNormal\nTrigger\nType\nEdge\nMode\nAuto, Normal, single\nLevel\n±4 divisions from center of screen\nTrigger Level Accuracy\n0.2div × volts/div within ±4 divisions from center of screen   \nSlope\nRising, Falling, Rising & Falling\nSource\nCH1/CH2\nInput\nCoupling\nDC, AC or GND\nInput Impedance, \n25pF±3 pF, 1MΩ±2%\nDC coupled\nProbe Attenuation\n1X, 10X\nSupported Probe Attenuation Factors\n1X, 10X, 100X, 1000X\nMaximum Input Voltage\n150VRMS\nMeasurement\nCursor\nVoltage difference between cursors: △V\nTime difference between cursors: △T\nAutomatic Measurements\nFrequency, Amplitude\nArbitrary Waveform Generator\nWaveform Frequency\nSine: 1Hz~25MHz\n          -\n          -\nSquare: 1Hz~10MHz\n          -\n          -\nRamp: 1Hz~1MHz\n          -\n          -\nEXP: 1Hz~5MHz\n          -\n          -\nSampling\n250MSa/s\n          -\n          -\nAmplitude\n2.5Vpp(50Ω)\n          -\n          -\n5Vpp(High impedance)\n          -\n          -\nFrequency Resolution\n0.10%\n          -\n          -\nChannel\n1CH waveform output\n          -\n          -\nWaveform Depth\n512Sa\n          -\n          -\nVertical Resolution\n12 bit\n          -\n          -\nOutput Impedance\n50 Ω\n          -\n          -\nMultimeter\nMaximum Resolution\n4000 Counts\nDMM Testing Modes\nVoltage,Current,Resistance,Capacitance,Diode &On-Off\nMaximum Input Voltage\nAC:600V, DC: 600V\nMaximum Input Current\nAC: 10A, DC:10A\nInput Impedance\n10MΩ\nMeasurement Term\nRange\nAccuracy\nResolution\nDC Voltage\n400.00mV\n± (0.8% + 5)\n100uV\n4.000V\n1mV\n40.00V\n10mV\n400.0V\n100mV\n600.0V\n± (1% + 2)\n1V\nOverload protection: 400mV: 250V, other: 600Vrms.\nAC Voltage\n4.000V\n± (1.2% + 5)\n1mV\n40.00V\n10mV\n400.0V\n100mV\n600.0V\n±(1.5% + 5)\n1V\nFrequency: 40Hz~400Hz;\nFrequency of 400V and 600V: 40Hz~100Hz\nDC Current\n40.00mA\n± (1% + 2)\n10uA\n200.0mA\n± (1.5% + 2)\n100uA\n4.000A\n± (1.8% + 2)\n1mA\n10.00A\n± (3% + 2)\n10mA\nOverload protection: \nself restoring fuse: 200mA/250V, 4A and 10A range no fuse.\nAC Current\n40.00mA\n± (1.3% + 2)\n10uA\n400.0mA\n± (1.8% + 2)\n100uA\n4.000A\n± (2% + 3)\n1mA\n10.00A\n± (3% + 5)\n10mA\nFrequency: 40Hz~400Hz;\nself restoring fuse: 200mA/250V, 4A and 10A range no fuse.\nResistance\n400.0Ω\n±(1% + 3)\n0.1Ω\n4.000KΩ\n±(1.2% + 5)\n1Ω\n60.00KΩ\n10Ω\n400.0KΩ\n100Ω\n4.000MΩ\n1KΩ\n40.00MΩ\n± (1.5%±3)\n10KΩ\nOverload protection: 220Vrms\nCapacitance\n40.00nF\n±(3% + 5)\n10pF\n400.0nF\n100pF\n4.000uF\n1nF\n40.00uF\n10nF\n100.0uF\n100nF\nOverload protection: 220Vrms\nDiode\n0V~1.0V\nOn-Off\n<50Ω\nGeneral Specification\nDisplay\nDisplay Type\n2.8 inch64K color TFT\nDisplay Resolution\n320 horizontal by 240 vertical pixels\nDisplay Contrast\nAdjustable\nPower Supply\nSupply Voltage\n100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A\nPower Consumption\n<2.5W\nFuse\nT, 3A\nBattery\n2600mA*2\nEnvironmental\nOperating Temperature\n0~50 °C (32~122 °F)\nStorage Temperature\n-40~+71 °C (-40~159.8 °F)\nHumidity\n≤+104℉(≤+40°C): ≤90% relative humidity\n106℉~122℉ (+41°C ~50°C): ≤60% relative humidity\nCooling Method\nConvection\nAltitude\nOperating and\n3,000m (10,000 feet)\nNonoperating\nMechanical Shock\nRandom Vibration\n0.31gRMS from 50Hz to 500Hz, 10 minutes on each axis\nNonoperating\n2.46gRMS from 5Hz to 500Hz, 10 minutes on each axis\nOperating\n50g, 11ms, half sine\nMechanical\nDimension\n199 x 98x 40mm (L x W x H)\nWeight\n624g\nStandard Accessories\nProbe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1\nProbe*1,Clip Probe*2, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1\nProbe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1\nProbe*1,Clip Probe*1, Type Charging Cable*1, Power Adapter*1, Multimeter Probe*1"}]}]} - summary:

The Hantek 2D72 is a two-channel, 70MHz bandwidth, portable oscilloscope with a built-in four-digit Digital Multimeter and Waveform Generator. It features a 2.8-inch colour TFT display for maximum readability and is powered from an internal rechargeable battery or main power adapter.

It is compact and portable making it ideal for use on a small table or propped against electronics in the field. The case has been designed to be impact resistant with a fine touch feeling and excellent heat resistance.

A 2-hour battery charge will keep the scope running continuously for a whole working day or 2 months on standby.

The instrument can be connected to a host supplied and is supplied with software for Win 7/8/9/10, 32 and 64-bit.